How to remove aluminum alloy blinds, how to remove blinds

1. Manufacturers with regular aluminum alloy window signs or production licenses shall indicate the product logo in the obvious parts of their aluminum alloy products, including: manufacturer name or trademark, product name, product model or mark, manufacturing date or number. The packing box should have obvious words and signs of "moisture-proof", "handle with care" and "up".

2. Introduction to aluminum alloy door sealing performance of aluminum alloy window, choose aluminum alloy door with inlaid glass, especially products designed with insulating glass, you must pay attention to its sealing performance. If the sealing is not good, it will lead to dirt and dirt in the hollow layer, which will affect the appearance. The brand products are made of high-quality sealing strips and all-round sealing treatment with advanced hot-pressed sealing technology, which can effectively prevent dust and water, and have outstanding sound insulation effects.

3. Aluminum alloy windows are processed with high-quality aluminum

It depends on what type of right leaf window it is. If it is a square diffuser, you can use your hand to pick the first circle of blades from the outside to the inside (the outermost circle is called the outer frame) and pull it outward, but to recognize the direction, you can see one side of the two springs inside, so pull to this side;

If it is a bar diffuser, some are called 0 or 30 wire nozzles, which are generally pressed to a long side, and there is also a spring side, and the inner core will be removed;

If it is a door hinge return air outlet, it has a special spring bolt, as long as you put your finger in, pull the small handle, the blade will be removed, our company can make the door hinge without any tools, the whole blade can be removed!

We will make nearly one million aluminum alloy shutters and tuyeres in Shenzhen every month, the technology is relatively mature, the service is also quite thoughtful, and we can also do a variety of arc-shaped and special-shaped tuyeres!

To remove the shutter, as long as the box on the top of the shutter is picked up directly up, the entire shutter can be removed, and the specific operation steps are as follows:

1. First of all, go to the window and find the location of the blinds.

2. Next, you need to retract the blinds upwards.

3. Stand on a stool and lift the box holding the shutter with both hands.

4. It is easy to lift the shutter directly from the buckle on the window frame.

5. In the end, the blinds were successfully removed.

The louvered upper beam has an installation angle. Hand press this in the middle of the mounting corner (plastic part). Then buckle the front of the upper beam of the louver first, and then remove it. If you don't understand, look for me.

To remove the shutter, as long as the box on the top of the shutter is picked up directly up, the entire shutter can be removed, and the specific operation steps are as follows:

1. Find the location of the blinds.

2. Fold the blinds upwards.

3. Hold the shutter box with both hands and lift it up.

4. The shutter was lifted directly from the buckle on the window frame.

5. The blinds were removed.

The blinds are generally not removed and washed, with a brush for brushing the wall, it is estimated that the market also has a professional brush to brush the dust. If you really want to dismantle it, it depends on the type of shutter in your home, if the closed shutter is not removed, a demolition is equivalent to the installation of a new one. If it is open, push the latch open and open it like a window in a rural hometown, or push it open and brush it with a brush.

If it is a shutter in some other directions, such as an air conditioning shutter, there are manual and electric shutters that are more troublesome to brush and difficult to dismantle.

If it is a door hinged return air vent, it has a special spring latch, as long as you put your finger in and pull the small handle, the blade will be removed.

Nowadays, many homes will install blinds, which are convenient to use. How do you remove the blinds? PChouse will take you to find out.

To remove the shutter, as long as the box on the top of the shutter is picked up directly up, the entire shutter can be removed, and the specific operation steps are as follows:

1. If it is a door hinged return air outlet, there will be a special spring bolt, as long as you put your finger in and pull the small handle, it is easy to remove the blade.

2. If it is a square diffuser, you can pick the first circle of blades from the outside to the inside by hand, and then pull it outward, but to recognize the direction, you can see one side of the two springs inside, just pull to this side, be careful not to be too rude.

3. If it is a strip diffuser, some are called 0o or 30o wire nozzles, which are generally pressed to a long side, and there is also a spring side, and the inner core will be removed.

As a new type of material, blinds are not only beautiful, but also very fashionable, so they are deeply loved by the masses. But most people don't know anything about how to remove blinds, so let me introduce you to how to remove blinds.

1. Door hinged return air outlet. Usually this kind of blinds will have a special spring latch, you just need to put your finger inside, and then pull the latch with your hand, you can easily remove the blade.

2. Square diffuser. If it is this type of blind, first of all, we need to pick the first circle of blades from the outside to the inside, and then pull it in the direction of the outside, but to identify the direction, you can see the side with two springs inside, so we pull it to this side, be careful not to be too rude.

3. Strip diffuser. It is called by two names, one is called 0o nozzle, and the other is called 30o nozzle, usually the longer side is pressed, and the side with spring is also removed.

The above is the introduction of how to dismantle the blinds, do netizens understand?

Many owners will buy aluminum alloy doors and windows when installing doors and windows, which are beautiful in shape, durable, long in life, and easy to clean. If a door or window is faulty or damaged, it needs to be removed for repair or replacement. How to dismantle aluminum alloy doors and windows?

If there is no anti-theft piece for the doors and windows, you should first move the doors and windows to the middle position, support both sides of the doors and windows with both hands, and lift them upwards so that the window slots below will come out of the track, and then remove the remaining doors and windows one by one; If there is an anti-theft piece on the door or window, you should first unscrew the screw on the outside of the anti-theft piece and move the anti-theft piece to one side, and the remaining steps are the same as above.

What to pay attention to when removing aluminum alloy doors and windows.

1. Pay attention to personnel safety.

Due to the heavy weight of doors and windows, the demolition work is also more troublesome, so before demolition, the construction personnel should do corresponding protective measures, such as wearing safety helmets, gloves, etc. When dismantling, it is best to have a special person on site to supervise the work and set up warning signs, which can not only effectively protect the safety of the people present, but also ensure that the wall structure is not damaged.

2. Pay attention to the protection of the wall.

When disassembling doors and windows, it is necessary to disassemble them in strict accordance with the steps, and do not use hammers to remove doors and windows to avoid damage to the doors, windows and wall structure. If the wall structure is damaged, it will not only need to be repaired, but also increase the construction cost, and will also leave a large safety hazard.

3. Pay attention to repairing the openings of doors and windows.

When dismantling doors and windows, the openings of doors and windows will have a certain degree of damage, after the dismantling, the openings need to be viewed in time, if the size of the openings does not meet the requirements, there is damage, then it is necessary to repair the treatment, in order to ensure the installation of new doors and windows.