LAN website, how to build an internal website on LAN

You should use Server 2000 or Advanced Server to build a website.

If you are using XP Professional, you can also:

If you use XP to install IIS, insert the XP installation CD directly into the CD-ROM drive, then select Add Component in the "Add Removal Program" and select "Internet Information Service" (i.e. IIS). However, note that XP cannot be the Home version, it should be the Professional version (XP Professional Edition).

Reference: Full process** Set up web and FTP server based on XP-IIS setup**Note: XP is used as a web server, and only 10 threads of network access are provided for testing).

1. If you don't know how to write **source code,You can go to the Internet to find a movie**source code.。

2. Set up a streaming server

1.Find a WindowsXP installation disk. Put it in the optical drive.

Then click Control Panel - Add or Chaqing Delete Program - Add Delete Windows Component, put the tick in front of the IIS item, and enter its sub-item to check whether the Web site point item is selected, select it if it is not selected, and then click Next until it is completed.

2After installation, it is to configure the web site, you can find a lot of tutorials in this area on the Internet, you can search for it.

4. According to step 2, select the path to your storage ** and set ** home page.

5, someone else in the address bar to enter your IP can be opened**, if you want everyone to enter the LAN**, then you also need to build a DNS server, then you can enter a domain name to open** defeated.

3.Upload the finished **.

After logging in to nat123, enable port mappings and add mappings.

4.After the mapping is completed, ** will be built in the intranet (in fact, the external network can also be accessed in this way).

3. All peanut shells are mapped to the intranet.

The new version of Peanut Shell can not only achieve intranet penetration, get rid of the problem of unusability caused by no public IP and NAT**, but also support public network. No public IP address or router port mapping is required.

The second step is to set up the mapping on the software. Click on the default domain name in place to manage the new peanut shell.

The third step is to add a mapping.

Step 4: Click on the current host. Select the corresponding port mapping in the intranet, obtain the random port on the extranet, and click OK.

If it is an XP system, you need to install the IIS package, and it is limited by the number of connections and versions, after all, it is not as professional as the server version, so the access is unstable, and the connection is relatively troublesome.

Set your ** location and access port in IIS.

Enter the server IP on the client side, and you can access it directly.

Install the Windows Server server, add the network service component, you can build a website on the server, and browse on the client below!

Create an IIS on the internal network and then access it with a computer name or IP address.

3.Upload the finished **.

After logging in to nat123, enable port mappings and add mappings.

4.After the mapping is done, ** is set up on the intranet (in fact, the extranet can also be accessed in this way).

I took a look at it** and did it very creatively.

Host host.

The host has a total of 16 subnets, each with 16 addresses.

Push it yourself below. The first and last addresses of each network segment cannot be used, one is the network number and the other is the broadcast address. So there are only 14 addresses that can be used.

The network segment and subnet mask are all specified how to allocate them, are you sure the topic is correct?