Where does Shihuang Expressway start and end?

The starting point of Shihuang Expressway is Shijiazhuang, and the end point is Huanghua Port.

Shihuang Expressway is an important part of Hebei Province's "five vertical, six horizontal and seven lines" expressway planning network, is to promote the west coal to the east to the sea, to promote the economic development of the central Hebei Plain and the provincial capital Shijiazhuang economic take-off channel, but also to connect the national key project Huanghua comprehensive port construction, to promote the Bohai Economic Zone and the central and southern region of the economic development of the main artery. Huangshi Expressway starts from Huanghua Port in the east, connects Shitai Expressway in the west, connects with Beijing-Shi, Shi'an, Baocang, Beijing-Shanghai, Jinshan and other expressways, and ends in Shijiazhuang. Among them, the section from Shijiazhuang to Xinji was completed and opened to traffic in December 1998, the section from Xinji to Cangzhou was completed and opened to traffic in December 2000, and the section from Cangzhou to Huanghua Port was completed and opened to traffic in October 2007.

The total length of kilometers, two-way four-lane, fully enclosed, full interchange.

Shihuang Expressway has 12 toll stations in Gaocheng East, Jinzhou, Xinji, Shenzhou West, Shenzhou East, Hengshui, Hengshui North, Wuqiang, Dachenzhuang, Huaizhen, Hecheng Street and Cuierzhuang. Shihuang Expressway is a major channel to promote the economic development of the central Hebei Plain, and it is also the main artery for transporting coal from the west to the east.

Driving route: about one kilometer starting point: Huanghua Station 1

Huanghua City Driving Plan 1) Start from the starting point due east, drive 420 meters, turn right into G205 2) Drive along G205 for kilometers, turn slightly right into Shihuang Expressway 2Drive along Shihuang Expressway for kilometers, towards Jinshan Expressway, turn slightly right into Jinshan Expressway 3Drive along the Jinshan Expressway for kilometers and go straight into Binda Expressway 4

Drive along the Binda Expressway for kilometers and go straight into Binbo Expressway 5Drive along Binbo Highway for kilometers and go straight onto Bole Highway 6Drive along Bolai Highway for kilometers and go straight onto Laixin Highway 7

Drive along the Laixin Expressway for km, towards Mengyin, and turn slightly left into Beijing-Shanghai Expressway 8Drive along the Beijing-Shanghai Expressway for km, towards Nantong, and turn slightly left into Ningtong Expressway 9Drive along the Ningtong Expressway for kilometers, towards Jiangyin Bridge, turn slightly left into Xicheng Expressway 10

Drive along Xicheng Expressway for kilometers, towards Yanjiang Expressway, turn slightly right into Yanjiang Expressway 11Drive along the Yanjiang Highway for kilometers and go straight onto A12 12Follow the A12 for km towards A30 and turn slightly right onto A30 13

Driving plan in Shanghai 1) Drive along A30 for kilometers, towards A12, turn slightly right into A12 2) Drive along A12 for kilometers and go straight into the Middle Ring Road 3) Drive along the Middle Ring Road for kilometers, towards the north-south elevated road, turn slightly right into the north-south elevated road 4) Drive along the north-south elevated road for kilometers and go straight into Yaohua Road 5) Drive along Yaohua Road for kilometers and turn right into Licheng Road 6) Drive along Licheng Road for 130 meters to the end point (on the right side of the road) Destination: Shanghai Jinjiang Inn Expo Park.

Huanghua - Shijiazhuang. Huanghua-Shijiazhuang Expressway (referred to as Shihuang Expressway, or Huangshi Expressway) is the connecting line of the "Rongwu Expressway (G18)", an important trunk line of the national expressway planning, with a total length of about 281 kilometers. The Huangshi Expressway also functions as the North Third Ring Road of Shijiazhuang in the Shijiazhuang City section.

On January 13, 2005, the former Ministry of Communications of the People's Republic of China (now the Ministry of Transport) promulgated the "China Expressway Network Plan" ("7918 Project"), and stipulated the numbering rules for the main trunk lines, regional ring lines and branch lines of the national expressway, and the branch line sequence has 37 connecting lines, including the Huanghua-Shijiazhuang Expressway (Huangshi Expressway), numbered as "National Expressway G1811".

