Apple 8P plug problem, can t be charged, can I change the plug?

Yes, try to change the charger again, if it still doesn't work, you have to consider whether the tail plug is broken.

1. If the non-original charger or charging cable is damaged, you can find an original iPhone charger and charging cable, or charge other iOS devices to see if the compatibility problem is caused by the non-original; 2. If the charger and charging cable can charge other devices, it is likely that your mobile phone data port or mobile phone hardware is faulty, and you can try to use wireless charging to charge if possible. 3. The aging of the cable will cause the mobile phone to not be able to recognize the accessories normally and cause it to be unable to charge, you can try to plug in the mobile phone with a different lightning interface, or try to force restart the iPhone before charging; 4. If there is a contact problem with the mobile phone interface, check whether the contact between the mobile phone interface and the power cord plug is poor, and check whether the interface at the bottom of the mobile phone is blocked by foreign objects; 5. If the gold finger of the lightning interface is black, it may be that the contact is poor due to water corrosion, and it is recommended to clean the mobile phone interface in time to avoid damage caused by liquid infiltration, and replace it with another data cable.

It is recommended to use the following methods to check the cause of ** and then solve it:

1. The voltage is not enough: it is recommended to change the socket, if it was originally plugged into the computer for charging, change it to the socket and plug it in.

2. The charger or data cable is not original: replace it with the original mobile phone data cable and the original charger and recharge.

3. Check whether the room temperature is too low: Apple has set up a low temperature protection for the iPhone battery, and sometimes the phone will not be able to charge if the temperature is too low, so as to prevent the deposition in the battery, resulting in a short circuit inside the battery.

4. The charging head has been used for a long time and is aging or the interface is dirty: change the charging head. Take a thin piece of metallographic sandpaper and cut it out to a suitable size, fold it in half a few times, and gently rub it in the interface a few times.

5. The charger or data cable is broken: It is recommended to change the data cable or charger.

6. Battery damage: If you still can't charge despite the above reasons, and suspect that the mobile phone battery is damaged, please go to the local after-sales point for testing.

The Apple 8 mobile phone charger has poor contact, which may be caused by the wear and tear of the charging cable connector, and it is enough to replace the charging cable.

Take a toothpick to scrape the charging port, don't be afraid, it won't be broken.