How to use the cash register?

I own a clothing store, and the quality is good! I've been using it for more than two years, and there's no problem, and I don't need to change the ribbon, so it's a lot easier. I used to use a machine that always had to change the ink head, annoying!

Dude, this question is a bit difficult to answer you!

Because the service of dealers in each place is difficult to determine and evaluate! But I'll give you some advice!

For the electronic cash register, the after-sales and return to the maintenance are very bottom. It's just like the phone we use! If you really want to think about service, I hope you find a brand that is in front of your own door or right in people's areas!

Because the electronic cash register is generally caused by operational problems, if it is really bad, it will be returned to the factory!

**It's not very expensive, and now there are more brands, you go to a few more dealers, and look at a few more brands! Be careful!

Declare the service content to the dealer!

This problem is really not good, most of the current cash registers are thermal print heads, and there is rarely a need to use ink change heads. I also agree with the cash register to buy the brand, at least the service and after-sales can keep up. Mainly after-sales and local dealers have a lot to do with it.

Be sure to talk about after-sales service before purchasing, and let it explain how to use it in detail to facilitate future use. Think again about this brand of cash registers.

To be honest, it sucks, and the report is basically not aligned!!

OEM processing is always unbelievable. Or buy a better brand. It is better to have your own and the company that produces and sells.

I really hope it can help you, but there are some differences in how to use the cash register for each brand. The after-sales service of the cash register is very important, I will give you a general description according to the Sitong cash register:

1. First clear the machine, set it according to your needs, and if it is a catering, you can set the number of dining tables.

2. Use the key to tune to the programming file for the entry of the commodity department and single products, and make preliminary preparations for sales.

3. Now you can turn the key to the sales stall for sale.

I don't know if the above steps can help you, because the cash register is really not a sentence or two sentences can be understood, but the searcher sells the machine in the early stage, and the work behind it is very simple.

Use the administrator's key to hit the programming file, then press the conversion key, then press the cashier key, and then press the subtotal key to make the factory product settings. But I haven't operated your model. Generally the operation should be similar, you try.

The interface of the scanner must be 232 serial port, and then the port can only be used with the debugging manual provided with the gun.

Are you talking about the front or back office? I haven't done this machine, I don't know very well, you can add me to chat. I'll see if I can help you out.

Down with the programming files.

Function 2 + Clear After that, just subtotal.

Just add a serial port scanner. Laser 280 Infrared 180

There are really few people who know how to use the second-generation machine, so you can look for the manufacturer to read the manual or something.

Are you talking about the front or back office? I haven't done this machine, I don't know very well, you can add me to chat. The interface of the scanner must be 232 serial, and then I have to use the debugging manual that comes with the gun to set the port.

The collection software has a 6-digit barcode that should be consistent with the commodity code of Dahua. Then it's all set to by amount. In this way, the barcode will be recognized by scanning directly in the front desk of the software,**.

There is software and cable together too.

Reboot into safe mode, adjust the display to 640*480, reboot to normal mode and then turn back to 1024*860