Canon 5051 machine out of E000027 0100 what s the problem?

The machine you are talking about, in fact, can be produced by a Japanese company, relatively speaking, the performance is relatively good, after entering the assembly in China, and all kinds of things and problems in it, uh, accessories, in fact, there are a lot of their own research and development, so relative to the use of it is still OK, a can correspond to the failure of **, it is also a rare problem, check the 5051 machine you said, the fault ** is 000027. This type of failure** means that your instrument is unable to search for information and connected data links. That is to say, there is a connection problem between the two of your machines and equipment, and it is located in the cache space on the computer, which is very important when the two exchange data can not be exchanged, that is to say, the two data do not have a handshake package, so the data cannot be exchanged.

In this case, you can only use it if you reinstall the driver or a new program.

This is when a fuser heating anomaly is detected and it enters protection mode. The easiest way to deal with it: If there is no problem with detecting the power supply voltage, leave the machine for a while, wait for the fuser to cool down, power on and turn on, and ignore the error message on the screen.

In this case, it is recommended that you call their after-sales service ** to see if their professional customer service has a solution?

Canon 5235 reported e000302-0001

Canon Potato Qiao 5235 report E000302-0001 Hello dear, Jialing manuscript can photocopier C3320 mention the number of Wang key display**E000302-0001, the reasons are as follows: 1. The scanning component is damaged or dirty, clean the scanning component or replace it. 2. Scan the cable of the component with poor contact, check the cable or replace it.

Hope mine is helpful to you, thank you and have a great day!

It may be that the waste toner full detection sensor is faulty - the main motor detects the full state of waste toner with the bridge for more than five consecutive seconds when it is spinning.

Since its establishment in 1937, Canon is a global leader in the production of imaging and information products.

And expand to various fields.

Canon's product line is divided into three main areas: personal products, office equipment and industrial equipment, and the main products include cameras and lenses, and digital cameras.

Printers, copiers, fax machines.

Scanners, broadcasting equipment, medical equipment, semiconductor production equipment, etc. Canon is headquartered in Tokyo, Japan.

It also has four regional sales headquarters in the Americas, Europe, Asia and Japan.

It has 200 subsidiaries around the world and employs more than 100,000 people. On March 9, 2016, Toshiba Corporation of Japan held a board meeting and finally decided to transfer its Toshiba Medical System Corporation** to Canon Inc.

Canon's proposed acquisition** is 700 billion yen (about 40.5 billion yuan).

Brand introduction. Voice.

Canon's turnover in the 2012 Global Fortune 500.

It is ranked 224th in the ranking. In 2011, Canon achieved net sales of one trillion yen (about 100 million US dollars).

In 1937, Canon was founded with the goal of manufacturing world-class cameras with optical technology. Since then, Canon has continued to develop new technologies, and in the early 70s of the 20th century, it developed Japan's first stupid-based ordinary paper copier. In the 80s, Canon first developed bubble inkjet printing technology and introduced its products to the world.

The emphasis on technology research and development has enabled Canon to grow and become a leader in its industry for decades. Canon ranked third in the U.S. for the number of patent registrations in 2012, as published by the U.S. Patent and Trademark Office.

Canon reported E015-0000

Hello, Canon newspaper E015-0000 The solution is as follows: 1. Check the power switch If the Canon printer cannot print when in use, you first need to make a detailed check on the power supply to check whether the power supply is powered on, because Canon cannot complete the printing of this source without power. If the online indicator is normal, you need to turn off the printer and then turn on the Canon printer to reprint the document.

2. Check whether the driver is corrupted or it may be that the driver is damaged. First, right-click on the printer icon, select the "Delete" button, then double-click the "Add Printer" button to reinstall the printer driver, and then print again. 3. Check whether the settings are correct, and if there is an error in the settings, the Canon printer will not be able to print.

First, click the Windows "Start" menu, select "Settings", click the "Printer" button, and open the "Printer" window. Right-click the printer icon, wait until the system pops up the shortcut menu, and click Set as Default.

There could be the following reasons:

1. Problems with the toner cartridge Non-original toner Clean it up and replace the toner.

2. The toner conveying motor is faulty, and the motor may be broken.

Solution: Remove the compact and wash it with gasoline. If it doesn't work, it's broken, but the probability of breaking is lower, so let's try it.

Summary. Canon C5051 fault **E000025-0410

Hello dear, if the e000025-0410 error occurs, you can troubleshoot it by following the steps:

1. Delete the Canon C5051 copier printing task;

2. Click Start, select Settings, select Management Tools, select Services, double-click after finding Print Spooler, and click Stop in General;

3. Click Start again, click Run, enter spool, open the printers folder, delete all the things in it, and then click Start in the General tab to select the print spooler service;

4. Disconnect the power of the copier for one minute, reconnect it and restart the computer to return to normal. It is estimated that there is a problem with the feed setting.

