The system automatically shuts down and cannot run, what is the impact of the screensaver on the sys

The theme used by oneself is not saved.

It's okay, this thing is set up casually. The former is mainly for the protection of the display. Avoid unnecessary homework on the monitor, but it is more troublesome when watching movies and **. 20 minutes is recommended.

The latter is to save power,You just look at the settings yourself,Personally, I think the system is dormant and there is not much difference between automatic shutdown,The biggest power consumption is audio and video,It's best to turn off the audio and video when people are not there,This action is much easier than setting up an automatic shutdown。

Also, if the screen is protected it is better to set a password during the security period.

There is no impact, these settings need to depend on individual needs, there is no best, only the most suitable.

System hibernation is the process of storing programs running in memory and unsaved data on the hard disk as files, and then shutting them down. After waking up from hibernation, the system will first read the hibernation file, write the contents of the file to the system memory according to a specific algorithm, and re-run the process. It won't hurt.

This shutdown method is a normal shutdown method, which will not affect the computer, and the system program will be automatically closed before the automatic shutdown, and will not cause system problems.

It won't affect the computer, but one thing to note is that if you set it up to shut down, it will stop itself when you don't want to!!

It didn't have much of an impact. It is recommended to save the screen for 10 minutes, turn off the monitor for 20 minutes, and the system standby for 30 minutes or sleep for 30 minutes.

"Set the screensaver on your home computer for 2 minutes, and the system will automatically shut down after 3 minutes of sleep" This setting is not good and does not make any sense. In particular, "the system automatically shuts down after 3 minutes of hibernation", if you don't plan to watch it again, why not just turn it off? Hibernation only makes sense when you're ready to look at it again after a while.

It is recommended that you set both screensaver and hibernation for 7 minutes to 10 minutes.

I'm generally all items are never!

No, no matter how you set it, it won't affect your computer.

You set it up like that.

It's also good to save yourself from forgetting to shut down.

And make unnecessary waste.

The fan is broken, causing the UPU to overheat, and the computer will automatically shut down when you step on it, so it is recommended to change the fan.

Start the Control Panel Power. There is a configuration scheme for automatic shutdown inside.

Of course it does. It is also not ruled out that there is a problem with the hardware.

It doesn't matter if the patency is a problem with the hardware, the power supply, or the poor contact is possible.

There are many reasons for automatic shutdown.

Reason for automatic shutdown of the computer:

The computer system is poisoned or malware, the CPU fan is broken, the CPU temperature is too high, the temperature is overheated, the power supply is broken, or new hardware is added, the power supply is insufficient, the graphics card or graphics card fan is broken, the motherboard is broken, the motherboard core is overheated, etc., the computer will automatically shut down.

Auto Shutdown Troubleshooting Methods:

1. There may be a problem with the BIOS settings, enter the BIOS to restore the default settings or take out the battery of the motherboard, reverse the buckle discharge, and wait for 5 minutes to reverse install it. Purpose: To restore the default values of the BIOS settings and eliminate the automatic reboot or shutdown of the BIOS cooling presets.

2. If the computer shuts down automatically when using a certain application software, the automatic shutdown failure may be caused by this program software, and the program software can be uninstalled.

3. Then check the power supply, the power supply quality is poor, aging or the power is too small, which can not meet the power supply needs of the computer accessories, and the high-power and high-quality power supply can be replaced.

4. Then use the elimination method to check the memory, graphics card, CPU, CPU fan, motherboard, etc.

5. Check the memory, the memory quality is not up to standard, poor heat dissipation, overclocking, mixing and inserting of different brands of memory and the CAS value setting is too low, etc., which can cause the computer to shut down automatically, and the memory parameters can be adjusted accordingly in the BIOS.

6. Check the motherboard, the motherboard aging, capacitor failure or pulp, the motherboard power pins, the motherboard and the chassis backplane short circuit can cause automatic shutdown, you can take the motherboard out of the chassis to check or test, then check whether the CPU fan rotation and the CPU temperature is normal, and then check whether the bottom of the CPU fan heatsink is dry, if it is dry, clean the silicone on the CPU fan, and then recoat the good silicone. If the fan is not normal, replace the CPU fan.

7. Cleaning method: It is a method to eliminate faults by cleaning the dust of the parts in the computer host. Dust is one of the factors that can also cause computer automatic shutdown failures, dust can cause parts aging, pin oxidation, poor contact and short circuit and other failures.

For these faults caused by dust, it is generally more effective to use the cleaning method.

8. The power supply system is unstable, which can also cause the occurrence of automatic shutdown faults, and a UPS backup power supply with voltage stabilization function can be considered.

The system is broken, the system has been installed.

Change the system thank you, please professional.

Click the Esc key, and a menu of F1 and F2 will appear. Usually click F2 to power on!

You can put a system repair disc to try.

The boot file is corrupted.

1. Enter the PE system, and the hard disk management software repairs;

2. Reinstall the system.

System recovery programs, because of accidents that cause the computer to shut down, and reboot have this kind of protection program in order to recover system data.

Thunderbolt has the function of timing shutdown, plan shutdown in the lower left corner - add a scheduled task, and then set the shutdown time. As long as you don't turn off Thunderbolt, you can use it.