How to make a bookmark with clover, how to make a bookmark with a clover ?

In **search gold well hand-inlaid silver can be made as a bookmark very beautiful.

Go find a handsome clover in the garden. Of course, if you give it away, you might as well take some time to find a four-leaf clover. Then go home and get the book.

Make 2 napkins to press. It's better to press a few more. Just in case of an accident ...

After a few days of drying, take the photo studio to make a plastic. Then make a hole and tie a ribbon or something, whatever you want. If you're in a hurry, you might as well try drying.

Theoretically, it is also clamped and then heated. Whether it's a hair dryer or a frying pan depends on your creativity...

The steps are as follows: Collect plant materials. Flowers, stems and leaves, fruits or seeds can all be used as materials for plant bookmarks, which are generally herbaceous and should not be too thick.

Flowers can choose from a thousand day red, lover grass, starry sky, zinnia, etc.; The stems and leaves can choose coleus grass, spider plant, clover, bougainvillea, etc.; Fruits or seeds can be wheat, amaranth, dog's tail grass, etc. Dry. Flatten the collected material, clamp it with a thick filter paper or other absorbent paper, and press it into a thick book for one to three weeks until the water in the plant has completely evaporated.

Devise. Draw a sketch first, and match the flowers, stems, leaves or seeds of different types of plants reasonably, regardless of color and shape, as perfect as possible. Stickup.

The flattened, dried plants are designed according to the sketch and glued to the cardboard. The color, pattern and texture of the cardboard must be reasonably matched. On the front and back of the cardboard, you can write famous quotes or blessings as needed to give them to friends.

Molding. If conditions permit, you can go to the stationery store to buy plastic film, sandwich the prepared flower and grass bookmarks in **, and use a plastic sealing machine to seal them, so that they can be stored for a long time and are not easy to be damaged. Wear ribbons.

At the top of the plastic bookmark, use a hole punching machine to make a small circular hole, and wear a small ribbon, and the color of the ribbon should be coordinated with the color of the flowers and plants. In this way, a beautiful bookmark is ready. When you open the book to read and appreciate, you will not only see the beauty of a small petal and leaf, but also the affectionate imprint of the season and the selfless gift of nature.

I did. The first method is to sandwich the clover in a book, a week later.

Take it out. Do you remember the "rose specimens" we made in the fifth grade of elementary school?

Just find a hard-dotted cardboard and tape the clover in place.

There is also a way to cover the clover directly with wide tape and stick it to cardboard, right?

Look for the kind of leaves that are big and coarse, and the color of the leaves is also very important, and you should look for leaves with shiny colors and no impurities. Then wrap the leaves in thicker, softer paper towels and press them into a thicker book. After a while, it's OK to completely get rid of it!

Then seal it with two thicker pieces of plastic film, and you're done!

The chlorophyll can be boiled by placing the leaves in a sodium hydroxide solution and boiling. Leaves clear veins. Line with thick paper and glue well. Punch a hole and put a rope on it, and it's a beautiful bookmark. The leaves can also be dyed in their favorite colors.

Choose the leaves you think are good-looking, put them in a book with a little paper, about 10 days, and if you want to be strong, you can seal it well, and it looks good if you don't seal it.

Leaf. Generally evergreen woody plants are preferred. Such as osmanthus leaves, heather leaves, papaya leaves, eucalyptus leaves, tea tree leaves, magnolia leaves, etc., sodium hydroxide, anhydrous sodium carbonate, beakers, iron racks, alcohol lamps, soft hairy old toothbrushes.

Methods Step by Step Read 1 6

Select the blade. Choose leaves with thick and dense veins. Leaf selection is made in late summer or autumn when the leaves are fully ripe and begin to age. 2/6

Cook the leaves with a 10% sodium hydroxide solution. In a stainless steel pot or iron pot, put an appropriate amount of washed lye into the prepared lye solution and boil, and then gently turn it with a glass rod or tweezers to prevent the leaves from being stacked and heated evenly. (The window should be stuck for ventilation, because there is a smell when cooking the leaves)3 6

Boil for about 5 minutes, and when the leaves turn black, take a leaf and put it in a plastic basin with clean water. Rinse carefully with water. (Note:.)

