My computer accidentally turned 5 disks into one disk when it was reinstalled, how to get it back

3.Or use the WindowsXP built-in disk partitioning tool to open "Start - Run", and enter [OK to open the tool "Disk Management Console". This is the interface of the Disk Management Console.

1) Add disk partitions Right-click on the free space (where there is no partition, that is, the part marked black or light green), and select "New Disk Partition" (marked in black) or "New Logical Drive" (marked in light green). The Partition Wizard screen appears. Just click "Next".

If you have not separated the extended partition, you can select "Extended Partition", otherwise only "Primary" or "Logical" can be used. Generally, click Next directly, unless you need to increase the number of extended partitions. Enter the disk partition size in the interface below.

Proceed to Next. In the following interface, select the drive letter or access path, and click "Next" directly. In the partition boundary, select the file system, the size of the allocation unit ("cluster"), and enter the volume label.

Let's go to the next screen! Click "Finish" and the computer will start partitioning and formatting for you. (2) Delete a disk partition Right-click on the disk partition and select the one containing "Delete......The dialog box that appears should always boldly select "Yes" on it!

Note: Before deleting, close the programs and software that need to use the partition data!! 3) Just add a partition, immediately go to "My Computer" and enter its drive letter or path, you can enter it immediately, no need to restart!

Deleting a partition can also be reflected instantly! It's incomparable!

2. Open the main interface of the partition tool -- select C in the right pane -- select "Adjust Move Partition" in the partition operation in the left pane -- specify the capacity of the new C drive in the New Capacity dialog box -- OK -- click "Unallocated" in the right pane -- click "Create Partition" in the left pane -- Apply. Do this to see if you separate C. Then, using the above method, the newly separated d d is divided into ...... d, eNote:

In order to ensure that the C drive files are not lost, if the total amount of Chinese parts in your C drive is 3G, and the capacity of the C drive after setting the partition should be more than 3G, it is recommended that the C drive capacity be 8-10G.

If it's rainforest wood wind.

The ghost disk,Just put it directly in the optical drive.,The general package is unattended installation.。

1. Open the optical drive and put it into the system CD. Turn off the optical drive, press the restart button, and see if it can boot. If you can boot up, the optical drive will be very loud, and then the disc boot interface will appear, if you can't boot up, you have to set up the BIOS.

2. When starting to the boot screen, it is generally necessary to select the first item and install the system.

to the computer system.

Hard disk. If there is an option later, it is to choose whether to install the full driver. Generally defaults to the first.

3. Disc start-up to achieve fully automatic installation. When it's time to restart yourself, select the last option and boot the computer from your hard drive. At this time, restart, the task of the disc is completed, after the computer starts, the system configuration program will be automatically launched, and the software installer will be launched, choose the configuration and software you need, and finally restart, and it's OK.

Because concrete.

The system disk is not the same, and the versions of the rainforest wood wind are also different, so there should be hints when you look at the specific disc.

Turn on the computer,Put the disc into the CD-ROM drive,Restart the computer,After the CD-ROM reads the disk, select the first "install the system to the first partition",That's it,After the progress bar on the screen is finished (about 5 minutes)The computer will restart,Restart the time drive will also read the disc,You either don't move the computer,Or take out the disc before the CD-ROM reads,In short, let the computer restart into the windows interface,After entering, the system will automatically install the driver software, etc.,It's done。

It is best to use a fully automatic unattended installation disc for the system disk! When installing, just set the first boot item as a CD-ROM drive, save, reboot and you're good to go!

Press the F11 key when booting frantically, a blue dialog box will appear, select the second one and press Enter to enter.

Boot point del key,Enter the BIOS and select the optical drive to start,Generally the second option in the first column,See first、Enter select CD-ROM,Save the settings to exit the reboot and then put the disc into the optical drive,The system automatically detects the disc and your disc version will be selected,Press enter after you choose,The next thing is automatic,You can also manually set some of your own things,It's as simple as that。

I'm just for one of them.,Of course, the design to the question of how to adjust the BIOS.,Because there are many versions.,I don't know what version your computer is.,It's basically the same.,Look at it, it's all about using a USB flash drive now.,A lot of specific teaching on the Internet.。

Hope it helps.

Is there no hard disk partition?,Win7There's a partition function on the operating system that sells virtual.,It's already possible to repartition yourself with the bird.。 It is recommended that the system disk is left with a size of 20g after the system is released.

Under normal circumstances, the ghost file should be restored to the C drive, and the wrong operation will restore the image to the entire hard disk of Hongqing. Loss of the original partition caused by a mistake. If your partition structure is relatively special, simply using partition recovery software, to a large extent, may not be able to find the correct partition data, and the wrong reconstruction will destroy the original partition information and cause recovery difficulties.

If it's a notebook partition, it's often special. If you are familiar with data recovery, this situation can be easily recovered, now the computer can start the Internet normally, and the original disk can be directly restored to the original def through remote assistance

g. With the right operation, the system does not need to be reinstalled. Do not write a large amount of data to your current hard drive.

So as not to corrupt the data that may be recovered. Be sure not to repartition, format, or anything like that. In that case, the recovered data is incomplete.

Maintain the status quo. To a large extent, the original data can be completely restored with proper analysis and processing. Without the need for data recovery software to scan the recovery.

If you simply use data recovery software to scan and recover, it will take time and the effect is difficult to say. If you want to try the recovery yourself, refer to scanning the recovery with data recovery software, and remember not to write the found files to the hard drive where the problem occurred. Instead, you should restore the found data to a different hard drive first.

Make sure that the partition is correct before processing the problematic partition.