I REMEMBER THE SIZE OF EACH DISK, CAN YOU USE THE WINDOWS XP INSTALLER TO PARTITION THE PARTITION DA

You can use XP partitions, but after partitioning, you have to format everything first!

The system disk has a partition function, and the partition where the system is located will be automatically grid during installation, and other new partitions will be manually gridded later. Files can be recovered after partitioning, and there are many such software, which are not listed. In addition, you can use the system disk as a partitioning tool, just don't delete the system disk.

OK. You right-click on My Computer, and then click on Manage, there's a disk management inside there.

You can click on it to see the current condition of your disk.

It is possible to partition inside. It's simple.

It won't take more than 1 minute.

NTFS partition and FAT32 partition are supported.

Find me if you have a question.

In the process of using a computer, we often need to partition the disk. Recently, there have been many XP system computer users who have asked how to partition the disk in the process of installing WinXP system.

Next, I will share with you how to quickly set up disk partitions in WinXP during the installation process.

Recommended:

1.Start the computer, press the DEL button to enter the BIOS setup program, set the "FirstbootDevice" option to "CD-ROM" in "AdvancedBiosFeatures", change the first boot disk to "CD-ROM", save the BIOS settings, and restart the computer.

2.Put the WindowsXP installation disc into the optical drive. After the system boots from the optical drive, the installer will automatically detect the hardware configuration of the computer, extract the necessary installation files from the installation disc, and then the Welcome to Installer screen will appear.

Press enter to continue, the Windows license agreement appears, press F8 to accept the agreement. Then an interface will appear showing the hard drive partition information.

In this example, only one hard disk is configured in the current computer, and all the empty compartments of the hard disk are used as a partition, that is, system partition C. If the hard disk has never been partitioned, you can skip the step of deleting the hard disk and go directly to creating a new partition.

3.Move the cursor to the partition you want to delete, press the d key according to the system prompt to delete the partition, the system will appear a confirmation message, if you want to delete this partition, press the enter key; If you want to discard the deletion, press the Esc key to cancel. Press the Enter key to confirm, you will enter the next interface, if you are sure to delete the partition, press the L key to confirm; If you want to abandon the deletion operation, press the Esc key to return to the previous page.

4.After the partition is successfully deleted, the system automatically returns to the partition list page. In this example, all the hard disk partitions have been deleted, so only one "unpartitioned" appears in the partition list.

5.Let's create the first partition. Move the cursor to "Undivided Space", press the C key to create a new partition according to the system prompts, enter the size of the partition you want to create at the cursor, and then press the Enter key to confirm, and the partition will be created successfully.

Move the cursor to Unpartitioned Space and repeat the steps you just did to create a partition to divide the following partitions.

6.When prompted, move your cursor over the partition where you want to install the operating system, press Enter to confirm, and the option to format the partition will appear.

7.Please select the corresponding option according to your needs to format the partition, move the cursor to the option that meets the requirements, and press the enter key to confirm, and the system will enter the disk formatting interface. Once the partition format is complete, the system will automatically proceed to the subsequent installation steps.

The above is the method of WinXP to quickly set up disk partitions during the installation process, and users who need it may wish to follow the steps to share the step-by-step settings.

Partition Detailed Steps:

1.Open Disk Management; Right-click the unassigned space and click New Disk Partition. Open the New Disk Partition Wizard and click Next.

2.If you already have a primary disk partition, you can select "Extended Disk Partition" for all the remaining space, and create an extended disk partition first. Then right-click on the extended disk partition to create one or more logical partitions.

3.You can also directly select "Primary Disk Partition" to create a primary disk partition.

Note: Windows XP cannot have more than 4 primary disk partitions. (Take creating a primary disk partition as an example:).

Enter the partition size as needed; (If the space is small, it is recommended not to change it and create a partition directly; ）

4.Click Next; Select the drive letter (drive letter) and click Next. It is recommended to select a file system: NTFS input personalized volume labels; and check "Perform Quick Format"; Click Next; Click Finish;

5.Start formatting the corresponding disk partition; The formatting is complete and the display is in good condition; The partition can be used normally.

Make a system boot disk, or use the big peach tool software to make a system USB flash drive, which has a PE system and can repartition the hard disk.

Go to the special partitioning tool to the USB flash drive, and then the USB flash drive will be launched.

If you partition it, you need to format the hard drive ......Which area is formatted and which one is partitioned with PE into the system and partitioned with the partition tool under PE ......

I have helped many friends solve this problem, and the answer on the Internet is as follows:

Please don't divide it directly, you first subtract the space you want to give to the C drive from the D drive, and then restart the pending application, use it to complete the restart, open the hard disk again, the magic master - the C drive - reallocate the free space - the space just divided into the C drive application OK

Just install the optical drive, and you can partition it. Do not use a USB flash drive, or hard disk to install.

After installing the system, it can also be partitioned.

The original Microsoft image disk is fully installed, and it can be partitioned. Most of the online versions are clones that can't be partitioned.

XP comes with a built-in formatting and partitioning program during the installation process, so you don't need to operate under DOS. It's okay for the landlord to say so.

Of course, you're not a low-level format. You just delete a partition and build it again.

Strictly speaking, if you delete all partitioned tables and then rewrite them, the deletion of partitioned tables will only be deleted after the logical partition is removed, and then the primary partition is removed. Suffice it to say, unless you delete all the partitions and then recreate them, it's not low.

When installing XP, you only need to choose to format the partition, and then select the file format you need to format, there is no need to delete the partition and then create it, and the installation disk of XP does not have a low-level formatting function, you can rest assured.

Don't just use low-level formatting in the future, unless you are infected with a partition table virus or have a physical failure (you can't solve it all, but you can give it a try).

Because the low grid is a lossy hard disk. It does a lot of long writes to every partition of the hard drive. Generally, only when it leaves the factory, the hard disk will be lowered once, and you only need to create a partition, and then you can go higher.