The eight generation Accord key failed to ask for help, and the eight generation Accord smart key co

To unscrew the screw on the key first.

After unscrewing the screw, slowly open the plastic shell.

After disassembling the plastic shell, and then disassembling the part with the chip, this is the main part to be cleaned.

Wipe down the oily areas on the battery with a paper towel (if possible, use a hair dryer.)

Blow it a little).

Then there is the compression, which is the part that is in contact with the battery, and it may become loose after a long time, resulting in the failure or failure of the remote control.

Press the battery tablet by hand to give it a stronger tension to contact the battery.

The rubber keys should also be wiped and wiped, and this is all the parts after disassembly.

Finally, just install it back in reverse according to the order of removing the key.

If the key fob fails, either the remote control is out of battery, or there is a problem with the anti-theft system.

Causes: There are many reasons for failure, one is that the battery is dead or the battery is in poor contact; In the second case, the time control module fails, which will also cause the remote control to not work; The third situation is due to the aging of the antenna of the remote control transmitter on the car, etc., which will also cause this situation. In this case, you can go to the repair station to check and fix it.

In addition, after some cars are pasted with explosion-proof solar film, when the remote control door is opened directly in front of the vehicle, there will also be a phenomenon that the remote control door lock does not respond, because this explosion-proof solar film shields the remote control signal to a certain extent.

Therefore, in the process of use, it is necessary to avoid contact with some strong magnetic fields for intelligence, such as high-voltage lines, transmission towers and other places where there are strong magnetic field signals, and try to avoid vehicle parking, because of the use of low-intensity radio waves, so it may not work normally in the case of magnetic field interference. In addition, try not to throw it away when in use, because most cases are relatively strong, but frequent dropping can cause poor contact with the internal battery.

Summary. Hello, if the smart key cannot open the door, there are many reasons for failure. The first point is to consider the loss of battery power, resulting in the vehicle not responding.

The second point is that the smart key is damaged. Resulting in the inability to fire. The third point is that the smart key control unit is damaged and cannot receive the signal.

Point 4: Consider the door lock or a broken door. Point 5: Consider the interference caused by the installation outside. If you check first, first check whether the vehicle battery is charged and whether the vehicle can be turned on.

If the vehicle can be opened, then check whether the smart key is normal, focusing on whether the smart key is lit up in the process of pressing. If there is a red dot lit, it means that the smart key can send a signal. Next, you need to check the lock block of the four doors and trunk, as well as the door light switch.

A door can be detected by pressing the smart key. In addition, if the above is normal, first remove the installed electronic components, if it is not possible after dismantling, in this case, you need to use a professional diagnostic instrument, enter the door lock in the body system, read the signal of the lower door lock, focus on which door is triggered, and the control unit is damaged.

How to solve the problem that the eighth-generation Accord smart key can't open the door.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, if the smart key cannot open the door, there are many reasons for failure. The first point is to consider the loss of battery power, resulting in the vehicle not responding. The second point is that the smart key is damaged.

Resulting in the inability to fire. The third point is that the smart key control unit is damaged and cannot receive the signal. Point 4: Consider the door lock or a broken door.

Point 5: Consider the interference caused by the installation outside. If you check first, first check whether the vehicle battery is charged and whether the vehicle can be turned on. If the vehicle can be opened, then check whether the smart key is normal, focusing on whether the smart key is lit up in the process of pressing.

If there is a red dot lit, it means that the smart key can send a signal. Next, you need to check the lock block of the four doors and trunk, as well as the door light switch. A door can be detected by pressing the smart key.

In addition, if the above is normal, first remove the installed electronic components, if it is not possible after dismantling, in this case, you need to use a professional diagnostic instrument, enter the door lock in the body system, read the signal of the lower door lock, focus on which door is triggered, and the control unit is damaged.

1.The reason why the Accord key can't be pulled out:

1) It may be a misoperation.

2) Poor lubrication.

2.The solution to the Accord key that can't be pulled out:

1) Turn off the ignition and press it in and out again.

2) The gear must be hung in the P gear, as long as the P gear is slightly stuck, it can't be down.

3) Grind the pencil lead, go in and try it, graphite can have a lubricating effect.

Extended information: Accord, a practitioner of Honda's innovative spirit and world-leading technology, has a global history of 38 years. In September 2013, Guangqi Honda's ninth-generation Accord, China's first model equipped with Honda's "Earth Dream Technology", was unveiled.

In terms of eliminating variation in ground contact area during high-speed cornering, Michelin has adopted variable ground contact area technology on the PSS, and the Deluxe Edition uses 215 60R16 Michelin tires.

How to close the alarm of the eight-generation Accord mechanical key to open the door is as follows: 1. Check whether the lighting equipment is closed. If the vehicle does not turn off the headlights after turning off, then the driver will send an alarm when the driver opens the door to remind the driver to turn off the lights, at this time we only need to twist the light knob to the off position and the alarm sound will disappear; 2. Start the vehicle.

