Win10 ubantu in which folder

Both Windows 10 and Ubuntu are installed on SSDs, of which 40GB is allocated to Ubuntu. If you have already installed Windows 10 first, you can allocate a part of the space in Disk Management to Ubuntu, here please make sure that the divided part is shown in black!! Then**UBUNTU's ISO image, burn to the U disk, shut down, reboot into the BIOS, set the U disk as the first boot, F10 save and exit the restart.

Then you will enter the installation screen of ubuntu. Select the installation language, configure it all the way as needed, and when choosing the installation location, you must choose manual configuration (I forgot the specific name in the interface, which roughly means this). At this point, you can choose the partition just divided, you can divide the boot swap into different partitions as needed, and it is also okay to simply and rudely divide all the rest of the content into the same zone.

Once you've set it up, remember where the boot is located, and you'll need it later. Then the rest of the content is to set up some general items, and finally start the installation, and when it is over, you will be asked to manually select restart. After entering Windows10, install easybcd, then add a startup item, select Linux grub2, select the boot location just now (if it is a pot end, it is the location), save and exit, and restart to see the entrance of Ubuntu.

OS Name: Microsoft Windows 10 Pro.

OS version: Build 17134

After installing the Ubuntu version, the root directory is on the C drive.

First install the VM tool in the "VM" of the virtual machine, and then copy the files inside to Linux, then unzip it, and enter the folder. First of all, root, right-click and open the "Run" checkbox. After that, run the command line:After installation, you can copy directly from the window to the virtual machine, or from the virtual machine to the window.

The details are as follows: Solving common problems with computers.

1. The hard disk controller cannot be automatically recognized.

Using non-genuine individual operating system discs, while installing the system, is prone to this error. The reason is that the hard disk controller driver that is automatically loaded by the non-genuine disc does not meet the needs of the computer itself. In this case, it is recommended to install the operating system on a genuine CD.

2. Manually update the wrong driver.

The Windows operating system works normally, but manually updating the driver turns the hard disk controller driver update error, which leads to this failure. The solution is to enter the advanced menu of the Windows system and select the last normal configuration, and then you can enter the system normally.

3. Caused by changes in BIOS settings.

The Windows operating system is fine, but due to some reasons, the user modifies the BIOS settings, resulting in 0x0000007b failure.

Oracle VM has an extension package that you can install in the menu and then in the virtual machine settings.

The virtual machine I use is VMware, after installing VMware Tools, the windows and ubuntu system will directly drag and drop the file to take effect, but the function is not completely stable, sometimes it will fail, and it needs to be reinstalled or restarted; The other way is to set up a shared folder, create a folder under Windows, set it as a shared in the virtual machine, and the shared folder will appear in the mnt hgfs directory of Ubuntu.

What virtual machine software is used? Is your physical machine installed with Windows or Ubuntu?

If you just want to copy files, you can use a USB flash drive. If it's a virtual machine shared hosting, it depends on what your virtual software is.

Give a reference.

The specific path is C: Users Administrator Desktop.

Open the following folders on the computer in turn: computer - C drive - users - computer username, you can see the folder named "desktop" or "desktop", and there are desktop files when you open it.

How to open the control panel on your computer:

Press Win+X on your keyboard. Or right-click on the start menu on the desktop to pop up options.

Select the "Control Panel" option.

Open the Control Panel.

Implement LAN shared folders on Ubuntu.

If your system is Ubuntu Or, there are two ways to share local files over a LAN on a computer running Windows or other Linux.

Passwordless sharing is provided to each user in the local area network.

Access is limited to specific areas and folder password protection is provided.

This article includes two methods where you can choose the one you want to use.

1.LAN passwordless shared folders.

Step 1: In order to share a folder on Ubuntu, right-click on the folder you want to share and select "Local Network Share".

Useful troubleshooting solution: If you don't see the "local network share" option in the context menu, create a new terminal and use the following command to install the nautlius-share plugin

sudo apt-get install nautilus-share

Then restart nautilus. You can choose to log out and log in, or use this command:

nautilus -q

Step 2: Once you click on "Local Network Share", the option to share the folder will appear. Just check the "Share this folder" item:

Possible troubleshooting: If it says that the shared service is not installed, as shown in the image below, click Install service and follow the prompts.

Step 3: Select the "Share this folder" option and you will see the "Create Share" button become clickable. You can also "allow others to create and delete fies in this Chinese folder". The same goes for the option "Guest Access".

