What is the problem with the Volkswagen Lavida lighting failure light always on?

Updated on Car 2024-05-27
11 answers
  1. Anonymous users2024-02-11

    There should be a bulb to be broken, there is a voltage problem, you need to check carefully, all the bulbs, especially the lights that are on and on. [Extension]: 1. Screw the left light control switch forward for a small light, also known as the corridor light, which can be turned on when it is about to get dark, one can show the width of the car, and the other is to display the dashboard, which is easy to operate.

    2. Twist twice as a low beam, which is mainly used for night city driving. 3. Move the light control lever forward.

  2. Anonymous users2024-02-10

    A circle appears on the dashboard fault light, and there is an exclamation mark next to it, which may be the fault light of the car's braking system, and the reason for the light may be:

    1. The ABS function fails.

    2. The brake pads are seriously worn and have failed.

    3. The brake fluid does not meet the requirements.

    Abnormalities in the braking system are manifested in poor braking or malfunction, unilateral braking deviation, braking noise, brake drum heating caused by braking lag, and parking brake failure.

  3. Anonymous users2024-02-09

    Volkswagen Lavida The light bulb is faulty, and the light should be broken, or the light line is faulty, it is recommended to go to the store to check and solve it.

  4. Anonymous users2024-02-08

    A car generally consists of an engine, chassis, body, and electrical equipment. The engine is the power plant of the car; The role of the chassis is to support and install the automobile engine and its components; The body is mounted on the frame of the chassis and is used for the driver, passengers to ride or load cargo.

  5. Anonymous users2024-02-07

    It may be that there is a problem with the light circuit, you can check whether the light circuit has a short circuit.

  6. Anonymous users2024-02-06

    Summary. Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

    Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

    Hello, please socks crack ask where is the picture of the fault lamp? Has the vehicle been modified or not? If so, please describe in detail what changes have been made, and send the fault light diagram.

    If it hasn't been changed, it's a faulty light.

    Send the fault light diagram and fault code over.

    If there is no small screen, the lights of the whole car are determined to be ruined? Lavida common front headlights inside the small lamp failure, or license plate lamp failure, 519 recognizes that there is a bulb wrong, you don't have a lamp abnormality, you can only use the decoder to read the fault to see, otherwise I really don't know which bulb has an abnormal Shanzi.

    The computer reads that the steering wheel is abnormal, and the lights are normal.

    Send the fault code over, 09 read?

    I don't have a fault code, the repairman reads it.

    Ah, this .........I can't continue to help you answer the problem of annihilation, the instrument indicator light indicates that there is an abnormality in the lighting system, 519 recognizes, which trillion reform bureau needs to see the fault code.

  7. Anonymous users2024-02-05

    The following are the reasons why the fault light of the Volkswagen Lavida engine is on: 1. The engine oxygen sensor is abnormal: the engine oxygen sensor is generally placed near the intake manifold, which will cause the oxygen sensor to be displaced or damaged due to intense driving or some collisions, which will cause the sensor to be abnormal and cause the fault light alarm.

    2. Fuel injector blockage and intake valve carbon deposit: There are impurities in gasoline, which accumulate at the fuel injector, which will affect the fuel injection of the fuel injector, and the direct injection engine in the cylinder will directly lead to engine shutdown. The impurities will produce carbon deposits after combustion, and the accumulation of carbon on the throttle to a certain extent will affect the normal field switch of the throttle, affect the normal operation of the engine, and cause the alarm light to light up.

    3. ECU feedback error: generally known as "false fault phenomenon", it may be due to the loosening of the wiring of some sensors on the car or due to some operations of the personnel on the car to make the vehicle ECU issue a warning, in this case, only need to go to the 4S shop to let the maintenance personnel clear the fault code into the bridge clearance line.

  8. Anonymous users2024-02-04

    Volkswagen Lavida ( Check price |Detailed explanation of the model) The bulb is faulty, and the light is on? Auto Network: I'll answer for you.

    Volkswagen Lavida bulb fault light should be the bulb is broken, or the lamp circuit is faulty, go to the store to check and solve it, if it's okay, let them eliminate the fault lamp. Generally, the instrument cluster indicator light is not lit and will only light up when a fault occurs.

    During the opening of the ignition switch of the car, the indicator light will be on for a few seconds because the car computer has to self-test, and then it will be completely off. If you refer to the self-test process is not lit, it should be a broken circuit in the dashboard, and it is recommended to repair it immediately, otherwise the fault indication will be affected. Different cars have different gauges.

    However, the conventional instruments of general automobiles include speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging gauge, etc.

    Hyundai car dashboard has made a variety of indicators or warning lights, such as coolant level warning light, fuel level indicator, washer liquid level indicator, charging indicator, etc., so the car dashboard is a device that reflects the working conditions of various systems of the vehicle. Common ones are fuel indicators, cleaning fluid indicators, electronic throttle indicators, front and rear fog light indicators and alarm lights.

    General comment: The classic Langyi style is not much to say, the overall style is stable and introverted, the golden mean is very perfect, although the appearance can not meet the pursuit of personality of young people, but it turns out that such a calm style still has its market.

  9. Anonymous users2024-02-03

    Reasons for reference only: 1. The sensor is damaged, the contact is poor, or the signal is interrupted; 2. Poor engine maintenance; 3. The quality of fuel and oil is not good; 4. The combustion of the mixture is insufficient; 5. Spark plug failure, ignition coil failure; 6. The fuel pump is faulty and the oil circuit is blocked; 7. The air conditioner filter is blocked.

