What if the brakes of an automatic transmission car suddenly fail, and what if the handbrake also fa

Composure is a prerequisiteWhen encountering brake failure, the first thing to do is to calm down, do not operate casually, grasp the steering wheel, release the accelerator pedal, and turn on the double flashing lights of the hazard warning lights; Try to apply the brakes a few more timesOnce there is an accident with the brake, you must know how to repeatedly press the brake several times, which will put pressure on the braking system with air in the oil pipe, and it may be possible to restore part of the braking force; Hand self-integrated downshiftCars with automatic manual transmissions can be switched to manual mode for downshift braking; The car with automatic transmission can be put into 2nd gear and then in L gear, and remember not to be in and R gear, and try not to be in N gear.

Handbrake fitThe downshift braking of automatic transmission models is generally not as effective as manual transmission, but it can also be decelerated with the handbrake; If you hit the electronic parking brake, you can try to pull up and press several times until the vehicle stops, and then engage into P gear. Take advantage of roadside obstaclesIn the end, there is no way, you can only use the bumper, carriage and other rigid parts of the car and the natural obstacles on the side of the road, rocks, trees or soil slopes) friction, collision, to achieve the purpose of forced parking and escape, as far as possible to reduce the accident loss, this method can be used uphill and downhill brake failure. In addition to the brake failure that may be caused by the weather, other human factors such as misoperation and poor maintenance can be completely avoided, so let's have a snack.

It's important to practice good driving habits! When driving on flat roads, you should always pay attention to the braking situation, once you find that the braking distance has become longer, the brakes are not effective, you should pull over or slow down in time, and you can not continue to drive at high speed. Vehicles driving on the highway shall stop in the emergency lane in time and call for rescue.

When the automatic transmission car finds that the vehicle's brakes are out of order, release the accelerator pedal first, hang the gear to the manual transmission, and lower it from the high gear to the low gear in turn. Among them, the automatic transmission model generally does not have the braking effect of the manual transmission model downshift, some models will also prohibit the automatic transmission downshift in order to protect the gearbox, so each gear should be lowered with the handbrake to reduce the speed and then reduce the gear in turn, the same, when pulling the handbrake, the unbrake button should be pressed, the handbrake should be pulled continuously for a while, and can not be pulled to death, the same is true for the electronic handbrake, press after pulling up, until the vehicle stops and hangs to the parking gear.

Forcibly turn off the engine for emergency braking, and you need to pay more attention to inspection and maintenance.

If the vehicle's handbrake and brakes fail, the only way to slow down is to brake slowly and let the vehicle slow down. Then look at the roadside to see if there is a place for emergency braking, and reduce the loss of people and property as much as possible.

The driver should calmly and quickly disengage from the high-speed gear, shift the high-speed gear to the low-speed gear, and use the traction resistance of the engine to reduce the speed of the vehicle. In addition, the handbrake should be used in conjunction with the low-speed gear change, but it should be noted that the handbrake cannot be tightened at one time, nor can it be pulled too slowly. Look in the left and right mirrors at any time, observe the oncoming cars from behind, slowly change lanes when conditions allow, until you reach the outermost lane, and then press the brake pedal continuously to see if the brakes are really out of order.

If the brakes have some effect, stop the car and call for a tow truck.

If the brakes fail, we have to try to slow down the car by using forced gear reduction (commonly known as gear rushing). If you're in an automatic transmission, try pressing the brake pedal down to force the brakes to reduce the speed to a very low speed, and then push the gear lever to N gear (neutral) to slow down.

R gear in the car forward: the car can not be hung into R gear in high-speed progress, even if you can push the mechanical gear lever to the R position, even if the instrument has shown R, but the actual gear at this time is also on standby in N gear, and the protection mechanism of the gearbox will never make a command to cut into R gear, and the handbrake must not be pulled in place in one step. Pulling the handbrake directly can cause the vehicle to slip, lose control, or even roll over.

If there is a ramp, you can pull the handbrake slightly and control it according to the specific situation.

For manual parking, it is necessary to quickly tighten - quick release - and then quickly tighten the cycle and pull the handbrake to simulate the ABS function until it stops; If it is electronic parking, directly buckle the parking button, electronic parking has a simulated ABS function, for 100 kilometers per hour speed, parking generally has a deceleration effect. If the above methods do not work, use objects on both sides of the road that can cause friction with the tires to reduce the speed of the car and slow it down. As a last resort, in an emergency, you should decisively use the bumper, carriage and other rigid parts of the car to collide with natural obstacles (rocks, trees or dirt slopes) on the side of the road to achieve the purpose of forcibly stopping and escaping.

At this time, you must keep calm, and then hit a double flash to remind other vehicles to see you, and then find an open and safe place to park the car, and be sure to slow down during the process.

If something like this happens suddenly, you should turn off the fire, or just turn off the key, and then call the police in time.

At this time, you should quickly downshift, slowly reduce the speed of the car, and then immediately go to the traffic police, and turn on the double flash, waiting for the traffic police to rescue.

When the automatic transmission brake fails, the driver mainly keeps calm, holds the steering wheel, releases the accelerator pedal to slow down, releases the accelerator pedal, and turns on the double flashing lights.

Find a safe area and pull the handbrake directly, so that you can quickly turn off the ignition, and it will also avoid other accidents, and you must also learn some safe braking techniques.

At this time, you can put down the handbrake and shift to first gear, so that the speed of the car can be slowly reduced.

In this case, you must not refuel the car He Yingsheng, and at the same time, you should also pay attention to the stability of the car, try to choose to go uphill, and Zen Feng must step on the clutch, and when the speed reaches a certain situation, you must pull the handbrake.

