How to set up a router as a switch, how to set up a router as a switch

After talking about the simple method steps, we can turn the router into a switch to use. Below I have sorted out the relevant methods of how to set up a router as a switch for you, I hope it will help you!

The following describes how to set up a router as a switch.

1.Go to the router and disable the DHCP function.

2.All the wires are plugged into the LAN port of the router, and the WAN port is used as a switch when it is not empty. ADSL Internet access, the router can dial by itself, and the switch needs a computer to dial, a simple analogy, you use the router, as long as the first time the machine IP, routing settings are set, as long as the route is on, several machines can be turned on to access the Internet, and the switch, there needs to be a host for dialing, the host is off, other machines will not be able to access the network, need to re-dial.

When you set the router to prevent it from autodialing, the router becomes a switch.

The second router can turn off DHCP and change the IP address (preferably to two different network segments).

3 There are two ways to connect. 1. The LAN port of Route A is connected to the LAN port of Route B. DHCP of route B needs to be disabled, and no other settings need to be set.

4. The LAN port of Route A connects to the WAN port of Route B. You need to set Route B to a static IP address to access the Internet

or dynamic IP address, which must be set to the same CIDR block as Route A.

DNS indicates the IP address of the local DNS or route A. The LAN port of Route B must be set to a different CIDR block from Route A, and DHCP must be enabled.

For example, the IP address of route A is set to Static IP address: and route B is set to static IP address: and the subnet is set.

5 Advantages and disadvantages: In method 1, the computers under route B and route A are both in the same network segment.

It is convenient to set up a local area network. In method 2, the computers under the two routers are in different network segments, and it is difficult to form a local area network, and the advantage of method 2 is that all computers are connected to route B to crack the network operator's blocked route.

You may also like:1How does a router work as a switch?

2.How does a router act as a switch.

3.How the router is set up as a switch.

4.How to set up TPLim as a switch tutorial.

5.How to set up a router as a switch.

Connect the computer to the router with a network cable, then power on the router and turn on the computer at the same time to ensure that the computer automatically obtains the IP address and DNS server address.

<>4.Automatically enter the management interface of the router, and click "Route Settings" in the interface

<>6.Locate the "DHCP Server" point of the router and save it.

7.Then find the "LAN port setting", set it to manual mode, modify the management IP address to the different IP addresses of the same network segment of the main route, and then save it, then the router is set as a wireless switch (wireless AP).

When a router is a switch, generally when there are two routers, the second router is used as the switch. Let me talk about the specific operation.

01 Leave the first router alone. Disconnect the second router from the first one, connect it to the power supply, and connect one of the router's LAN ports to the computer with a network cable.

03 Click "Network Parameters" on the left side of the router management page, and then click "LAN Port Settings" below.

04 Change the IP address to the same network segment as the first router in the LAN port settings on the right (the IP address of the first router is, but the last digit should not be the same.) Click "Save" below.

05 Click "DHCP Server" on the left again, and select "DHCP Service" from the list that appears.

06 Click "Disable" next to "DHCP Service" on the right to disable the DHCP service. Click "Save". After that, connect any LAN port of the first router to the LAN port of the second router to make the second router a switch.