How to open the back cover of a Citizen watch, how to remove the Citizen watch chain

The back cover of the Citizen JY8100 watch can be removed according to the following three methods. A pry cover, this kind of back cover is pressed flat. It is usually used on business watches and other varieties, and the waterproof level is relatively low, and most of them are waterproof with 3 air pressure.

The back cover is usually open at 3 o'clock or 12 o'clock, and is left open at one of the 6 o'clock.

With a fast semi-wet towel, it's simple.

1. You need to prepare special tools, you need a meter adjuster, a rice bracket, a small hammer, if you don't have it, you can buy it online.

2. Fix the strap on the strap slot, find the direction of the arrow of the watch shaft, and align the direction of the arrow with the thimble of the gauge adjuster. If you can't find the arrow, you can observe the size of the holes on both sides of the lower strap and aim the small hole at the thimble of the strap adjuster.

3. Use a small hammer to beat, pay attention to the size of the force and the cooperation of the hand to avoid accidentally injuring the hand.

4. Be sure to carefully align the small hole on the bracelet, slowly turn the handle, and push out the steel needle in the bracelet. After the above operation, use pliers to directly remove the steel needle.

5. Turn the end of the bracelet removal tool with some force, so that the needle tip can break the connection in the bracelet. As you can see in the picture below, pull out that protrusion and the bracelet breaks.

If the back cover of your Citizen watch has fallen off and you need to reinstall it back, you can follow these steps:1Make sure that the gasket or O-ring on the back cover of the watch and the watch body are intact.

If the lossy chain is found to be broken or missing, it needs to be replaced. 2.Align the back cover of the watch with the position on the watch body and press gently so that it is in contact with the watch body and flat.

3.Using the watch back installation tool or a professional tool, tighten the watch back cover. Be careful not to be too tight or too loose so as not to affect the normal operation of the watch.

4.Gently pat or shake the watch gently to make sure the branch or watch back cover has been securely fitted back. The above is a general step shed to reinstall the back cover of the Citizen watch.

Summary. **Citizen watches have a fixed numbering rule, each watch has its own unique serial number, according to the number can query the specifications of the watch, the date of manufacture and the place of sale, depending on the model, the location of the serial number is also different. Counterfeit watches generally only use a uniform number, or even no number, even if the high imitation is engraved with a serial number, most of them only appear in a single position on the back cover of the watch.

**Citizen watches have a fixed numbering rule, each watch has its own unique serial number, according to the number can query the specifications of the watch, the date of manufacture and the place of sale, depending on the model, the serial number is also different. Counterfeit watches generally only use a uniform number on the code, or even no number, even if the high imitation is engraved with a serial number, most of them only appear in a single position on the back cover of the watch.

Dear, is there anything else.

<> is it in the glass or in the movement.

Ask for a custom message] Wait a minute. Ha.

A real Citizen watch will be marked with a citizen rotor in front of the Hui Zao movement, and the basic disturbance is a gold-plated movement, at least the rotor is gold-plated, and it also includes the movement of quartz watches. Anything identified with the Miyota alphabet is a fake Citizen watch.

Ask about custom messages].

Summary. Removing the upper bezel dial of a Citizen watch requires care and care, and the steps are as follows: Prepare the tool:

A small screwdriver and a soft cloth are required. Place the watch on a soft cloth to avoid scratches on the case. Use a small screwdriver to gently loosen the screws around the ring dial, being careful not to be too tight or too loose to avoid damaging the watch.

Removing the dial of the upper bezel of a Citizen watch requires care and the steps are as follows: Zhaoqin Preparation Tool: A small screwdriver and a soft cloth are required.

Place the watch on a soft cloth to avoid scratches on the case. Use a small screwdriver to gently loosen the screws around the dial of the ring, taking care not to be too tight or too loose to avoid damaging the watch.

I'm sorry I don't understand, but can you elaborate on that?

Detach the ring dial from the watch, gently pluck it with your fingers until it loosens, and then gently pick it up with your fingernails or a gadget. Place the ring dial on a clean cloth to clean it of dust and stains. After the old sun crack is cleaned, the ring dial can be installed on the hand closed watch again, and Kai is not fixed with screws.

It should be noted that if you are not familiar with the disassembly and repair of the watch, it is best to leave the watch to a professional repairer to deal with it so as not to damage the watch.