On June 20, 2013, the Ministry of Transport of the People's Republic of China promulgated the National Highway Network Plan (2013-2030), which is also known as the "71118 Project".

Huangshi Expressway (Huanghua-Shijiazhuang Expressway), the expressway number is G1811, starting from Huanghua and ending in Shijiazhuang, with a total length of kilometers.

The Yellowstone Highway passes through the provincesSome of the cities that the Yellowstone Highway passes throughHebei: Cangzhou City, Hengshui City, Shijiazhuang City.

Huangshi Expressway Entrance and Exit Cuierzhuang Entrance and Exit Expressway: Huangshi Expressway Toll Station Name: Cuierzhuang Toll Station Huanghua East Entrance and Exit Expressway:

Huangshi Expressway Toll Station Name: Huanghua East Toll Station Cangzhou East Entrance and Exit Expressway: Huangshi Expressway Toll Station Name:

Cangzhou East Toll Station Gaocheng Entrance and Exit Expressway: Huangshi Expressway Toll Station Name: Gaocheng Toll Station Jinzhou Entrance and Exit Expressway:

Huangshi Expressway Toll Station Name: Jinju Toll Station Shiqing Road Entrance and Exit Expressway: Huangshi Expressway Toll Station Name:

Shiqing Road toll station.

The starting point of Wuhuang Expressway is the South Ring Railway Bridge of Guanshan 1st Road in Wuhan City, and ends at the Huangshi Yangtze River Bridge in Huangshi City.

The Wuhan-Huangshi Expressway refers to the Wuhan-Huangshi Expressway in Hubei, which is a two-way four-lane expressway with a total length of 70 kilometers and a toll period from September 23, 1997 to September 22, 2022, for a total of 25 years. Wuhuang Expressway connects Huangshi Yangtze River Bridge, Huangshi and Huangmei Expressway in the east, and is an important arterial road in Wuhan's urban scattered economic circle.

And through the surrounding highway network and Anhui's Hefei, Gaohebu, Jiezidun Expressway, Jiangxi Nanchang, Jiujiang Expressway, Jiujiang, Jingdezhen Expressway communication. It is connected to Yichang Wuhan Expressway in the west, and is connected to Beijing-Zhuhai Expressway and National Highway 107 in Wuhan.

It has not only become an important backbone line connecting Wuhan to Huangshi and eastern Hubei Province, but also an important part of the Shanghai-Rong National Highway connecting China's central and western regions and the eastern coastal areas, with significant line advantages.

Wuhuang Expressway

Wuhuang Expressway was built in accordance with the national first-class highway standard, and was officially opened to traffic in February 1991, with a designed daily traffic capacity of 10,000 vehicles, known as Chutian No. 1 Road.

From 0:00 on December 11, 2022, the Wuhuang Expressway will stop collecting tolls for the kilometer-long part of the Yangtze River Highway Bridge in eastern Hubei Province, and the existing toll collection facilities will be retained to operate as usual in accordance with the zero rate method, and all vehicles passing through this section will be exempted from vehicle tolls, and vehicle tolls will be collected on behalf of other road sections.

Summary. Pro, Wuhuang Expressway starts from the South Ring Railway Bridge of Guanshan Avenue in Wuhan City, and ends at the Huangshi Yangtze River Bridge in Huangshi City.

Pro, Wuhuang Expressway starts from the South Ring Railway Bridge of Guanshan Avenue in Wuhan City, and ends at the Huangshi Yangtze River Bridge in Huangshi City.

Dear, Wuhuang Expressway is a two-way four-lane highway in Nianmo, the second expressway in Hubei, and the first road in Hubei called high-speed in the name. The total length is kilometers. Wuhuang Expressway was built in accordance with the national first-class highway standard, and was officially opened to traffic in February 1991, with a designed daily traffic capacity of 10,000 vehicles, and was called "Chu Chi's first road".

Its predecessor was the Guanbao Expressway from Guanshan to Gaoshan Sanbao, and the Wuhan-Huang Expressway was formed through the link with the Shanghai-Chongqing Expressway On December 28, 2021, the No. 12 ramp of the Xinwuhuang Interchange was opened to traffic. From 0:00 on December 11, 2022, the Wuhuang Expressway (excluding the kilometer-shared part of the Yangtze River Highway Bridge in Eastern Hubei Province) will stop tolling.

