Where is the welding certificate reviewed and where is the welder certificate reviewed?

The welding certificate review needs to be brought with the review certificate andID cardThe copy shall be handled at the training center under the city safety production supervision and administration bureau.

The specific methods and requirements are as follows:

According to the Special Operations Personnel.

Article 22 of the Regulations on the Management of Safety Technology Training and Assessment, Special Operation Certificate.

If a review is required, the applicant or the applicant's employer shall, within 60 days before the expiration of the period, submit an application to the original examination and certification authority or the examination and certification authority at the place of employment, and submit the following materials:

1) A health certificate issued by a community or medical institution at or above the county level.

2) Engaging in special operations.

3) Records of passing safety training examinations.

Where it is necessary to extend the renewal of the special operation certificate upon the expiration of the validity period, it shall apply for an extension of review in accordance with the provisions of the preceding paragraph.

According to Article 21 of the "Regulations on the Management of Safety Technical Training and Assessment of Special Operations Personnel".

The special operation certificate is reviewed once every 3 years.

Article 37 Where the examination and certification authority or the unit entrusted by it and its staff abuse their power, dereliction of duty, or twist the law for personal gain in the evaluation, issuance and review of special operations personnel, they shall be given administrative sanctions in accordance with law.

where a crime is constituted, criminal responsibility is pursued in accordance with law.

Article 38 Production and business operation units.

Failure to establish and improve the files of special operations personnel shall be given a warning and a fine of less than 10,000 yuan.

Article 39 If a production and business operation entity uses special operations personnel who have not obtained a special operation certificate to work on the job, it shall be ordered to make corrections within a time limit and may be fined less than 50,000 yuan; If the correction is not made within the time limit, it shall be ordered to suspend production and business for rectification, and a fine of between 50,000 and 100,000 yuan shall be imposed, and the directly responsible managers and other directly responsible personnel shall be fined between 10,000 and 20,000 yuan.

If a coal mining enterprise uses special operators who have not obtained a special operation certificate to work on the job, it shall be punished in accordance with the provisions of the Special Provisions on the Prevention of Coal Mine Production Safety Accidents.

Article 40 Where a production and business operation entity illegally prints, forges, or resells a special operation certificate, or uses a special operation certificate that is illegally printed, forged, or resold, it shall be given a warning and imposed a fine of not less than 10,000 yuan but not more than 30,000 yuan; where a crime is constituted, criminal responsibility is pursued in accordance with law.

Article 41 Where special operations personnel forge or alter special operation permits or use forged special operation permits, they shall be given a warning and imposed a fine of not less than 1,000 yuan but not more than 5,000 yuan.

Where special operations personnel lend, transfer, or fraudulently use special operations operation certificates, they shall be given a warning and fined between 2,000 and 10,000 yuan.

The above content refers to: Encyclopedia - Special Operations Personnel.

You can register for a review on the world.

The review of the welder's certificate is generally carried out in the local human resources and social security bureau or the municipal safety supervision bureau, and under normal circumstances, the human resources and social security bureau will conduct an annual inspection of the fairness.

The welder's certificate can be examined locally annually.

(1) The operation certificate of special personnel shall be reviewed once every three years; Special operations personnel must participate in knowledge update training for the review, and after passing the results, go through the review (renewal) procedures; The special operation personnel shall submit an application for review to the review agency 3 months before the expiration of the review period indicated in the certificate, and the overdue certificate will be automatically invalidated.

2) One of the following conditions is unqualified, which is unqualified for the review:

1. Be in good health, without diseases and physiological defects that hinder the corresponding type of work;

2. There was no safety production accident during the review period;

3. Submit an application for review within the review time specified in the certificate;

4. The review must participate in the review knowledge update training and pass the examination;

5. Under the age of 60.

Materials to be submitted for review: original operation certificate of special operation personnel; Original ID card; 2 one-inch bareheaded recent photos.

