How to open the run in period of new Ruizhi, and what should I pay attention to during the run in pe

1: Do not let the engine speed be too high.

The run-in period is the process of engine grinding and grinding, too high speed will damage the surface of the uneven axle, so we should pay more attention to the engine speed, no matter how many gears, the speed should not exceed 3000 rpm, such as automatic transmission should not exceed 3500 rpm.

2: Do not hold one gear for a long time.

Some friends in order to make the car fast past the run-in period, often hang five or four gears, in order to grind the car and grind the car, do not know that this will make the engine age rapidly, the surface is uneven under the premise, and it is a long time of physical work, the machine can not stand it (automatic transmission does not need to be considered). The correct approach is to take proper care of each gear, and run all kinds of road conditions.

3: Don't drive in low gear for long periods of time.

During the run-in period, it is best not to drive in first or second gear for a long time. The long running time of the low gear will bring damage to the gearbox, and we can choose the high and low gears to cooperate with each other for running-in.

4: Do not drive the car with weight.

During the run-in period, the lighter the car, the better, it is best not to pull five people to run around at once, and the weight of the machine will also be damaged. Don't pull heavy objects either.

The following points should be paid attention to during the run-in period:

1) When driving a vehicle, you should try to avoid high-speed driving, long-distance driving, and full load driving, and try to let the engine have a warm-up process before driving, so that the internal parts of the engine can be fully lubricated.

2) First of all, it is necessary to strictly control the speed and engine speed, and try not to exceed 90 kilometers per hour and the speed of the engine should not exceed 3000 rpm during the run-in period, so as not to cause excessive load on the engine and gearbox and other components, but also try not to let the vehicle be in a low-speed driving state for a long time, and change gears in a timely manner during the driving process, so that the gearbox can be fully run-in.

3) In the process of driving, it is necessary to avoid the operation of rapid acceleration and sudden braking, because this kind of operation is easy to cause a large impact on the engine, gearbox, braking system, chassis and suspension.

The REZ adopts FR front-engine rear-wheel drive technology. The lateral support is strong when cornering, the body is more stable at high speed, and the filtering skills of undulating roads are also perfected; Even when the throttle depth is increased to the limit, the rear wheels that drive the drive still bite the ground. The 6-speed automatic manual transmission of Ruizhi is well matched to the engine, and the transmission understands the driver's intentions very well, and the upshifts and downshifts are quite fast, and there is no obvious frustration.

Try not to exceed 2500 rpm and 100 yards per hour. The fuel consumption of the car should be around 9. My run-in is good, and now it is generally 10 points and about 8 at high speed.

The run-in period is generally recommended to be 3000 kilometers, slow walking and slow stopping within 3000 kilometers, the maximum speed should not exceed 80 kilometers per hour, and the relative speed will not be higher than 2500-3000. After 3000 kilometers, it can be used normally after a maintenance. I just bought Ruizhi before, and I did this, and there is no problem with it now.

For the vehicle run-in is: the most important aspect of the new car run-in period is also to always pay attention to, to run 3500 kilometers of the run-in period, which is to ensure that the machine parts are fully contacted, friction, adaptation, the basic mileage of stereotype, but be careful not to run long distances.

1. The new car has been cold run-in before leaving the factory, but in order to maintain the best condition of the mechanical system and prolong the service life in the future, it is recommended that the first 1500 kilometers must be carefully driven to drive your car and maintain it in stages.

Second, high speed can also increase the load of the engine and transmission parts. Therefore, the speed of the vehicle should be controlled within the specified range. Between 1000 km and 1500 km, the engine speed and vehicle speed can be gradually increased to the maximum acquiescence speed.

It is not allowed to drive in first gear or at high speed for long periods of time.

3. Since the parts are still in the running-in period, excessive load and excessive speed will aggravate the impact on the parts. In addition, the car should also pay attention to avoid emergency braking as much as possible during the run-in period, and pay attention to preheating when starting the cold car.