Summary. From the South Ring Railway Bridge of Guanshan Avenue in Wuhan City to the Yangtze River Bridge in Huangshi City, the total length is kilometers. The Wuhuang Expressway was opened to traffic in February 1991, which is the second expressway in Hubei and the first road in Hubei that is called high-speed in terms of name.

From the South Ring Railway Jichi Bridge of Guanshan Avenue in Wuhan City to the Huangshi Yangtze River Bridge in Huangshi City, the total length is kilometers. The Wuhuang Expressway was opened to traffic in February 1991, which is the second high-speed highway in Hubei and the first road in Hubei that is called high-speed in the name.

Wuhuang Expressway, referred to as Wuhuang Expressway, refers to the speed highway from Wuhan to Huangshi in Hubei, which is a two-way four-lane expressway, starting from the South Ring Railway of Guanshan Road in Wuhan City, and ending at the Yangtze River Bridge in Huangshi Yinbend, Huangshi City, with a total length of 70 kilometers.

Summary. Hello! I'm a life expert, and I'll answer your questions.

Yangxin County. Yangxin County, under the jurisdiction of Huangshi City, is located in the southeast of Hubei, bordering Jiangxi, in the middle and lower reaches of the Yangtze River, and has always been known as the "Jingchu Gateway". The location advantage is obvious, and it is located in the "1+8" city circle of Wuhan, so the domestic transportation is very convenient.

Hello Mess! I'm a life expert, and I'll answer your questions. Jingdong Yangxin County.

Yangxin County, under the jurisdiction of Huangshi City, is located in the southeast of Hubei, bordering Jiangxi, in the middle and lower reaches of the Yangtze River, and has always been known as the "Jingchu Gateway". The location advantage is obvious, and it is located in the "1+8" urban circle of Wuhan, so the domestic transportation file is very convenient.

How many kilometers is Yangxin County from the highway exit? What is the local temperature?

Twelve kilometers. 13-18 庋.

What are the closest counties north of Yellowstone to the highway exit?

What are the nearest counties to Huangshi Huanggang and its high-speed exits?

Dear, you can navigate this specifically.

What are the closest counties in Huanggang City to the expressway?

Xishui Exit (Mawu Expressway North Exit).

It's not the same. Shihuang Expressway, this expressway is the collective name of Shitai Expressway (Shijiazhuang-Taiyuan) and Huangshi Expressway (Huanghua-Shijiazhuang); Gucheng Road is a combination of Gucheng West Road and Gucheng East Road. It is worth mentioning that the construction time of Shihuang Expressway and Gucheng Road is earlier than the construction time of Shijiazhuang City Ring Road.

The construction time of the two roads is earlier than the construction time of the stone ring road, so you can only go to the planning plan issued by Shijiazhuang City to find the answer. It can be seen from that plan: the northern line of the Shijiazhuang Ring Road starts from Beiwunu Village in the east, and then uses the two expressways of Huangshi and Shitai to reach Beixincheng Village in the west, with a total length of kilometers.

According to this planning plan, Shihuang Expressway should be the North Third Ring Road today, but things are far from so simple.

The world's largest highway cross-railway turnaround bridge on the Stone Ring Road has been successfully "turned".

After the construction of the Third Ring Road, due to various reasons such as asset replacement, project construction, and scarcity of motor vehicle traffic, Shihuang Expressway has never had the opportunity to become the real North Third Ring Road of Shijiazhuang. In this case, Shijiazhuang City** then launched Plan B, that is, to build a North Third Ring Road parallel to the Shihuang Expressway. As a result, Gucheng Road near Shihuang Expressway was included in the scope of expansion and transformation.

After the renovation, the original two-lane road was widened to four lanes, and the design speed was increased to 60 kilometers per hour. However, what is more embarrassing than Shihuang Expressway is that after arriving at the Xinyuan Expressway in Chang'an District, it has become a dead-end road, and there is still a full ten kilometers away from the East Third Ring Road! In such an embarrassing situation, Guchenglu naturally can't get the opportunity to turn positive.