    The specific situation is analyzed as follows; 1. Sensor problems; The sensors mentioned here include water temperature, crankshaft position, air flow, intake air temperature, oxygen sensor, etc., when these sensors are damaged, poor contact or signal interruption, the ECU of the car can not accurately obtain the data of the engine, and at this time it will cause the engine to seep into the shed barrier light on. 2. Maintenance problems; Poor engine maintenance is the most common cause of engine failure to light up. We know that the vehicle has a certain maintenance cycle, if the owner does not maintain on time, coupled with bad driving habits, then it will increase the burden of engine operation, and finally can only remind you through the fault light to care about your car 3, oil quality problems; The oil quality mentioned here includes fuel and mold shouting is engine oil, we know that the fuel filled by the car is generally marked, and the engine oil is also semi-synthetic and fully synthetic, manufacturers generally recommend the owner to use which grade of fuel, which type of engine oil, if the owner does not add as required, it will cause wear and tear of the engine in the long run, and the fault light is not to blame.

    Poor combustion of the mixture; The failure of the spark plug, ignition coil, fuel pump, and oil circuit blockage of the engine will cause poor combustion of the engine mixture. Poor combustion of the mixture is caused by the problem of engine carbon deposition or knocking, and these will eventually be detected by the engine's oxygen sensor and reported to the ECU, which will naturally turn on the fault light to warn of the intake air intake problem; When the engine burns, it needs to take intake, and the air filter element is very important in this process, if the air filter element of the car is not clean, it will affect the air intake of the car if it is not cleaned regularly, and it is very likely to be blocked in the long run. pressurization issues; Intake booster lines and turbochargers can also cause engine failure lights to illuminate.

    The most common of these is turbocharger damage, and at the same time, the vehicle will also have oil leakage, large oil consumption, and power loss.

  10. Anonymous users2024-02-02

    There was a bulb-like bulb on the dashboard of the Lavida cong nuclear car, which was a bulb failure lamp.

    Failure of the headlights and failure of the turn signal are also very common faults. Usually these problems are caused by a burned out light bulb or a faulty electrical circuit. The lights are out of order, and it's very dangerous to drive at night.

    It is extremely dangerous to drive without the headlights of the sedan Zheng Nian, one is that you can't see the road clearly, and the other is that your goal is not eye-catching, which can't attract the attention of other vehicle drivers, and is prone to collision accidents.

  11. Anonymous users2024-02-01

    Volkswagen Lavida should distinguish which fault light is on, and different fault lights have different reasons.

    Electronic Stability Program Warning Light: This warning light illuminates when the EPB electronic parking brake system fails.

    Battery Charging Fault Light: When the start switch is set to ON, the indicator lights up; After the engine starts, the indicator light goes out; If it is still on, it is an indication that the vehicle charging system is faulty.

    Engine Coolant Stability Level Warning Light: When the start switch is set in the ON position, the warning light lights up for a few seconds and then turns off. When the engine coolant temperature is too high, the warning hall will be lit.

    Low Fuel Warning Light: This warning light will light up when the fuel level in the fuel tank is too low. When the tank is filled with fuel, the warning light goes out.

    Brake system failure: When the starter switch is switched on or the engine starts, the warning light illuminates for a few seconds and then turns off. If the warning light is continuously on, it means that the brake fluid level is too low and the vehicle's braking system should be checked immediately.

    Tire Pressure Monitoring Warning Light: When the start switch is set to ON, the warning light turns on for a few seconds and then turns off. If the system fails, the warning light will remain on. Please contact Geely Auto Service Station for repair as soon as possible.

    Airbag Failure Light: When the switch is on, the warning light turns on for a few seconds and then turns off. If the system fails, the warning light will remain on.

    Engine fault light: when the start switch is turned on, the warning light is lit; When the engine starts, the warning light goes out. When the vehicle is moving, the warning light illuminates, indicating a malfunction in the engine control system.

    Low oil pressure warning light: when the start switch is turned on, this warning light is lit; After the engine starts, the warning light goes out; When the vehicle is turned on, it indicates that the engine control system is malfunctioning.

    Millions of car purchase subsidies.

Related questions
6 answers2024-05-27

If the ESC indicator is green, it is normal and anti-slip. If the ESC indicator is yellow, the electronic stability control system is malfunctioning. >>>More

10 answers2024-05-27

Oil leakage may be the relationship between the oil products, the imported car uses domestic oil for a long time because it is not suitable for the domestic inferior oil may turn on the light, or it may be the oil road, and the specific must be further determined by computer. >>>More

8 answers2024-05-27

The engine failure light is on means that the engine of the car has failed. The fault light only indicates that there is an abnormality in a certain system, as for the specific fault, it also needs to be interpreted with the help of a computer detector, and each brand of car has its own unique fault**. >>>More

18 answers2024-05-27

The fault light is lit to indicate that the engine system is faulty, but the specific component problem needs to be detected using a diagnostic instrument to determine. Common faults of classic Focus include inlet control solenoid valve failure, EGR valve failure, ignition system failure, discharge system failure, etc., please go to the repair shop as soon as possible to check and repair.

6 answers2024-05-27

EPC indicators are more common in Volkswagen cars. When the key door is opened, the vehicle starts self-checking, and the EPC indicator lights up for a few seconds before turning off. If the vehicle does not turn off after starting, it means that the vehicle's mechanical and electronic systems are malfunctioning. >>>More