What is the naming convention of Onda motherboard? Please, 3Q

It is named according to the chip used.

There are generally several ways to look at the motherboard model:

1.Check the model number of the motherboard from the motherboard logo. (For example, if you are on the edge of the motherboard or in the corner of one side, the ISA slot.)

An imprint was found nearby'p5i430tx

titanium

ib+'indicates that this is a piece of titanium

IB+'s motherboard. ）

2.Confirm the version of the BIOS when the system boots. (For example: when booting the system, if the screen says 'P5I430TX T1B+.)

1998' then you can confirm that the BIOS version of this motherboard is now.

3.Check the PCB version from the motherboard identification. (For example, if you find a print on the edge of your motherboard.)'

A small label or mark, which means that this is a PCB

version of the motherboard.

The answer supplement is generally in.

Beiqiao chips. Neighborhood.

If not. You can start.

After. After the graphics card is detected.

Second. black and white windows.

See the sponsorship model.

If it doesn't work. You can go online and get next.

everest

With him can be detected.

As for the sponsoring model, the detection is possible without a driver.

The answer is supplemented. 1.Take a look at the box and instructions.

2.Check the boot screen.

If you can't find the motherboard's packaging and instructions, and if there are no labels on the motherboard, you can see information about the motherboard and BIOS when the computer boots up for self-testing. This is done by pressing the pause break key on the keyboard when the system detects memory, so that the detection process of the system is paused. Usually the first (or the first two lines) on the screen are information about the BIOS, as shown in the image on the right, Amerian

megatrends，inc.It is the name of the company that produces Amibios; Next is the model number of the motherboard, such as the A5169MS

Indicates yes. Msi.

MSI) is the current version of the Amibios MS-5169 motherboard.

4.Use test software.

There are some test software that can measure the hardware configuration of the computer, such as the motherboard, CPU, graphics card, sound card, etc., and can be used to test the motherboard type of the computer. However, these test software may not be able to recognize the type of hardware that has recently been released, or may be misclassified. Due to the strict requirements for upgrading the BIOS, the model specifications must be exactly corresponding, if you get the wrong motherboard type or the upgrade program is faulty, the consequences will be very serious, so please try to determine the motherboard model of the computer in the first three ways.

The model number of the motherboard is generally the brand at the front, the chipset in the middle, and the model number at the back.

It is his model that is represented.

It's not very clear, but I know that G means that the motherboard has an integrated graphics chip.

chinese software develop net

China Software Development Alliance.

Hello! First of all, it's definitely better (unless it's a shrink version) and secondly, why just a PCI slot! I think there are two reasons:

First, this motherboard form factor is a micro ATX (small board is generally 1-2 PCI slots) design, which is not allowed in the whole layout! (objectively)!

Second: the board has been equipped with a graphics card, sound card, network card, basically the entire general hardware system has been laid out! If there are more PCI slots, you will be idle (not necessary)!

If you want to add multiple expansion cards, it is recommended that you change to a large board (basically there are 3-4 PCI slots) I hope it will help you!

The new board has a high degree of integration, and there are very few PCIs now, which is enough for home use.

From Onda G31CV to should be the same series of plates.

Since they are all acceptable, it shouldn't be too far off.

Projector plugs? - No integrated graphics card for it! Then you have a better graphics card.

If you don't have the old version, use this. It's useless if you want more PCI slots, you have to connect the projector. What interface do you want?,Now projectors are still VGA ports,If you don't have this port,You can buy a DVI to VGA interface。

Boss, you want to buy cheap and full features, how is it possible? Onda's G31 series was originally a very serious shrinkage, if you want to buy a complete interface, buy MSI or Gigabyte's 500 or so G41...

Hard disk activation refers to the process by which the drive that is the system partition is not set to "Active".

Your situation should be unable to find the hard drive, recommended:

1. Try changing the data cable of the hard disk;

2. Try to change the socket of the hard disk on the motherboard (there are generally 4 SATA interfaces);

3. Try putting the hard drive on someone else's motherboard; 、

If you don't understand it very well, you have to send it to a special place, mainly because it involves important personal data.

4. Try a different hard drive.

If it still doesn't work to change the hard drive, it can only be a motherboard problem, and it should also be sent to a professional for inspection.

After investigation, Onda does not have a motherboard of the K8UX model, nor does it have a K series.

ASUS has one called: K8U-X, Dingxing has one called: TM-K8U89L, and Gigabyte has two called: GA-K8U and GA-K8U-939.

Let's talk about ASUS K8U-X

This is the CPU slot:

Back interface: <>

As can be seen, there is no HDMI interface.

I haven't heard of this model or this series of motherboards at all, ASUS GIGABYTE has it.