vivox20plus card 1 card 2 data switching

The vivo X20plus series is available in vivo X20plus A full Netcom version and vivo X20plus mobile full Netcom version. There is no difference between the two models in terms of hardware configuration, mainly in the network support.

vivo X20Plus A full Netcom version: support China Mobile, China Unicom, and China Telecom SIM cards; The data network can be manually switched through the settings - dual SIM and mobile network - data, and card 1 and card 2 can be set arbitrarily as network cards; Two telecom cards cannot be used at the same time.

vivo X20Plus Mobile Full Netcom Edition: Support Mobile, China Unicom, and Telecom SIM cards; If you use a mobile card and a non-mobile card (China Unicom or China Telecom card), the mobile card will be automatically locked as a network card and cannot be modified through settings. If you use two mobile cards or two non-mobile cards (China Unicom card, China Telecom card), you can manually switch the data network through the settings, and arbitrarily set card 1 and card 2 as network cards; Two telecom cards cannot be used at the same time.

It is recommended to go to the official website of vivo - X series - x20plus to view the details of parameter information.

Go to Settings --SIM Card Management --Data Connection and select the card you want.

You can do it as follows:

1. Find the settings icon in the desktop of the phone to enter the settings interface.

2. Select Dual SIM & Mobile Network in the settings.

3. Enter the dual SIM and mobile network and click the data to switch.

The method of switching traffic between vivoX20 dual SIM can be achieved by following the following steps:

1. Click the settings icon on the vivox20 mobile desktop to enter.

2. Enter the settings list menu and click on the Dual SIM and Mobile Network options to enter.

<>4. Change move 1 to move 2.

First, click the "Settings" icon on the desktop of the vivo X20 Plus phone, as shown in the figure below.

2. Then select the "Dual SIM and Mobile Network" option in the settings interface of your phone, as shown in the figure below.

3. Then open the "group data" in the two-code guess card and mobile network interface, as shown in the figure below.

Fourth, finally, in the data interface, you can check the SIM card that you want to use traffic data, as shown in the figure below.

The steps are as follows. 1. Open the vivox20plus mobile phone and enter the main interface of the mobile phone.

2. On the main interface of the vivox20plus phone, find the settings app.

3 In the settings, you can see that there is an option for dual SIM and mobile network, click to enter.

4 Dual SIM with Mobile Network Rock Blind Inside there is an option for data and then click on Data.

Extended content What is a dual-SIM dual-standby mobile phone?

Summary. How to switch the network card of vivo X9plus mobile phone: Go to Settings --- Dual SIM and Mobile Network - Data, and you can select the corresponding SIM card as the default network card.

Steps:

1. Click Settings on the standby desktop.

2. Dual SIM and mobile network.

3. Data. 4. Select the corresponding SIM card as the default network card.

How does vivo X9Plus switch between card 1 and card 2 data networks?

Hello, I'm glad to answer for you, I've seen your question and I'm sorting out the answer, please wait a while

Vivo X9Plus mobile phone to switch network card method: enter the setting of Na Na Rang --- dual SIM and mobile network - data, you can select the corresponding Mu Rang SIM card as the default Internet access card Li bureau card.

Steps:

1. Click Settings on the standby desktop.

2. Dual SIM and mobile network.

3. Data. 4. Select the corresponding SIM card as the default network card.

1.After entering Settings-General-Network-Cellular Data, the Chain Travel option will pop up, and you can choose sim1 and sim2 to turn off.

<>2.Select card 2 to answer that you can use the data of card 2 to surf the Internet, and you can set network settings such as access points when you enter the dual-SIM network. You can also choose to use the corresponding SIM card to access the Internet when you turn on the mobile network from the notification bar.

Tool Material: vivo phone.

1.First, wake up your phone and enter the desktop of your phone.

2.Click the operation on the desktop of the mobile phone to enter the setting operation page.

3.After entering the settings, you can see the option of dual SIM and mobile network, click to enter.

4.Find the data under the default SIM card and click to enter.

5.At this time, two cards will appear, and you can switch the card that needs to access the Internet according to your needs.

Summary. Vivo X20Plus mobile phone can go to Settings --- Dual SIM and Mobile Network - Data, you can select the corresponding SIM card as the default network card.

Mobile customized version model: the default priority mobile card is the network card, and the data of the China Unicom telecom card can only be used after the mobile card is turned off; If both cards are mobile cards or both cards are not mobile cards, you can still switch network cards independently.

What should I do if the option to switch networks with dual SIM is missing for vivoX20plus.

vivo X20plus mobile phone can go to Settings --- Dual SIM and Mobile Network - Data, you can select the corresponding SIM card as the default Internet Rock Return Mining Card. Customized model: The default priority mobile card is the network card, and the data of the China Unicom telecom card can only be used after the mobile card is turned off; If both cards are mobile cards or both cards are not mobile cards, you can still switch network cards independently.

I just don't have that option.

So I can't change it.

Maybe card 2 doesn't show up.