If you use the remote key when you lock the car, but use the mechanical key when unlocking, the vehicle's alarm will sound. In fact, we only need to start the vehicle alarm and the sound will disappear automatically; 3. Press the unlock button of the vehicle. If the owner uses a mechanical key when opening the door, the alarm system will be triggered, and when the alarm rings, we can press the unlock button on the key, and the alarm will disappear.

Summary. Hello eight generations Accord mechanical key to open the door alarm how to close the key to open the door alarm how to solve the key to open the door will trigger the vehicle's alarm system, we can eliminate the alarm sound through the following three methods; 1. Start the vehicle. When you press the start button, the vehicle's alarm system will automatically turn off, and the alarm sound will disappear. 2. Press the unlock button on the key.

After pressing the unlock button, the vehicle's alarm system will also be automatically turned off, and the vehicle can be used as usual when it is started; 3. Press the unlock button on the door handle. Some vehicles will have a black plastic button on the door handle, and the alarm system will automatically turn off when the owner presses the button.

Dear hello, I am glad to be able to serve you according to your description of the eight generations Accord mechanical key to open the door alarm how to close as follows.

Hello eight generations Accord mechanical key to open the door alarm how to close the key to open the door alarm how to solve the key to open the door will trigger the vehicle's alarm system, we can eliminate the alarm sound through the following three quiet hole methods; 1. Start the vehicle. When you press the start button, the vehicle's alarm system will automatically shut down, and the alarm sound will disappear at this time; 2. Press the unlock button on the key. After pressing the unlock button, the alarm system of the vehicle will also be automatically turned off, and the vehicle can be used as usual when it is started; 3. Press the unlock button on the door handle.

Some vehicles will have a black plastic button on the door handle, and the alarm system will automatically turn off when the owner presses the button.

Hello, important things to say twice, use the key to open the door to report the infiltration of the hidden police, how to solve the problem of using the key to open the door will trigger the vehicle's alarm system, we can eliminate the alarm sound through the following three methods; 1. Start the vehicle. When you press the start button, the vehicle's alarm system will automatically shut down, and the alarm sound will disappear at this time; 2. Press the unlock button on the key. After pressing the unlock button, the vehicle's alarm system will also be automatically turned off, and the vehicle can be used as usual when it is started; 3. Press the unlock button on the door handle.

Some vehicles will have a black plastic button on the door handle, and the alarm system will automatically close when the owner presses the button.

Hello dear, can the mechanical key alarm be permanently turned off? Yes, but not recommended. Because the mechanical key alarm is actually realized through the vehicle's alarm system, it is not possible to just turn off the mechanical key alarm function.

If we turn off the mechanical key alarm, it means that the vehicle alarm system is turned off, and the vehicle will regret not being able to sound the alarm in the event of theft or other situations. Secondly, the frequency of using mechanical keys is not high, and it is really not worth it to turn off the vehicle alarm system because of the mechanical key alarm.

Dear Kiss is happy to serve you Ten generations of Accord keys have a malfunction treatment method: first of all, it is necessary to figure out what causes it to fail, and then to be able to "prescribe the right medicine" to deal with it, the more common causes of failure and solutions are as follows: 1. The steam key battery is out of power:

If it is said that the key is out of power and it fails, then our car owner can charge it and use it again. We can use a multimeter to detect the voltage of the battery, or see if the power indicator is dimmed to judge, when the battery voltage is detected to reach the specified voltage or the indicator is very dark, it means that there is no power. 2. The chip of the car key is broken:

If the battery is found to be okay after testing, then it is possible that the chip of the key is broken and needs to be replaced by our car owner to continue to use it. However, the chip of the remote control key is relatively small, it will be more troublesome to replace, and it will be paired with the vehicle after replacement, so it is best for our car owners to go to a professional repair shop for replacement. 3. The signal transceiver is broken

If the key is fully charged and the chip is not broken, but it is still in a state of failure, then it is possible that the signal transceiver is broken, and naturally the vehicle will not be able to receive the working signal from the key normally, in this case, the owner is best to go to the repair shop to check and replace. 4. The current environment interferes with the key: if the key battery, chip, and signal transceiver are fine, it may be because the current environmental magnetic field of the key is too strong, resulting in the failure of the remote control key.

The last thing to remind the owner is that when we usually use the remote control key, if the vehicle cannot be started when the distance is a little farther, then it is necessary to replace the battery of the remote control key in time, so as not to be able to use it normally during subsequent use.

The Yashiro Accord has keyless entry. The Honda Accord's one-button start button is located in the bottom left corner of the center control screen. After the owner enters the cab with the key, the ignition can be started without inserting the key, and the eighth generation, the ninth generation, and the tenth generation all have a one-button start function, which is part of the smart car, and is a button device to achieve a simple start process, which can be started with one button and can also be turned off.

The principle of keyless entryKeyless entry system refers to an intelligent system that uses advanced RFID radio frequency technology and identity coding recognition system, which does not need to open the door or start the vehicle through the traditional mechanical key, only needs a key equipped with a smart chip to sense the vehicle, and when stepping into the specified range, the system can identify the authorized driver and automatically open the door.