Canon C5051 fault **E000025-0410

Canon C5051 fault**E000025-0410 Hello dear, the E000025-0410 error can be solved by troubleshooting with the following steps: 1. Delete the Canon C5051 Copier's Eggless Printing Task; 2. Click Start, select Settings, select Management Tools, select Services, double-click after finding Print Spooler, and click Stop in General; 3. Click Start again, click Run, enter spool, open the printers folder, delete all the things in it, and then click Start in the regular selection of the service card, and select the print spooler service; 4. Disconnect the power of the copier for one minute, reconnect it and restart the computer to return to normal. It is estimated that there is a problem with the feed setting.

With this, you can't copy or print it.

What I'd like to ask is how to get it back to working properly.

1. Delete the printing task of Canon Songrang C5051 copier; 2. Click Start, select Settings, select Management Tools, select Services, double-click after finding Print Spooler, and click Stop in General; 3. Click Start again, click Run, enter spool, open the printers folder, delete all the things in it, and then click Start in the General tab to select the print spooler service; 4. Disconnect the power supply of the copier for one minute, restart the computer to return to normal after reconnecting the field crack.

Are you talking about operating from my computer?

Yes. Hello dear, please follow the above description.

Summary. Hello, dear! We're happy to answer for you!

Canon 5051 Fault**e000020-0291: The main cause is poor thermistor contact and disconnection. Heater (H1, H2) disconnected E000 Thermal switch (TS1) disconnected SSR defective DC controller printed circuit board defect.

Clear it first**If there is still a repair. The main cause is poor thermistor contact and disconnection, heater (H1, H2) disconnection, E000 thermal switch (TS1), disconnection, SSR failure, DC controller printed circuit board defect. Clear it first**If there is still a repair.

I hope my answer can help the kiss, and I wish the kiss a happy life

Canon 5051 Fault**e000020-0291 Hello oh dear! We're happy to answer for you! Canon 5051 Fault **e000020-0291:

The main reasons are poor contact and disconnection of the thermistor. Heater (H1, H2) Broken Button Talking Wire E000 Heat Switch (TS1) Broken Wire SSR Defective DC Controller Printed Circuit Board Defect. Clear it first**If there is still a repair.

The main reasons are poor thermistor connection and disconnection heater (H1, H2) disconnection, E000 thermal switch (TS1) disconnection, poor SSR, DC controller printed circuit board. Clear it first**If there is still a repair. I hope my answer can help the kiss, and I wish the kiss a happy life

Where is the E000 switch?

Where is the SSR.

Canon printer into maintenance mode method: Note: The power cord is plugged in1 in the shutdown state (the indicators are black) 2 press and hold the stop button to leak roughly, and then press and hold the power button, the power indicator light is on.

Remember to hold down the 2 buttons and don't let go) 3 The power button does not let go, after releasing the stop button, after clicking the stop button 5 times in a row, release the power button 4 The electric knowledge of the rising source light is always on (some models are green and some white indicators), and it is successful.

And then what! Focus on pro.

If you can't get it yourself, it's best to call a professional maintenance worker to repair it.

Summary. This may be caused by the end of the printer's power cord plugged in, the printing cable is not properly connected or in poor contact, the computer parallel port is damaged, etc., it is recommended that users press the printer switch to see if the printer can start. If it does not turn on (the power light does not turn on), first check whether the power cord of the printer is properly connected to the power supply and the power jack behind the printer.

Plug the power cord back in the shutdown state and try to change the power outlet to see if it solves the problem.

Canon C5240 reported E000027-0400

Hello, I'm glad to answer for you, please later, I'm working hard to sort out the answer for you, and I'll reply to you within 5 minutes.

Hello, I'm glad to answer for you, please later, I'm working hard to sort out the answer for you, and I'll reply to you within 5 minutes.

E000027-0400 Fault Code: The printer does not respond after the print command is issued.

This may be caused by the printer's power cord plugged in, the printing cable is not properly connected or in poor contact, the computer parallel port is damaged, etc., it is recommended that the user press the printer switch to see if the printer can start. If it can't be started (the power light is not on), check whether the power cord of the printer is correctly connected to the power supply and the power jack behind the printer. Plug the power cord back in the shutdown state and try to change the power outlet to see if it solves the problem.

If the printer can start normally after pressing the power switch, go to the CMOS settings to see if the parallel port settings are set correctly. Note that the main one must be turned off, and the slag must be plugged and unplugged with electricity, otherwise the printer may be damaged.

I hope I can help you, thank you for your consultation and trust, I am happy to answer for you, if you have any other questions, you can ask me at any time, I see that the town god will be you immediately. If you are satisfied with me, you can give a thumbs up and give me encouragement Finally, I wish you a happy life.

This has nothing to do with the powder mouth.

Hello, the display of e000027-0400 fault code means: after the print command is issued, the printer does not respond.