3) The time required for the review shall be completed within 2 working days after receiving the retaliatory review materials from the training institution and approved by the Provincial Work Safety Supervision Bureau, and shall not exceed 35 working days.

Questions. Review to where the review is made.

The welder's certificate is reviewed to the Labor Bureau for verification.

Questions. I've been a welder for 6 years and want to review it.

Just go to your local labor office.

Questions. Okay thank you. You are welcome.

Hello Oh The welder certificate is reviewed by the original assessment and certification authority or the assessment and certification authority in the place of practice, and the review process is: 1. Confirm whether the online information of the welder certificate is consistent with the certificate information; 2. Submit 4 one-inch color photos with a white background, an electronic file**, a copy of the electrician's certificate and ID card required for the review; 3. Study for one day after submitting the materials; 4. Take the exam; 5. After passing the examination, the welder certificate will be replaced with a new one, and there will be a review record on the Internet. The job responsibilities of a welder are:

1. Weld the products arranged by the supervisor every day; 2. Maintain and maintain the machine before and after the shift every day, and sort out the site for 5S; 3. Report the failure of equipment and tools to the section leader; 4. Responsible for the cleaning and lubrication of fixtures and tooling to ensure the correct storage every day.

You can take a look at it.

Summary. The whole process is roughly like this, welder certificate review steps: 1. Generally, before the review begins, we need to prepare five two-inch photos, the original ID card and several copies of the ID card.

2. The general review time will be one month before your welder certificate is about to expire, and the materials that need to be reviewed for the welder certificate will be submitted to the Safety Supervision Bureau. 3. We also need to show a local health certificate, because welders belong to special practitioners and have certain physical requirements. 4. The general review also requires an on-site examination, which requires fingerprints and online Q&A, which are not very difficult.

5. Some places cannot carry out cross-provincial processing review, in the face of this situation, it is best for us to find the local ** for negotiation. 6. Now there are many popular substitute audits, in fact, this is not responsible for themselves and society, after being discovered, the serious ones will cancel the qualification of welders, so the difficult review is still recommended to do it yourself.

The welder's certificate is reviewed in **.

The address for review is the local safety supervision bureau.

That is, the Work Safety Supervision and Administration Bureau.

The whole process is roughly like this, welder certificate review steps: 1. Generally, before the review begins, we need to prepare five two-inch photos, the original ID card and several copies of the ID card. 2. The general review time will be one month before your welder certificate is about to expire, and the materials that need to be reviewed for the welder certificate will be submitted to the Safety Supervision Bureau.

3. We also need to show a local health certificate, because welders belong to special practitioners and have certain physical requirements. 4. The general review also requires an on-site examination, which requires fingerprints and online Q&A, which are not very difficult. 5. Some places cannot carry out cross-provincial processing review, in the face of this situation, it is best for us to find the local ** for negotiation.

6. Now there are many popular substitute audits, in fact, this is not responsible for themselves and society, after being discovered, the serious ones will cancel the qualification of welders, so the difficult review is still recommended to do it yourself.

1. Can the welder's certificate be reviewed after it expires? It depends on how long it is overdue, and it can be reviewed within half a year of expiration, and it is best to review it 30-50 days before expiration. 2. Do I need to take an exam for the review of the welder's certificate?

Whether it is a new examination, a review, or a renewal of the certificate, an examination is required. 3. Application conditions for welder certificate: 1. Age over 18 years old, under 55 years old 2, junior high school degree or above 3, no diseases that affect special operations, such as epilepsy, mental illness, heart disease, color blindness, etc.

Summary. Hello dear for your question, oh <>

The welder's certificate goes to the Work Safety Supervision and Administration Bureau. The review of the welder's certificate should go to the Work Safety Supervision and Administration Bureau. To review the welder's certificate and replace the welder's certificate when it expires, you need to go to the unit that handled the welder's certificate (prefecture-level safety supervision bureau or welding training technical school) to handle the business.

