The automatic gear lever is put on the P gear, and sometimes it suddenly can t be pulled

It's because the gearbox lock hook is jammed.

There is a locking mechanism in the automatic transmission box, and when stopping, you need to pull the handbrake first, and then hang the P gear. If the P gear is hung first, the vehicle will move when it is parked on the slope, and it will also pull the gears of the gearbox to rotate, which will cause the internal lock hook to get stuck. Therefore, the handbrake must be used for long-term parking, otherwise the locking mechanism of the automatic transmission will be damaged.

The difference between P gear and N gear is also that there is a gear engagement in the gearbox when P gear, which is not only used for parking, but also helps the vehicle brake, and must push the gear to P gear after parking, and must not be hung in N gear and rely on the handbrake alone to brake, especially when parking in a place with a slope.

Hello. Pull the handbrake before the next time you hang the P gear. Then don't let go of the handbrake before taking off the P gear [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

The brake pedal must be pressed to the end [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

It's a problem with the brake switch.

Pull the handbrake before the next time you hang the P gear. Then don't let go of the handbrake until you take off the P gear.

The so-called automatic transmission does not need to change gears while driving, while manual transmission cars need to change the speed of the vehicle and the change of engine torque by switching gears at the right time.

The fuel consumption of automatic transmission cars is higher than that of manual transmission cars of the same model, about 1 liter higher per 100 kilometers. In terms of car cost, the cost of an automatic transmission is higher than that of a manual transmission of the same model.

Its advantage over manual transmissions is that they are easy to drive. In addition, automatic transmissions include continuously variable transmission, electronic paddle transmission, and electronic gear lever transmission. There are 3 types of transmissions for vehicles on the market, manual transmission, automatic transmission, and automatic manual transmission.

The vehicle can only be started in P and N gears, and the brakes must be applied to remove the gear lever from P gear. The use of N gear start is when your vehicle starts and drives directly forward, you can first turn on the power without hitting the engine, step on the brake to pull the gear to N, and then ignition, and then hang into D gear and move forward directly, so as to avoid the need to go through R gear after ignition in P gear, so that the gearbox goes through a reverse impact.

Another function is that when the ignition suddenly stops while driving, it can quickly push the gear to N gear and start the engine before starting it when it is safe to do so.

How to solve this problem.

The automatic transmission cannot hang out of the P gear for the following reasons:1. Flameout problem: For automatic transmission, some models can no longer be put on gear after turning off, and if you want to cancel the P gear, you have to start it first.

2. P gear is used as a parking gear, and when it is hung from P gear to other gears, it is necessary to step on the brakes.

3. Some models also have a gear lock function to prevent accidental contact during driving. If you want to hang to other gears, you have to press the unlock button on the gear lever, otherwise you will not be able to change gears successfully.

The automatic gear lever does not move when it is pulled, and there are several situations:

There is no brake pressing, and the P gear needs to be put on the brake to hang.

If the fire is turned off, it can't be hung up. Just restart the vehicle.

The weather is cold, and the oil of the gearbox also needs to be lubricated. Generally, it can be solved after the hot car is completed.

There is no pressing the gear lock, which is the button on the gear lever. When you are in gear from P, you need to press the gear lock.

If the car is not on flat ground, it is likely that it is due to the wrong parking step. Before talking about this question, it is important to know the correct parking steps first.

The automatic gear lever does not move when P is not pulled, first check whether the brake light is on, check the brake light switch and fuse if the brake light is not on, and check the shift solenoid valve when the brake light is on!

Questions. How to fix it.

Hello, this problem is generally caused by the following reasons,1There is a problem with the brake signal or the brake pedal is not pressed, 2The gear lever locking solenoid valve is working poorly or stuck, 3

It is caused by a problem with the computer control system of the gearbox and an open circuit of the locking solenoid valve. 【】

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately. How to fix it. Hello, this problem is generally caused by the following reasons,1

There is a problem with the brake signal or the brake pedal is not pressed, 2The gear lever locking solenoid valve is working poorly or stuck, 3It is caused by a problem with the computer control system of the gearbox and an open circuit of the locking solenoid valve.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately. 【】

Everyone has some car-related issues to a greater or lesser extent. I don't know if you have ever understood the problem that the automatic gear lever can't be pulled in P gear, if you are also interested, you may wish to take a look at Bian Xiao's introduction, I hope it can bring you some help.

The lever won't pull in P gear, and the shift may be locked.

The P-gear locking mechanism of the automatic transmission consists of a locking gear, a locking pin and a set of response mechanisms. After the car is hooked into the P gear, the cable drives the connecting ball pin. During this recess, the work pin slides to allow the locking pin pawl to tighten the parking gear.

If the gear is engaged, the gear lever cannot be pulled at this time.

If you want to put the gear lever in a different gear, you need to destroy your pants and start the car first, try to hang it in neutral, or press the brake pedal to try to change gears. When parking, you have to put in gear after parking. Because the locking mechanism of the gearbox is very fragile, if you don't stop and put the car directly into the gear, it may damage the shift mechanism of the car, so it is easy to have this situation that the stove cannot be moved in the P gear.

The shift mechanism of an automatic transmission is different from that of a manual transmission. When the car is driving, it must not coast in neutral as much as possible, which is easy to damage the internal structure of the gearbox.

How the P file works:

When the gear lever is in P gear, the car locking mechanism locks the output shaft of the gearbox, and the transmission shaft of the car will be locked, even if the brakes are not pressed, the car will cause the necessary braking force.

Automatic transmission cars sometimes can't hang up in P gear, and after a while they can hang up again.

Hello, for your question [automatic transmission car sometimes P gear can't be hung, after a while, what is going on with the Mae Heng High Energy hanging] This question is answered as follows. Automatic transmission cars sometimes can't hang up the P gear, and after a while, they can be hung up again, it should be the gear locked, or when the car is parked, there is no brake at all, and the ruler is directly hung into the P gear, resulting in gear braking, not braking brakes.

The automatic car gear lever is stuck in P gear and needs to press the forced unlock button of the gear lever, which is the bulge on the gear lever, provided that the brake pedal must be pressed, otherwise it cannot be achieved, and the specific operation steps are as follows:

1. Press the brake pedal of the car.

2. Press the car's one-button start button.

3. The instrument of the car lights up and the vehicle starts.

4. Press the force release button of the gear lever.

5. Put the automatic gear lever of the car in the D position and enter the automatic mode.

The card is issued when it is taken out of the P file.