How much does it cost to install a taxi meter and how to charge a taxi meter?

It depends on what machine you're going to use, not necessarily, at any price.

Taxi meters are one of a kindMeasuring instruments, which is used to measure the duration of the taxi and measure the mileage according to the signal transmitted by the mileage sensor, and calculate and display the fare payable by the passenger taxi based on the measured time and mileage.

Taxis are generally charged by the number of kilometres, but at the same time, the taxi meter also calculates the time spent traveling slowly, i.e. the waiting time, which is generally converted to 1 kilometre in 5 minutes**. So when the car stops at the traffic light, the number on the meter will keep rising.

All taxi meters are time-spaced, "hour" is time, and "distance" is metered. Hourly charges are charged when waiting for a red light or other reasons to stop, and when the speed is less than 12 kilometers per hour, the meter and the meter are charged. So we take the same route when we commute to and from work, and the ** typed by the meter will be different.

Summary. Hello dear, glad to answer for you. Taxi fares are as follows:

1. The starting fee is 3 kilometers and the starting fee is 13 yuan. 2. Mileage fee, when taking a taxi mileage of more than 3 kilometers, each kilometer is charged is yuan. 3. Low-speed waiting fee, when the taxi speed is less than 12 kilometers per hour, between 7 am and 9 am, the kilometer mileage fee needs to be charged every 4 minutes, and for other time periods, 1 kilometer mileage fee needs to be charged every 4 minutes.

Hello dear, glad to answer for you. The taxi fee is as follows: 1. The starting fee, the starting mileage is 3 kilometers, and the starting fee of macro fiber is 13 yuan.

2. Mileage fee, when the mileage of the taxi exceeds 3 kilometers, the charge per kilometer is as if it is yuan. 3. Low-speed waiting fee, when the taxi speed is less than 12 kilometers per hour, between 7 am and 9 am, the kilometer mileage fee needs to be charged every 4 minutes, and for other time periods, 1 kilometer mileage fee needs to be charged every 4 minutes.

Pro, taxis, cars for temporary hire are mostly charged by mileage or time. In Taiwan, it is called "taxi", Hunan, Guangdong, Hong Kong and Macao are called "taxis", Singapore and Malaysia are called "taxis", and in Shanghai it is called "difference head (cā dǒu)", and "taxi" is an abbreviation of "qi state taximeter", that is, "taxi" or "mileage meter".

Taxis are metered on a distance-based basis. Generally, it is the starting fare, kilometer fee, return empty driving fee, waiting fee, and night service fee. As for the specific standards, the regulations vary from place to place.

1. Starting price: Within 3 kilometers of a taxi, it is a unified **, that is, the starting price.

2. Kilometer fee: After exceeding 3 kilometers, it will be charged according to how much money per kilometer.

3. Return empty driving fee: When the taxi carries passengers over a certain distance or area, it is charged as a subsidy fee for empty driving on the return journey.

4. Waiting fee: According to the passenger's request to stop and wait or wait at the vehicle at 0 speed due to traffic congestion, red lights and other reasons during the journey, every 5 minutes of waiting will be charged as 1 km (excluding empty driving fee).

5. Night service fee: From 23 p.m. to 6 a.m. the next day, a certain night service fee will be charged.

Taxis are charged differently depending on the region.

For example, the billing method of taxis in Beijing: daytime:

The starting price is 10 yuan (within three kilometers), and the number of kilometers exceeding (including) three kilometers to fifteen kilometers will be charged at 2 yuan per kilometer. The number of kilometers beyond (including) 15 kilometers (50% empty driving fee per kilometer) will be charged at 3 yuan. Night:

The starting price is 11 yuan (within three kilometers), and other billing methods are the same as above.

The starting fare of a taxi in Guangzhou is 7 yuan, and the mileage is kilometers. After the kilometer, the rental price per kilometer is RMB. After more than 35 kilometers, the empty driving fee will be added, and it will rise to yuan per kilometer.

Other charges for taxis:

If you want to apply for a road passenger business driver's license, according to the provisions of Article 9 of the Regulations on the Administration of Road Transport Employees, the relevant regulations for commercial road passenger drivers, must be obtained from the first time. The corresponding driver's license can be applied for after three years. According to the road passenger driver's license application, it is necessary to bring your driver's license, ID card, and a qualified driving school for registration, as well as to attend training and exams.

A passenger driver's license can be issued within 20 days of passing the test.

1. Be sure to ask the price first when taking a taxi: because taxis sometimes do not charge according to the meter, so you must ask clearly whether the meter is metered, so that it will be safer and more convenient to take the car.

2. After getting on the car, pay attention to the name of the company and the taxi person in front of the co-pilot: because we may lose things or leave valuables in the car, we must look at a taxi nameplate in front of the co-pilot, with reports**, complaints**, driver's names, etc.