You'll see that the folder icon is already displayed as shared. If you want to stop sharing a folder, just undo the "Share this Floder" option.

It's as simple as that, so that anyone on the LAN can access the files in the shared folder. Under normal circumstances, you would choose this way. Because, the computers in the home LAN are usually trusted computers.

But this is not always the case. What if you only want specific users to access? That's where the Samba server comes in.

We discuss this approach in the second part of this article.

Today I will share with you how to set up a shared directory folder under Ubuntu to Windows (Win7 system) users, so that you can open the shared directory folder in Ubuntu under Windows, so that it is convenient for some friends who need to use Ubuntu and Windows systems at the same time.

This experience notes:

This advice only applies to the previous version of the Ubuntu system, and the later ,。。 This experience is not applicable because the default desktop is different, so if you want to use it, please install the gnome desktop.

To share folders and directories with Windows under Ubuntu, you must first install a software in Ubuntu: SAMBA, open the terminal command line window in UBUNTU, and then enter the following command to install SAMBA:

sudo apt-get install samba

Once Samba is installed, open the directory where the folder where we want to set up the sharing is located.

Right-click on the folder you want to share and select "Share Options" from the menu that pops up

After clicking to select "Share Options", the "Folder Sharing" settings dialog box will be opened, as shown in the following figure, some settings of folder sharing are mainly set in this dialog box.

In order to better access the shared directory under Ubuntu under Windows, it is best to refer to the settings on the following surface, and click the "Create Share" button at the bottom right after setting.

After clicking the "Create Sharing" button, the prompt box shown in the figure below will pop up, this is actually the creation of the permissions we set in the previous step, click the "Automatically Add Permissions" button on the right, and the file sharing settings dialog box will be automatically closed after the setting is completed.

Go back to the directory where you want to set the shared folder to be located, and find that the folder we want to share has a small icon of a hand tray on it, which means that the folder is shared.

You can share files with "Aimi Cloud Shared Network Disk",The operation is very simple,You can share it with designated users,Share reminders System from XP to Win10,Server2012,Compatibility is very good,LinuxI don't know if it's good or not。

Step:1, Double-click to open the folder.

2. Select "View" in the menu bar

3. In the rightmost "Options" of "View", click on the options, which is "Folder Options".

One: Click on "File" - Options:

Two: Click "View" - Options - Folder Options:

The win10 system itself occupies about 16G-20G, and you need to increase the partition size appropriately according to the size of your application;

The Ubuntu system itself occupies about 12-17 GB (excluding folders such as home), and if you include folders such as home, you also need to increase the partition size according to the size of the application.

Install win10 first, then ubuntu.

Then under the window, compress a disk (generally greater than 20G) and install ubuntu. After installation, you can't see this disk under the window. But you can see the C disk of the win under ubuntu, don't mess with the things of the C disk.

Of course, grub automatically enters ubuntu in five seconds, and you need to modify the grub configuration file to enter the terminal, vim boot grub

Modify setdefault='4'

Note that it is 4 because the first ubuntu is 0

If you are talking about the desktop software shortcut, to check which folder the software is in, right-click the desktop icon to select Properties, and select the search target at the bottom left, and you will see the folder where the software is stored. If that's not what you're asking, please ask me.

How did you install Ubuntu in the first place? Remember?

I usually boot the system into LiveCD first, and then click "Install" on the desktop to install the system on the hard disk.

If you're installing something like this, then you.

First of all, you can boot to the LiveCD system through a USB flash drive, portable hard disk, or CD.

Open the terminal and run the command to install grub.

UEFI boot: (grub2 installed on 64-bit systems).

1.Mount the ESP partition to the boot efi

2.Run grub-install (run the following command with administrator privileges).

grub-mkconfig -o /boot/efi/efi/ubuntu/grub/

Remember, mount your 100M ESP partition to EFI, a subdirectory of the boot directory at the root of your 40G partition.

Method 2: Under the livecd system, check whether there is this directory under your 40G partition:

boot/grub/x86_64-efi

And there are a lot of mod files underneath that directory.

If there is, then then your grub2 is installed on the system partition and not installed on the esp partition, fix it with the following command:

bootloader-id=ubuntu --uefi-secure-boot

boot-directory=/boot

update-grub

Get admin privileges:

sudo -i