The time for the welder's certificate to be out of review is generally 3 months, and it is not more than enough to go for review. After this time, you will need to apply for a new application. The welder's certificate is suitable for gas welding and gas cutting, electrode arc welding and carbon arc gouging, submerged arc welding, gas shielded welding, plasma arc welding, electroslag welding, electron beam welding, laser welding, oxygen flux cutting, laser cutting, plasma cutting and other operations.

The welder's special on-the-job operation certificate is issued by the Safety Supervision Bureau, and the first can be universal, formerly called IC card, now called induction card, once every 3 years, the same as SFZ, as long as you have a dedicated card reader, you can read out the information in the card; But this card reader country is only for qualified units, such as schools, safety supervision bureaus, etc., this certificate no matter where you go, as long as there is a card reader where you can read the card and the annual review, the query method can also be issued by the issuing department of the safety supervision bureau, on the certificate number query.

The welder's certificate is reviewed in **.

Hello dear for your question, oh <>

The welder's certificate goes to the Work Safety Supervision and Administration Bureau. The review of the welder's certificate should go to the Work Safety Supervision and Administration Bureau. To review the welder's certificate and replace the welder's certificate when it expires, you need to go to the unit that handled the welder's certificate (prefecture-level safety supervision bureau or welding training technical school) to handle the business.

The time for the welder's certificate to be out of review is generally 3 months, and it is not more than enough to go for review. After this time, you will need to apply for a new application. The welder's certificate is suitable for gas welding and gas cutting, electrode arc welding and carbon arc gouging, submerged arc welding, gas shielded welding, plasma arc welding, electroslag welding, electron beam welding, laser welding, oxygen flux cutting, laser cutting, plasma cutting and other operations.

The welder's special on-the-job operation certificate is issued by the Safety Supervision Bureau, and the first can be universal, formerly called IC card, now called induction card, once every 3 years, the same as SFZ, as long as you have a dedicated card reader, you can read out the information in the card; But this card reader country is only for qualified units, such as schools, safety supervision bureaus, etc., this certificate no matter where you go, as long as there is a card reader where you can read the card and the annual review, the query method can also be issued by the issuing department of the safety supervision bureau, on the certificate number query.

Qinqin [Legal basis] Article 59, paragraph 1 of the "Work Safety Law", local people at or above the county level shall, according to the safety production situation within their respective administrative areas, organize relevant departments to conduct strict inspections on production and business operation units that are prone to major production safety accidents within their administrative areas.

Special operation certificate.

The review process is as follows: 1. Physical examination first, within 60 days before the expiration of the period, the applicant or the applicant's employer shall apply to the original examination and certification authority or the assessment and certification authority in Qingshu, where the practitioner is located; 2. Then go to the Safety Supervision Bureau to participate in the organization of safety theory training, and then take the exam. The special operation certificate shall be reviewed by the special operation personnel.

If the applicant or the employer submits an application within the validity period, the local assessment and certification unit shall be responsible for the verification. The review includes the following contents: 1. Health examination; 2. Check the records of illegal operations; 3. Education on new knowledge of safety production and accident cases; 4. Safety knowledge test for this type of work.

Article 17 of the Administrative Measures for the Assessment and Assessment of Safety Technical Training for Special Operations Personnel shall be signed and sealed by the review unit, and shall be confirmed by the registration unit. If the review is unqualified, Yu Zhengshou may apply to the original review unit for another review within 30 days from the date of receipt of the notice. The review unit may review again once according to the application.

If the re-examination is still unqualified or the re-examination is not carried out on time, the special operation certificate shall become invalid.

First, confirm whether the online information of the welder's certificate is consistent with the certificate information;

Submit 4 one-inch color photos with calendar on a white background, an electronic file, a copy of the electrician's certificate and ID card required for the review;

Mention which to rent and study for a day after paying the corresponding materials.