The general taxi meter has a sensor, which is connected to the gearbox of the car, and the wheel rotates once, and the speedbox also rotates once, which will give the sensor a pulse signal, and the meter relies on this pulse signal to calculate the mileage. The electronic sensor is directly connected to the electronic signal of the odometer.

When the speed is less than 12 kilometers per hour, or when waiting, it is considered to be waiting at a low speed, and it is charged by time, and every few minutes of waiting is counted as one kilometer (different in each city). There are also taxis are prepaid, such as the starting price of 7 yuan, the starting kilometer is 3 kilometers, the unit price beam, you get on the car driver a dozen meters is not to go to 7 yuan, walk 3 kilometers are 7 yuan, to 3 kilometers, first add the unit price and then go to the next mileage.

A taxi meter is a meter used to measure the duration of a taxi and measure the mileage according to the signal transmitted by the mileage sensor, and calculate and display the fare payable by the passenger based on the measured time and mileage.

1. Preparation before installation.

1) The car battery must be inspected before installing the meter.

Whether the electrical equipment and various lights are in good condition, check whether the odometer has indication and jitter, check whether the high-voltage point wires are in good condition, and the conditions can be installed.

2) According to the charging standard of the loaded taxi, adjust the charging mode of the taximeter, and the meter can only be used after passing the test by the local measurement department.

3) Adjust the k-value according to the model of the taxi being loaded.

Parameter. 4) Use the car battery to check whether the meter is working normally, and check whether the sensor is flexible. Check whether the empty license plate is flexible to flip, and the light of the empty license plate is not lit when it is overturned, and it is on when it is erected.

2. Installation. 1) Install the sensor.

Different models, the interface of the sensor is also different, can not be used indiscriminately, to install according to the manual. The general principle is: the sensor is installed in the odometer and gearbox.

It is better not to disconnect the flexible shaft and mount the sensor directly on the gearbox outlet. The flexible shaft should not have dead bends or S-shaped, its radian radius should be greater than 20cm, and the sensor should try to avoid the high-pressure point YC system, high temperature area and the location that is easy to enter water.

2) Install a meter.

The meter should be installed in a position that is convenient for the driver to operate and does not affect the driver's line of sight, avoids the exposure of the meter, and is convenient for passengers to observe.

3) Install an empty license plate.

In the appropriate position in front of the windshield, it is fixed with glue or self-tapping screws for easy turning.

4) The whole machine is connected.

Strictly follow the color provided in the manual or the sub and female plug connection.

Taxi fares are as follows: by mileage (check transaction price|Matching|Preferential policies): by yuan (check the transaction price|Matching|preferential policy) kilometer standard, the number of kilometers can be multiplied by yuan; Pricing by time:

According to the standard of yuan kilometer + waiting fee, the starting price is yuan, and the back yuan is yuan per minute, plus waiting fee yuan per kilometer.

How much does a taxi cost.

Taxi fares are as follows: according to the mileage (check the price of leather pants for friends|Matching|Preferential policies): by yuan (check the transaction price|Matching|preferential policy) kilometer standard, the number of kilometers can be multiplied by yuan; Pricing by time:

According to the standard of yuan kilometer + waiting fee, the starting price is yuan, and the back grip is a simple minute yuan, and the waiting fee is added per kilometer.

Extended information: Taxi, a car for temporary employment, mostly charged by mileage or hourly clearance, also called a taxi. It is called "taxi" in Taiwan, "taxis" in Hunan, Guangdong, Hong Kong and Macao, and "taxis" in Singapore and Malaysia.

The English "taxi" is the abbreviation of "taximeter", that is, the draft Hu is "taximeter" or "odometer".

The starting price is 6 yuan, and the yuan per kilometer is <>

The charging method of taxis varies from country to country, and the following are the basic ways of taxi charging in general: 1Starting Price:

The starting fare of a taxi refers to the basic fare that passengers pay when the taxi starts moving, which usually includes the mileage of the first few kilometers and the cost of the ride. The starting price can vary and vary from region to region. 2.

Mileage fee: The mileage fee for a taxi is calculated based on the distance travelled by the passenger, usually per kilometer. The mileage fee varies depending on the area and taxi company.

3.Time fee: Some taxi companies will charge a time fee to make up for the time cost when the vehicle is slow, stuck in traffic, etc.

4.Night-time charges: Night-time charges are usually slightly higher than day-time, i.e. there is a night-time mark-up, which usually varies by region.

5.Additional Charges: If the driver waits or exceeds the specified time, or if the passenger needs to book or request a taxi in advance, the taxi company may quietly charge an additional fee for the ride.

In general, taxi fares vary from region to region and from taxi company to taxi company, and passengers should check the local fare guidelines before boarding. <>