How to export a drill gong with the M25 command on cam350 and how to use it. 50

Updated on number 2024-05-20
14 answers
  1. Anonymous users2024-02-11

    M48 --- the beginning of the program.

    Metric, the unit is metric, and the format is 3 after 3. , p= represents the drill bit, and after the equal sign is the size of the knife it uses. , t2 = represents the milling cutter, followed by its tool holder number, and after the equal sign is the size of the cutter. ,t3=

    The upper part is the header.

    The drill bit is used for fixing the tool holder.

    The M25 --- the beginning of typography.

    M01--- Start typesetting.

    This line represents 3 times in the direction of y.

    M08 ---row end sign.

    M30 --- end of drilling.

  2. Anonymous users2024-02-10

    I've seen that those that only do one PCS manually input coordinates and M25, and each PCS is measured out and then entered. I generally do it in copying.

  3. Anonymous users2024-02-09

    Did the friend solve it? I'm looking for the same answer.

  4. Anonymous users2024-02-08

    The command is: file==>export==>drill data

    Then the pop-up window, the file name column selects the name of the layer to be exported, the layer that is not the drill belt will be blocked, and only the drill layer can be exported. If you have more than one drill layer, you can choose to export one or more.

    On the right is the format, the default is: imperial, leading zero, absolute coordinate system. If you don't have to, don't change the options on the right.

  5. Anonymous users2024-02-07

    You're using auto-turning, right? Lots of questions automatically, there are gong belt tutorials inside.

  6. Anonymous users2024-02-06

    If the gong belt is the first step is to convert the outer frame into the gong belt (and set the tool first) the second step is to choose how to go and the third step is to export it.

  7. Anonymous users2024-02-05

    This is obvious.,You don't have a 3:3 metric export.,When you take the test to import cam350.,The unit switch will be like a Zen failure.。

    You must know that the imperial system can omit a mil, while the metric system can only guarantee 3 decimal places in genesis, which is too different.

  8. Anonymous users2024-02-04

    1. Open the software cam350.

    2. Select the menu bar: file->import->autoimport.

    3. Select the folder where Gerber is located and click the Finish button to complete the loading.

    4. After opening, the gerber is layered by different colors as shown in the figure below.

    5. Now you can view the PCB version, display and hide the unwanted layers, select Design Data->Layers-> select the layer you want to operate, and right-click Hide Seleced Layers.

    6. Modify the color of the layer.

  9. Anonymous users2024-02-03

    You can export the gerber file first, and then open the gerber file in the form of a notebook.

  10. Anonymous users2024-02-02

    After DXF introduces the 350, the drill hole looks like a circle, not a solid circle.

    First distinguish the drilled holes, turn the ring into a solid one, then GBR to DRL, and finally export the drill hole.

  11. Anonymous users2024-02-01

    First go to NC Editor: Tools and NC Editor, then Gerber to Dirll from Utilities and then Export Dirll Date to File Pay attention to the format of the output.

  12. Anonymous users2024-01-31

    It is advisable to give up! Isn't it better to do than to do cam treatment! Tired like a dead donkey, earning that little money, now Shenzhen veterans are 4k-5k.

    You're a newbie, and you'll only be able to cam350, which is too limited. Larger factories don't need cam350, smaller factories you can't stand alone, companies have to train you, and the treatment is difficult to go up.

  13. Anonymous users2024-01-30

    CAM engineers basically need to convert PCB to GBR, of course, this is very simple, and you will become more familiar with a few more files.

    As for GBR to PCB, you don't have to think about it, this is unrealistic.

    There is also a problem, there are many software designed for PCB, and there are basically only two types of Protel family that are commonly used.

    pads.

    As long as these two are familiar, the problem of 95% PCB conversion is basically solved.

  14. Anonymous users2024-01-29

    Circuit board factories generally don't use CAM350.

    PCB manufacturers also do not need to convert Gerber to PCB.

    You're talking about a job that's more like a copy board company.

Related questions
8 answers2024-05-20

CAM (Computer Aided Manufacturing) mainly refers to:The use of computer assistance to complete the whole process from production preparation to product manufacturing activities, that is, through the direct or indirect computer and manufacturing process and production equipment link, the computer system for the planning and management of the manufacturing process and the control and operation of production equipment, the processing of product manufacturing process required data, control and processing of materials (blanks and parts, etc.) flow, product testing and inspection, etc. >>>More

8 answers2024-05-20

1. Roewe body size 4521*1788*1492 mm. The Roewe 350 is a compact sedan launched by SAIC Motor after the Roewe 750 and Roewe 550 in the A-segment market, and it is also the first family sedan to incorporate 3G technology. >>>More

5 answers2024-05-20

The new S350 is good.

The engine is the latest development, and the chassis is good. >>>More

3 answers2024-05-20

Traffic activities are an indispensable part of our lives, traffic civilization is an extremely important part of urban civilization, and the degree of traffic civilization depends on the quality of traffic behavior of citizens. It is the duty of every citizen to jointly build a civilized traffic environment. The 2008 Olympic Games were held in Beijing, the capital of our country, in order to further enhance the traffic safety and traffic civilization awareness of middle school students, and cooperate with the development of traffic civilization construction activities of "welcoming the Olympic Games, stressing civilization and establishing a new style", for this reason, we propose to all students in the school: >>>More

12 answers2024-05-20

To the west, a remnant sun shot diagonally from the barren mountain, and everything on the ground was covered in a blur of blood. >>>More