brain blind if you have two laptops in a room to access the Internet 25

Updated on number 2024-05-22
26 answers
  1. Anonymous users2024-02-11

    First, install an ADSL, and China Telecom will give you an ADSL modem, and an account number and password.

    Second, buy a router, connect your ADSL to the router, and then use two network cables to connect from the router to the two computers.

    Third, set your account number and password to the router, let it automatically dial the number, and two computers can access the Internet.

    As mentioned upstairs, if both of your computers can use wireless, then buy a wireless router to connect the computer and the router without a network cable.

  2. Anonymous users2024-02-10

    The kind of router that requires wireless Internet access.

    The wireless function is turned on.

  3. Anonymous users2024-02-09

    Agree with yyrobin - lifting people on the fifth level, but this is one way.

    There is also a way to share the wireless network card, that is, use your computer to connect the cat with a wired dial, share the wireless to another computer, another computer through wireless and you to establish a sharing on it, search for related posts, there will be screenshots, can not be added**, this cost is the lowest, the performance is also very stable, the only point is that the computer as the host must open another computer to access the Internet.

  4. Anonymous users2024-02-08

    Why bother, a crossover cable is enough! Dial in with one person, then share the network!

    Share Network: Right-click on Network Neighbors - Properties - Broadband Connection - Properties - Advanced - Share (allow other users to connect to the network through this computer).

  5. Anonymous users2024-02-07

    1.With ADSL, the service provider will give you an ADSL modem, account number and password.

    2.Buy a router, connect your ADSL to the router, and connect it from the router to the two computers with two network cables.

    3.Set it up to the router and do it according to the manual, it's very simple, so that the two computers can access the Internet.

    4,.If both of your computers can use wireless, then buy a wireless router and you can connect the computer and router without a network cable.

  6. Anonymous users2024-02-06

    **Line|

    ADSL cats.

    WAN port) router (LAN port) (LAN port).

    Computer 1 Computer 2

    Settings:Open IE to input or now generally these 2 kinds are more - the username and password are generally admin (on the manual)--network settings WAN parameters enter the username and password into it OK。

    If you are afraid of the troublesome wire, you can change the route to a wireless one, and the settings are the same. It is also stated in the manual.

  7. Anonymous users2024-02-05

    yes. A wireless router will do the trick.

    Buy a TP-Link for four, about 120 or so.

    At that time, both computers will no longer need to be plugged into the network cable. The router needs to be configured. If you don't know how to configure it, read the manual. Or find me as well.

  8. Anonymous users2024-02-04

    Install a router and divide it into two routes. If not, ask me and I'll teach you in detail

  9. Anonymous users2024-02-03

    Install a router, which is cheaper for more than 30 yuan a router with specific installation steps on it.

  10. Anonymous users2024-02-02

    1,Use a wireless router,Because ordinary routers don't have a speed limiting function,Simply put, it's to limit the functions that occupy the network such as BT Thunder** movies,Change a router,TP Link's wireless router with speed limiting is less than 100rmb It's very cost-effective, I'll use it Model 740N The bedroom is very good to use No longer have to worry about someone getting off the network card。

  11. Anonymous users2024-02-01

    The most direct way is to bring a small switch, the room information port into the switch, and out of two network cables to connect the two computers. In this way, the degree of freedom is poor, and the range of activity is limited by the length of the network cable. Ideally, you need to have a wireless router, but you need to configure the router.

    The wireless settings of the router can be fixed, no matter what hotel you go to, you just need the hotel to provide a fixed IP that can be accessed by the external network, and you can configure it. As for configuring the router, you only need to set a static IP, then configure the SSID in the wireless network, and turn on wireless broadcasting. (There are two disadvantages of this method, one is that the hotel is willing to provide you with an intranet IP.)

    Of course, this is not a big problem. Because usually the hotel is DHCP way. Another is that you need to set the static IP of your router according to different hotels.

    Hope it helps.

  12. Anonymous users2024-01-31

    Bringing your own small router will do.