The operation must not be directly picked and placed by hand to prevent sodium hydroxide from corroding the hand surface. Pick and place with tweezers or clips. ）4/6

When the residual lye on the leaves is rinsed clean, take it out, spread the leaves on a piece of glass, use a small test tube brush or an old toothbrush with soft hair to gently brush off the rotten mesophyll on both sides of the leaf veins, and rinse it with a small flow of tap water until only the veins remain. 5/6

Soak the veins in hydrogen peroxide for 24 hours to achieve a bleaching effect. 6/6

Brush the leaf veins, rinse and dry on a glass sheet. When it is dried to a semi-dry and semi-wet state, apply all kinds of dyes required, then clamp it in old books and newspapers, absorb the water and take it out, and it can be used as a leaf vein bookmark. Use after drying.

Dye red or blue ink or other dyes into your favorite color, and then tie a colored silk ribbon on the petiole to make a leaf vein bookmark with clear leaf veins, bright color quality, beauty and practicality.

How to make leaf vein bookmarks:

The mesophyll decays when it encounters a corrosive liquid. After heating, it will rot faster. The veins are relatively tough and not easily corroded. Therefore, some leaves with hard leaves and tough veins can be made into leaf vein bookmarks.

Tools & Materials: Beaker, Tripod, Asbestos Net, Alcohol Lamp, Matches, Scales, Old Toothbrush, Tweezers, Watercolor Paint, Colored Silk Thread, Sodium Hydroxide, 3% Hydrogen Peroxide, Osmanthus Leaves.

Production process: 1 Pour about 90ml of water into a beaker, add 10 grams of sodium hydroxide to the water, put the beaker on an asbestos net, heat it with an alcohol lamp, and boil the solution.

2 Submerge the leaves in the solution, continue to heat for about 15 minutes, and gently stir with tweezers to separate the mesophyll and corrode evenly.

3 When the leaves change color and the mesophyll is crispy, remove the leaves with tweezers and place them in a glass with water.

4 Remove the leaves from the water, place them on the glass, and gently brush the front and back of the leaves with an old toothbrush in running water, brushing off the soft parts of the leaves to reveal the white veins. Immerse the leaf veins in 3% hydrogen peroxide for 24 hours to turn them pure white, then remove the leaves, wash them with clean water, and drain off the droplets.

5 The veins are dried in old books or newspapers.

6 Take out the flattened leaf vein pieces, wait for the leaf veins to dry thoroughly, apply watercolor paint on both sides of the leaf veins with a brush, and then flatten them after a little drying.

7 Take out the pigmented leaf vein piece and tie a colored silk thread to its petiole to get a delicate and beautiful leaf vein bookmark.

Description & Extension:

1. In addition to osmanthus leaves, coral, maple, mulberry, linden, poplar, hazel leaves, etc. can be used to make leaf vein bookmarks.

2. When heating, the beaker must rest on the asbestos net, if heated directly, the beaker will be broken due to uneven heating.

3. The used liquid medicine can be kept in an empty container for next use, and the general liquid medicine can be recycled 4 5 times.

4. If there are too many processed leaves, you can change the large beaker, and the water and sodium hydroxide should be 10%.

Leaf bookmarks, which can be completed with a piece of paper, are beautiful and practical to put in a book.

Draw a chubby heart first, and then turn the three identical angles and put them together point to point. That's easier said than that

First, pick a clover, take a large thick dictionary, and sandwich the clover inside. After a day, the clover will become flattened and flat. As long as you add two pieces of transparent film and glue the edges with colored ribbons, you can make both bookmarks and decorations.