For the first warranty of the vehicle, it is recommended that you listen to the maintenance suggestions of the 4S shop, which is required by the factory according to the characteristics of the engine, and is a more technical maintenance guide.

Before the first warranty is the run-in period, because when the new car is driven, due to the run-in relationship, there are a lot of metal particles in the oil, and the run-in period is to grind off some invisible metal particles on the engine like cylinder pistons, so the oil will be easy to get dirtyTherefore, it is not recommended to drive too hard before the first insurance, because the oil is dirty, and if it is turned too strong, it will accelerate the engine wear, and once the engine is almost cartridged after the first insurance, the inside of the engine is very smooth, and there will be no large-scale metal particles.

Toyota's first warranty for new cars is: 5,000 kilometers or 6 months, whichever comes first. It is usually recommended to do the first insurance a little earlier, for example, 4000 km or 3-5 months.

One is that there are some metal chips in the oil during the run-in period, and if the oil is not changed before the high-speed, it is not good for the engine when the high-speed is pulled; One is that some metal chips will be "grinded" down during the high-speed pulling process, and the oil should be changed immediately after the high-speed pulling. If you do both, you will have to spend two maintenance dollars in one maintenance cycle. If you want to save some money, you should pull the highway early and go for maintenance right after.

In fact, the first way to pull the high-speed, Toyota manufacturers do not have written and verbal requirements, you can go to the run-in period to increase the speed of the car appropriately, so that the engine, transmission computer to establish the data under high-speed working conditions.

Due to processing and assembly errors, the frictional resistance of the moving parts of the new car is always much greater than normal when it starts to run, and the running-in (also known as walking) effect in the early stage of the car will have a great impact on the service life, working reliability and economy of the car. Therefore, the run-in regulations must be strictly implemented when using new cars.

1. Run-in regulations for new cars within 1000 kilometers:

1) Never drive at full speed.

2) - Generally not to drive at a speed of more than 100 km/h.

3) Avoid driving at high speeds in all gears.

2) The run-in of the vehicle between 1,000 and 15,000 km: it can be gradually increased to the maximum speed or at the maximum permissible speed of the engine.

2. After the run-in period, attention should be paid to:

1) When driving a car with a tachometer and shifting into the approaching high speed, the maximum engine speed allowed for a short time is 5 500 rpm when the pointer reaches the red indication zone at the latest. The maximum permissible speed in each gear is 40 kmh in the first gear, 65 kmh in the second gear, 100 kmh in the third gear, 135 km/h in the fourth gear, and 165 kmh in the fifth gear.

2) Avoid running the engine at unnecessarily high revs, and switch to high gear early to save fuel and reduce noise.

3) Do not drive the engine speed too low, and only change to low gear when the engine is working hard.

4) The speeds and rotational speeds listed in the instructions are only applicable to engines with normal temperatures. When driving cold, do not allow the engine to work at the highest revs, whether in neutral or in other gears.

5) New tires don't have optimal adhesion when they start with use, so new tires also need to be walked, slower for the first 100 km, and driven with care.

6) The new brake friction plate also needs to be run-in, in the first 200 kilometers of driving, there is not yet the ideal friction, if the braking effect is slightly worse at this stage, the pressure of the pedal can be appropriately increased. The same applies after each subsequent replacement of the brake pads.

7) Under possible conditions, the new car should avoid continuous driving for a long time during the run-in period, so as to avoid the engine and chassis parts continue to work for too long, resulting in the aggravation of the wear of the parts, and directly affect the service life of the car. Also avoid running at full load, generally in the first 1000 kilometers of driving, it is best to run below 80% of the rated load. Also, try to avoid driving at high speeds, and don't go faster than 70% of the top speed with the throttle open for the first 2,000 km/h.

8) during the run-in of the new car, the driver should heat up in situ after the new car starts at the beginning, and then start after the water temperature rises to the working temperature range, and should choose a good road surface during driving, and slow down when the road condition is poor; When driving, the throttle should be smaller, the operation should be light, once the engine or chassis sound is found to be abnormal, it should be stopped to check the fault in the embryonic period.