Those brands of Zhongxing Nine can see the manual change of PID???

No, Zhongjiu doesn't give users too much of an operating system.

How to enter the change pid:

1.If there is a list of channels: the menu --- channel browsing --- confirm--- select the channel--- press "1" - the PID code appears --- change the PID code --- confirm.

2.Without channel list: menu --- channel browsing ---2010" - system loading --- confirm--- select the station --- press "1" - the PID code appears --- change the PID code --- confirm.

This code should be asked for from the person who installed the satellite dish for you! Generally, Haier chips can enter the same code repeatedly.

Use the Zhongxing No. 9 remote control to modify the PID code to upgrade the method of cracking 46 units aHow to enter the change pid: There is a list of channels:

Menu --- channel browsing --- confirm--- select the --- press "1" - the PID code appears --- change the PID code --- confirm.

b.Without channel list: Menu --- Channel Browsing ---2010" -- System loading--- confirm --- selection desk, and the following operation is the same as above.

c.A machine that has never been upgraded will not work.

According to the different movements, the input method is different, Y series press the menu to enter 2010, press the channel to browse, press 1 to enter the PID code modification interface to modify the PID code.

Guoxin presses F1 6 times to enter and modify PID

On October 11th, the 9** device adjusted the response method and the corresponding news Based on the news of the David TV forum, starting in the early hours of this morning, the live broadcast star company adjusted the Zhongxing No. 9 No. 1 ** device, and all programs were adjusted to the number ** device in the way of compressing part of the bandwidth, and at the same time, 39 sets of radio programs in various provinces and cities were stopped, and only 4 sets of radio programs were retained. According to the analysis of the current Zhongxing-9 satellite No. 1 ** device still has information strength and signal quality, and its observation value has increased by 1-3%, the No. 1 ** device is likely to be used to broadcast encrypted programs to provide various receivers for commercial operation encrypted program testing, and the existing 46 sets of TVs will continue to be broadcast for free. From the current news seen in the David TV forum,This time9 is only an adjustment of the ** device transmission program,Not the upgrade of the star 9,All genuine receivers (including copycat machines) only need to search for a new program to receive and see 46 sets of TV、4 sets of radio programs,39 sets of radio programs in various provinces and cities will be increased in the near future。

This time, the 9** device adjustment is a big test of the performance of the copycats, the vast majority of the copycats have passed the test of the adjustment through automatic upgrades, individual models such as Gauss Bell, Tiancheng and other models due to the installation of software versions are low, and there is stagnation when upgrading to 33%. After the enthusiastic user asks the manufacturer, it can be solved in the following ways: 1

Unplug the signal cable (this step is very important); 2.Boot; 3.Select the "Menu Key" of the remote control or receiver panel; 4.

Enter "System Settings", enter "9999" in the password column (some models can enter the super password "0000"), perform "Factory Reset", and confirm; 5.Plug in the signal line; 6.Select "Manual Search", press the right volume button, select "Frequency Point 2", and confirm; 7.

Search for frequency points in turn and confirm; 8.Finish, exit the increase frequency password and method of Zhongyuan Yuanxing No. 9 special machine 1Open Menu - System Settings - Confirm - Enter *** password - Confirm - Come out:

Installation & Signal Detection ( This password is by no means four 0s) The password should be 9999 Auto Search Manual Search Factory Reset Version Information Press the line key to "manual search" - press the right button to envy: frequency point number 1 - 2 - 3 - 4 - 5 - press confirm - the second line "frequency" input *** the third line "symbol rate" input *** press confirm, the machine will start searching. There are certain differences in the software of different manufacturers, just to give you a reference.

Zhongxing No. 9 manual upgrade steps (after automatic upgrade, some machines will automatically search for no program after booting) Pull out the signal cable" and the hail collapses when the boot is turned on (the system automatically searches to complete) >Enter the menu" > System Settings >> Enter the password"9999">Factory Reset" Plug in the signal cable (can be advanced to the second step) > to manual search "Press volume + > to confirm (prompt to add channel) >Auto Search" Complete Key steps: Pull out the signal cable and password"9999, to manual search, press Volume +

Machine-to-machine upgrade method:

The middle nine machine-to-machine upgrade method requires: a parent machine - that is, a genuine machine that can currently watch and watch programs, a sub-machine - that is, only the machine that cannot be upgraded or continues to display the upgrade status, and there is a serial port line. Upgrade Steps:

1. Connect the serial cable behind the machine;

2. The mother machine is powered on, and press the F4 button three times at the same time;

3. Press OK, at this time, the face plate of the parent computer will display the imitation vertical ON (that is, the meaning of "opened");

4. The handset is powered on and opened, and the panel is displayed as a garbled sail code;

5. At the beginning of the upgrade, the panel of the parent computer shows 001 to 099, then changes to E-P, and finally changes to 001, that is, the upgrade is successful. Imitation hailstone.

No,You need to rewrite the data through the data cable,But some of the machines of the Haier chip have super passwords,You can search for the picture through the super password, but there will be a phenomenon that the sound and picture are wrong,You can adjust it manually。

It seems that I can't, but I heard that you can get the place you bought to upgrade to the next level, I haven't tried it, but I went to other places to sell and asked, and the boss said that he couldn't help me upgrade, and the ones in his store were all upgraded in the field and then came back.

If your machine supports manual input, you can watch it normally!! ~

Zhongxing No. 9 receiver audio just finished searching the image and sound do not match, you need to manually adjust it, according to the following method to do it! It's just good to use, share it! Press first"f2"Make a multi-picture face, and then press Hui Lane"The dish is a single spring order"button, and then press the left and right keys to tune the sound to the upper right corner of the image table, and press when the sound is synchronized with the image on the stage"OK"key, exit, and then change to another station and repeat the operation!

I'll answer, the password is f1 01 f2 0 2 and 9999 to press the tune mark first; Channel list key: Then press the red button, then the station you selected will appear with a red logo, you are on the arrow keys up and down the key is to tune the station mark, left and right is to tune the sound. I just researched it for you to try. It's not really a point at all.

In the ** screen interface press "F2" - "Menu" - Use "Volume +" - to adjust to sound sync.

It's useless for you to stop the signal from the TV station, and the pid goes to the Chinese star hunt. However, I still recommend that you have about 200 of the whole genuine.

Zhongxing No. 9 live broadcast machine has been fully upgraded yesterday morning to inspect the encryption,All set-top boxes that do not have regular products and envy the old serial number will not be able to watch normally,Only twelve sets of programs can be received,There is no good way to crack it at present,Don't worry,The brother who makes the black box will soon come up with countermeasures,They are more anxious than us,Wait a minute.