Freeze issue when watching PPLIVE on the computer

software, full scan).

2。The computer system has stubborn viruses and Trojan horses or worms interfere with, or the system files have been lost (360 system emergency.

Rescue box or Kingsoft first aid kit, Kingsoft net shield, etc., any of them, all the killing, and then repair).

4。There are new vulnerabilities waiting to be installed in the system (patched for high-risk and important, others are set to: ignore).

5。Installation of redundant similar software, (360 Butler, Software Uninstall, Find Uninstall, Again: Power Cleaning).

6。The graphics card or memory CPU is in poor contact and loose or has dust covered, (unplug the eraser).

7。The memory CPU is overheated, and the heat dissipation is not good! (Don't turn on for too long, turn off and dissipate).

8。If you still can't get in, it means that the system files are missing! Or maybe there's a serious error in the system memory!

9。Try to press F8 after booting, press Enter, Enter, enter into safe mode, configure correctly for the last time, and press down.

Try it! Or, go into safe mode, go to the desktop, and get a full antivirus!

10。Playing games on the blue screen, generally the system does not support this game! (Change the game version or change the XP system).

Reinstall or upgrade to the latest version).

12。If it still doesn't work, you need to "one-click restore" the system or "reinstall the system"!

Or there are other conflicting similar software installations and uninstallations! For example: antivirus duplication, browsers, games, input methods have the same kind of redundancy, uninstall the redundant, only one remains!

Don't use this to see, directly search for what you want to see, there are many more resources than PPS.

Memory problems, pull out the memory and plug it back in, if it doesn't work, you can repair the place where the computer is repaired, it should be a change of inner memory.

The main causes of hardware are:

1. Poor heat dissipation: If the display, power supply and CPU work for too long, it will cause a crash, dust and oil the fan.

Check the CPU temperature (go to BIOS or use CPU-Z), it should work around 35 to 60 degrees.

2. Dust killer: too much dust in the machine will also cause crash failure. Clean the chassis regularly.

3. Memory module failure: mainly due to loose memory module, the quality of the memory chip itself, the memory module contact fault should be eliminated according to the specific situation, if there is a problem with the quality of the memory module, the memory needs to be replaced to solve the problem.

4. Hard disk failure: If the remaining space of the hard disk is too little and there are too many fragments, the machine is easy to crash when it is running. It is necessary to develop a good habit of regularly organizing your hard drive and removing junk files from your hard drive.

If the hard disk is aging or due to improper use of bad sectors and bad sectors, it is necessary to use the tool software to troubleshoot, and if the damage is serious, the hard disk can only be replaced.

Other reasons 1, software and hardware incompatible: 3D software and some special software, may not be able to start or even install normally on some microcomputers, find and delete incompatible software and hardware.

2. Driver installation is incorrect: When some hardware, such as the driver of the graphics card, is installed incorrectly, it will suddenly crash with a blue screen or black screen when the system is booted into the desktop, check and delete the problematic driver.

3. Defects in application software: If you run this buggy software, the system may crash or not start normally, in this case, you should find the latest version of the software or simply uninstall it.

4. Virus infection: Viruses and Trojans can cause a sharp drop in computer work efficiency and cause frequent crashes. At this time, we need to use anti-virus software such as KV3000, Kingsoft Antivirus, Rising and so on to conduct a comprehensive investigation and anti-virus.

Before you check for viruses, make sure that your antivirus software has an up-to-date virus database. You can click on the "Upgrade" button to update it so that you can make sure that you can detect the latest viruses.