Win98 can t automatically shut down and a white screen appears, high score reward

This regret is a mobile phone system problem.,Brush the machine to solve.,If you won't, find a mobile phone store to help you brush.,It's twenty or thirty quick money.,If you have a warranty card, you'll be free after selling Zen.,If you don't have a warranty card, he'll charge you a hundred.。。 Celebrate the dust.

The program version of 3110c is too low, and formatting the phone is only a symptom rather than a cure.

It is recommended to go to a general maintenance shop to flash the machine, as long as a few dozen dollars can be solved, this is the best way to solve the problem of 3110c white screen, crash or restart.

Hard: Turn off the computer first, press and hold the "dial key, "* key" and "3" key while rebooting until the word "nokia" appears on the screen, this process cannot release any button, wait for a few seconds until "formating...... appears", then you can release the key.

3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and then re-enter the phone time.

There are a few points to note about the above grid machine:

1. Be sure to keep the phone absolutely sufficient, so it is best to fully charge it before the grid;

2. Do not try to shut down the machine during the process;

3. The charger can not be plugged in during the process, and if it is violated, it may cause serious consequences such as burn-in.

In addition, the hard grid may damage the hardware of the machine, so if it is not absolutely necessary, do not use the hard grid when the machine cannot be turned on and used.

Hehe, you take out your card, change it to another friend's domestic mobile phone, and delete all the information in it

1.Unplug the memory card and take a look. It could be a conflict.

2.Grid machine. It can only be hard-gridded.

It's not a system, it's probably because the temperature is too high, the best case is that the cable burns out, and the worst case is the screen burned.

You can see if you can pick it up**.

If you can explain it, it's a problem with the screen or the screen arrangement.

It is recommended to go to customer service to reinstall the system.

Take it to repair, it is estimated that you will have to flash the machine.

One. Soft grid: enter "*" in standby mode, prompt whether to restore all original phone settings, select "Yes", prompt to enter password, the original password is "12345", the phone will automatically restart after entering, and the format will be completed after booting;

Two. Hard grid: After powering off, press and hold the "*" 3" and "green call button" at the same time, and then press the power button to turn on the phone, until the screen appears "formating...".

If you let go of the wording, the screen will turn black from left to right, and it will automatically restart after it is completely black, and the formatting will be completed. (It is said that both formatting methods can restore the phone to the original factory settings,The same as the new one,But I have a soft grid several times after the C disk still has a large number of files,After the hard grid, only the two folders left when the new one was bought,I don't know what's going on,Look at the high finger to teach!) ）

Formatting will lead to the loss of all information stored in the phone, including business card holders and text messages, make a backup before the grid, as for you to choose the second one, press and hold "*" "3" "green call key", and then press the power button to turn on, the above is on the network I myself is to press and hold the power plus "*" key "3" key "green call key" I am also 5320 If you have a black screen or blue screen, please do it as follows, select "Settings" - Phone Settings "- General " - Personalized Selection - Screen Display - Open " Screen Save" inside has the screen saver time setting always. In the theme mode --- your phone settings --- back to Settings--- the battery saver protection --- set to "Date". So that there is no black screen or blue screen and mine is how it was solved.

If you are licensed, go directly to the mall for exchange.

If parallel imports. Generally, there is a warranty. It's all done for you for free. It's better to have a replacement.

If there is no warranty, take it to a repair shop to find someone to brush the machine. The fee is 10 yuan.

Estimated on the system issues. Don't be too nervous.

Very simple.

This one is that you are using it improperly.

Leads to system file corruption.

You can bring your phone to the place of purchase and re-flash the system.

Go get a new one, I bought it yesterday anyway, it should be replaced.

The above method is the soft grid machine I feel that the hard grid machine is more suitable, generally the boot button + green building + 3 + * four pieces press Use it a few more times My 7610 is also like this But it's just a suggestion Hard grid machine is a little dangerous Sometimes English appears To re-set it into Chinese Be cautious.

Random installation of software causes the system to crash, grid,*

It's a data problem, that is, the mobile phone has an IC that stores data, and there is a software problem, just go to the mobile phone store and brush the phone.

Maybe it's a virus.,Grid machine*,It's fine.,But there's no information at all.。 The card is still there.

You are a software problem Deg machine at the same time press and hold the dial key 3 key * key and then press the power button press and hold don't let go wait for him to appear after the boot screen appears after a line of English appears and then let go Remember that the battery must ensure that there is sufficient power.

After the white screen, it is not necessarily an automatic shutdown, if it is a flip cover, check the joint, the inspection interface of the straight board.

If the shutdown is estimated to have a short circuit' or a serious program error. Try flashing.

There is also the problem of the hardware in the mobile phone. It is recommended that the landlord take the mobile phone to the store to test it, upgrade the mobile phone, it should be possible.

My mobile phone is 5130, and it used to be like this, because there was more software ......Later, after the restoration of the appearance of the setting, it became what you said, if it is within the warranty period, it is recommended to go to the Nokia maintenance department for maintenance, and it can be guaranteed within one year, it is recommended not to mess around with it, it is difficult to get it and disassemble the business hall without authorization can not repair it for you for this reason.

They got it very fast, they didn't need to change any parts, it was just an hour.

ps:Pay attention,After repairing the phone, the new application software inside can't be used.,Show the phone or SIM card without a certificate.,You'd better let the people in the business hall get it together.,My phone just didn't pay attention and took it away.,Now QQ,UC browser can't be used.,Annoying.。

Oh, it's clear that your phone's boot program is corrupted and needs to be upgraded! As long as this fault is upgraded, it is OK, don't listen to the maintenance personnel fool you about what the motherboard is broken, what to replace or something, just upgrade to the designated maintenance point.

Medium P virus. It's not a smart phone. Go and give KF a subordinate, it's free. That's it. Almost all of the 5130's UU first recovery was like this.

Maybe there is a virus in the phone, try to boot it on.

My colleague's mobile phone is the same, the same problem. Can't you install the system yourself?