  13. Anonymous users2024-01-30

    If the computer has a wireless network card, you can use the computer's moneyless network card to send a wireless signal to another computer.

  14. Anonymous users2024-01-29

    1. The network cable is directly connected to the router.

    2. Set the IP of this book to, directly connect to the router and log in to the router, and set the corresponding user password for broadband.

    3. Set the IP of this book to automatically obtain, disconnect the network cable, switch the wifi connection wireless router, and restart it after OK.

  15. Anonymous users2024-01-28

    The username and password of the router are admin

    Go and set it up.

  16. Anonymous users2024-01-27

    Just go to Telecom and buy a wireless one, it's better than anything else.

  17. Anonymous users2024-01-26

    The wireless router is set to IP

    Set a login password for the wireless router

    Then, set the IP of the two machines and try to log in with the password.

  18. Anonymous users2024-01-25

    Hub routes can conflict.

  19. Anonymous users2024-01-24

    A computer is connected to the hotel's network cable

    Another computer is connected wirelessly

    Just set the password to an empty one.

  20. Anonymous users2024-01-23

    You can buy a router, it is best to buy a wireless router The cable provided is connected to the router WAN port, and then set to turn on wireless broadcasting, and then use the notebook settings to search for wireless network connections, search for direct connections, and use the same operation on the other one.

  21. Anonymous users2024-01-22

    There may be two reasons for this problem, the first may be a router problem, and the second is a problem with the machine, but his machine does not drop the connection, which means that it is more likely that your machine is a problem.

  22. Anonymous users2024-01-21

    There are many reasons for this because the signal strength is insufficient, both machine and man-made. There are more people using the public network of the hotel, and the situation is more complicated.

  23. Anonymous users2024-01-20

    Maybe your laptop's power management mode is wrong, right? Tick the "Allow this device to be turned off to save power" on the wireless card.

    In addition, the rental time of the IP address is longer.

  24. Anonymous users2024-01-19

    Maybe it's because the router of the hotel is not good.

  25. Anonymous users2024-01-18

    Bring your own hub or switch. The port on the hub or switch is divided into LAN and WAN, plug the hotel's network cable into the WAN port, and connect your own book to the LAN port. You need a switch or hub, and two network cables.

  26. Anonymous users2024-01-17

    Bringing a switch and 2 network cables will do.

Related questions
17 answers2024-05-22

You can't do this, although the current notebook supports three displays at the same time, but these three displays can only be achieved by independent displays in addition to the notebook itself. Your other two monitors are also connected to the laptop's main unit, and this signal can't pass through the other two laptops. >>>More

26 answers2024-05-22

It can be seen in the Start menu"Networking"Words.

You can also click Desktop-Personalization-Change Desktop Icon-Hook again"Networking"That's it. >>>More

4 answers2024-05-22

First of all, you have to make it clear what brand you like, and then what series, I personally suggest, now that China has joined the WTO for so many years, some digital products, as long as they are not very high-end, domestic and foreign are almost the same, after all, most of the foreign countries are still made in China, domestic brands such as Lenovo, Acer (Taiwan), Asus (Taiwan), Shenzhou, foreign such as HP, Dell, Samsung, Sony, Toshiba, now 4000 to 5000 price notebooks in addition to Shenzhou and very good configuration, Other brands are similar, and I personally don't recommend buying Samsung, so, Toshiba's, these are Japanese brands, and these brands have about 4000 to 5000 notebooks with similar workmanship to other flat shots, but the configuration is worse than other brands, so unless you want to buy high-end, you don't have to consider these brands. >>>More

19 answers2024-05-22

1. Check whether the switch of the wireless network is turned on, the wireless network switch of each brand is different, some are buttons, some are shortcut keys, but the position of the button and the shortcut key will be different, after confirming that the wireless network switch is open, check whether the router is turned on. >>>More

24 answers2024-05-22

Buy a thinkpad, the difference between this high-end and domestic price is the highest, and the tariff is worth buying in the United States, and he basically doesn't need to pay customs duties when he brings it back to you. It is best to buy above the mid-to-high-end.