Adjust your mentality first, don't be in a hurry, don't panic then argue, slowly step on the brakes with your feet, slowly let the car approach to a safe area, pull the handbrake with your hand, let the car Sun Zhaoque stop step by step, and call the road emergency to guess the repentance.

You can slowly reduce your speed, grasp the steering wheel, and slowly pull over. When stopped, call SOS** and adjust the brakes.

If the brakes of the automatic transmission fail, I think this problem should be solved as soon as possible, and we can go to the relevant repair shop to repair it.

When the brakes fail, many people panic. However, at this time, you must not lose your way and you need to calm down. Before anything happens, hold the steering wheel tightly and then turn on the double flash warning wheels to shake high other vehicles do not approach here to prevent disturbing or affecting innocent vehicles.

At the same time, you should never apply the brakes too often and should relax slowly. Because brake failure can be the result of a temporary failure of the brake fluid. If the car's automatic brakes fail, the following needs to be handled:

1.Keep gear in D and continue to apply the brakes without letting go. At this point, the speed is gradually slowed down, and gradually decreased under the control of the engine.

2.Control the direction and keep it steady. Thanks to the presence of ABS, even when Dong Chun stepped on the brakes, he could move the steering wheel slightly to avoid obstacles and avoid excessive tension.

3.If necessary, you can switch to P mode, press the wax ruler brake and tighten the handbrake. Although it can cause damage to the vehicle, safety is paramount.

Treatment of brake failure of automatic transmission car: 1. If the brake failure of the car suddenly occurs while driving, it should calmly and quickly get rid of the high-speed gear and bomb a foot of empty oil, change the high-speed gear to the low-speed gear, and use the traction resistance of the engine to reduce the speed; 2. When changing low-speed gears, the handbrake should be used in combination, but it should be noted that the handbrake cannot be tightened at one time, nor can it be pulled too slowly; If it is pulled too tightly, it is easy to make the brake disc "lock", and it is likely to damage the transmission parts and lose the braking ability; If it is pulled too slowly, the brake disc will wear and ablate and lose its braking effect; 3. If the danger cannot be relieved, use objects on both sides of the road that can rub against the tires to reduce the speed of the vehicle and stop slowly; 4. As a last resort, in an emergency, we should decisively use the bumper, carriage and other rigid parts of the car to collide with natural obstacles (rocks, trees or soil slopes) on the side of the road to achieve the purpose of forcibly stopping and getting out of danger and reducing accident losses as much as possible.

In front of me, I had a manual transmission brake and accelerator together what to do. This time, I thought what to do if the automatic transmission brakes failed. First of all, it's good that there are no throttle failures, so it's relatively easy to deal with.

Unlike the Mercedes-Benz of the year, which cruised at a constant speed of 120, it was a failure of the accelerator and brakes. I don't know if it's true or not. Let's talk about what to do if the brakes of an automatic transmission car fail.

First of all, don't panic. Try not to panic. If you panic, you will be confused.

At this time, press the brake pedal continuously and stop pressing the accelerator. Then turn on the hazard warning lights. If you don't step on the gas pedal anymore, the vehicle will slow down.

If it's a downhill or turning section, put it in manual mode and downshift. Rely on engine and gear receleration. If it is an electronic parking brake, it can hold the electronic parking brake all the time, and after a certain period of time, it will slow down the vehicle and stop.

If it's not an electronic handbrake, then release the handbrake to slow down the vehicle, or you can stop. If the vehicle really can't slow down, then drive to the escape lane if there is an escape lane, and rub the guardrail on the side of the road to slow the vehicle down if there is no escape lane. In fact, as long as the gear is empty, the power will be cut off.

If it's not a downhill or a sharp turn, a normal vehicle will slowly stop on its own. Even when going downhill or making sharp turns, the handbrake can be used to slow down the vehicle. After all, there is no power output, the vehicle relies on inertia, and it is not a big problem.

Handling of automatic transmission car brake failure: Empty return to maintain D gear and continue to step on the brakes. Because the foot has left the throttle, under the constraints of the engine, the speed of the car will gradually decrease; Of course there is a process.

Because of the presence of ABS, even if you apply the brakes, the steering wheel can move slightly, avoid obstacles, and stay calm. How to deal with the bucket section of the automatic transmission brake failure: 1.

When the car suddenly brakes fail while driving, you should calmly and quickly disengage the high-speed gear and blow the oil, change the high-speed gear to the low-speed gear, and use the traction resistance of the engine to reduce the speed; 2.When changing the low gear, the handbrake should be used together, but it should be noted that the handbrake can be tightened at one time, and it cannot be pulled too slowly; If it is pulled too tightly, it is easy to "lock" the brake disc, which may damage the transmission parts and lose the braking ability; If you pull too slowly, the brake disc will wear out and ablate and lose its braking function; 3.If the danger cannot be ruled out, use objects on both sides of the road that can rub against the tires to reduce the speed of the car and stop slowly; 4.

As a last resort, in an emergency, decisively use the bumper, compartment and other rigid parts of the car to collide with natural obstacles (rocks, trees or slopes) on the side of the road to achieve the purpose of forced parking and escape, and reduce accident losses as much as possible.

How to deal with brake failure of automatic transmission cars:

1. Keep D gear, keep stepping on the brakes and be careful about the car, and don't let go. Since the foot leaves the throttle, under the control of the engine, the speed will gradually decrease;

2. At this time, you need to hold the direction and wait. Thanks to ABS, the steering wheel can move slightly to avoid obstacles even when the brakes are pressed, so there is no need to be too nervous;

3. You can force into P gear and pull the handbrake while stepping on the brakes, but this will damage the car, but safety is the most important.