It is recommended not to use the so-called color retention solution, which is useless and will only ruin your clover.

Preparation of plant specimens.

Self-invented,The simplest,Good effect of the specimen making method,Those color retention solution or something,You will regret it if you try it.,Because I tried...

When the specimen is pressed, the leaves should be wrapped in 3-5 napkins to absorb water, and then pressed into the thick book, wrapped the book tightly with plastic wrap, don't leave air in it, and then press it with a few more thick books, just until the specimen is dry, about 3-5 days, and then, you can overmold the specimen on your own bookmark, greeting card, **.

Or, just use a thick over-plastic film to over-mold.

This is very detailed, and if you can't do it, you can skip it directly.

The leaf vein bookmark is to select leaves with beautiful leaf shapes, remove the mesophyll part after chemical treatment, and keep them.

The whole leaf vein, a kind of bookmark made by dyeing.

Production method: 1. Select the blade. Choose leaves with thick and dense veins. Generally evergreen woody plants are preferred. Such as Gui.

Mosaic leaves, heather leaves, papaya leaves, eucalyptus leaves, tea tree leaves, etc. At the end of summer when the leaves are fully ripe and begin to age.

or autumn leaf selection.

2. Boil the leaves with lye. Configuration of lye: 1 liter of water, 70 grams of sodium carbonate (baking soda), hydrogen and oxygen.

50 grams of sodium (the above two drugs and chemicals are available in stores), you can also use lime water instead of lye, in an enamel cup or.

Boil the prepared lye in a clay pot and add an appropriate amount of washed leaves, bring to a boil, and gently pluck the leaves with chopsticks.

Prevents the blades from being stacked and heats them evenly. Boil for about 5 minutes, and when the leaves turn black, remove one leaf.

and place in a plastic basin with clean water. Check the mesophyll for corrosion and easy peeling, if it is easy to separate.

All the leaves are fished out and placed in a plastic basin filled with water, and then the mesophyll and veins are separated one by one.

3. Remove the mesophyll. Place the boiled leaves on the palm of your hand or on a glass plate, smoothing them with the handle of an old toothbrush.

Gently rub the leaf surface to wipe off the corroded mesophyll, then rinse under the tap and continue the rubbing.

Until all the mesophyll is removed.

4. Bleaching leaf veins. Put the brushed leaf veins in the bleach solution, bleach, remove them, and rinse them with water.

After sandwiching it in old books and newspapers, take it out after absorbing the water, and it can be used as a leaf vein bookmark.

5. Dyeing, drawing, writing. Dye it in your favorite color with red or blue ink or other dyes, or you can draw or write on it, and finally tie silk thread.

1.The maple leaves are pressed directly in a thick book for a few days and dried to become bookmarks.

2.Make bookmarks out of flowers.

4.The production of the love back needle + heart back needle bookmark.

5.**Bookmark.

1. Pick a few leaves with clear veins and tough leaves, such as mulberry leaves and osmanthus leaves.

2 Weigh 2 5 grams of sodium carbonate and grams of sodium hydroxide (or 3 grams) in a beaker, pour 100 ml of water, and put it on the fire to boil.

3 Put in the leaves and let them all soak in the solution. Continue to heat for 6 8 minutes, gently stirring with a glass rod from time to time to separate the leaves and heat evenly. The leaves are corroded by chemicals, and the soft parts are easily removed and the veins are left.

4 Remove the boiled leaves with tweezers and place them in a glass with water.

5 Take out the bleached leaves from clean water, lay them flat in a petri dish, carefully wipe off the soft parts of the leaves with a soft brush in running water to expose the clear veins, and then stick them on the glass sheet to cool and dry.

6 While the veins are still dry, apply watercolor paint with a brush (it can also be soaked in colored ink for dyeing). After cooling, place in a book and flatten. Then tie a colorful ribbon to the petiole to make a beautiful bookmark.