My computer was in arrears the day before yesterday, and then I couldn t access the Internet, and th

To see how many m it gives you, hit ** and ask it.

Dear, hello, I'm glad to answer your questions, there is no network at home in arrears, it may be because the background has not been successfully deducted, it is recommended that you restart the router and broadband at home, or wait patiently for about 2 hours, if it still doesn't work, it may be the following reasons: 1. If it is a problem with the broadband itself, first of all, Zao Minsong directly connects to the broadband network cable test, if it is a problem with Lu Zheng's broadband, contact broadband customer service to solve. 2. If it is a problem with the router, if it can be used and cannot be used for the time being, you can take it to cut off the power supply of the router and plug it in, and wait to see it.

The sudden loss of network on the computer is not necessarily due to arrears, but the computer is in arrears, the firewall defense is too high, the system is not properly set, the network cable is loose or the router is faulty. After the computer has no network, you can check the network cable and router, and then check the network connection status, and make appropriate adjustments according to different reasons, so that the network can be restored to the network state.

Broadband arrears will make the computer no network, the computer cannot connect to the network, you can contact the network operator for verification. If the computer is out of network due to arrears, you can connect to the network by restarting the computer after payment. If there is no arrears, you can check the antivirus software and the firewall of your computer, and if the firewall defense is too high, you can modify the firewall settings.

If the computer suddenly loses the network, it may also be caused by improper system settings or network interruption, you can open the network sharing center and check the status of the network connection. If you are not connected to the network, you can reconnect to the network. If the network shows that it is connected, you can use the ping command to check the remote host, test the network connectivity, and then check the service settings.

If the computer suddenly loses the network, you need to check the network cable and router equipment, the network cable is loose or the router is faulty, which will make the computer lose the network. If the network cable is loose, you can unplug the network cable, plug it back in, and the network will reconnect after a few minutes. If the router fails, you can contact the maintenance personnel for repair, or you can install a new router.

The computer is not connected to the Internet, check and solve the problem:

1. Check whether the indicator light of the router is normal. Check that the power cord is plugged in.

2. The computer shows that it is connected, but there is no network. First of all, consider whether the router is factory reset, just reset the settings. Enter the IP address of the router in the browser, and enter the username and password to set it up.

3. If you can't find out the reason, you can use the computer housekeeper to conduct automatic investigation, open the housekeeper, computer clinic, and abnormal Internet access.

Summary. I'm glad to be able to answer this question for you, there is no arrears of wireless at home, and suddenly the network is disconnected, in this case, you restart the router and the optical modem, because he sometimes has an unstable network cable, he will suddenly be disconnected, if you restart it or not, in this case, consider it, you can ask people near you, they don't have a network at home, in this case, consider the problem of the signal tower.

There is no arrears of wireless at home and the network is suddenly disconnected.

I'm glad to be able to answer this question for you, there is no arrears of wireless at home, and suddenly the network is disconnected, in this case, you restart the router and the optical modem, because he sometimes has an unstable network cable, he will suddenly be disconnected, if you restart it or not, in this case, consider it, you can ask people near you, they don't have a network at home, in this case, consider the problem of the signal tower.

Here you can ask the local operator, ask if the nearby is in the maintenance or what, in this case, you first have to think about it, that is, you have no network in your own home or your area, and then you have to make sure that there is no arrears of phone bills.

You can connect to the wireless network until an exclamation point appears indicating that you cannot access the Internet.

Dear, you turn it off for about ten minutes and then turn it back on, in this case, there should be a problem with the signal tower near you.

If it still doesn't work, what kind of problem is it?

Dear, if this situation still doesn't work, consider your connection port, you see if the connection port is loose, you here and then tighten it a little again, and then restart the router or not, you can ask the people near you, see if they have this network, if they don't have a network, in this case, it means that your signal is a problem, it means that it is a problem with the nearby signal tower, in this case you can only wait, or you can ask the local operator.

With a toothpick, find the small hole marked RESET on the router, plug it in, and the router will return to its factory state.

Plug the broadband network cable into the WAN interface of the router, connect the computer to the LAN interface of the router with the network cable, and set the router as follows:

1. Log in to your router (enter or log in in IE, enter the username and password, and the router label is there.) Usually admin).

2. Go to the "WAN" setting

A If your broadband requires an account password, set up PPPoE, fill in the account password, select Automatic connection as the connection mode, and confirm.

b If you don't need the account password, if you are given a fixed IP, please select a fixed IP address and fill in the correct address of the fixed IP address, mask, gateway, and DNS.

c If you don't need the account password and it is a dynamic IP address, please select a dynamic IP address and fill in the DNS address.

3. Go to the wireless settings, select WEP or WP2-PSK, set the wireless password, and remember this password.

4. Go to the "DHCP" settings and activate the DHCP server.

5. Connect the broadband network cable to the "WAN" port of the router.

6. Connect the computer to one of the "LAN" ports of the router.

7. The computer is set to automatically obtain IP address and DNS address.

Computers and mobile phones should be able to access the Internet.