How do I choose a watch?

1. Quality. 2. Brand.

3、**。4. Popularity.

You can learn about a watch based on these, and I also learned about these on Bao Jia Brontosaurus, you can go and see it.

Inspect the exterior parts of the watch.

The exterior of the watch can be inspected from the case, glass, dial, and hour, minute, and second hands. The case should be free of sand holes and obvious scratches, with symmetrical edges and corners; The screwing place between the back cover and the upper shell should be tight; The distance between the two rings and the case is equal, and the hole for installing the earrings should be centered at the rear of the case foot, and the depth of the hole should be appropriate so that the ring is not easy to fall off; The watch glass should be free of defects and scratches, transparent and bright; The three needles are installed correctly, and there should be correct safety clearances between the needles and the needles, the glass and the dial; The dial and hands are plated with a good finish, no marks, and the dial scale lines or luminous dots are complete; The approximate gap between the handle and the case.

Check the sensitivity of your watch.

The sensitivity of a watch refers to the flexibility with which its balance wheel automatically swings. The way to check is as:

1.Gently shake the watch that has not been wound and has stopped moving, and observe the movement of the second hand with the help of the power of shaking: if the second hand stops moving in a short time, it means that the watch can be fully wound (that is, the clockwork is not current), and the sensitivity is high; If the second hand continues to move for a long time, it means that the watch cannot be fully wound (i.e., the clock also stores torque), the sensitivity is not high, or the watch is faulty.

2.Slowly turn the handle of a watch that has not been wound to stop moving, and observe the start of the second hand: the less the upper handle, the earlier the second hand starts, the higher the sensitivity of the watch; Otherwise, the sensitivity is low or there are other faults in the meter.

However, it should be noted that due to the stiffness of the hairspring, the fast swing watch has to be a little more wound than the traditional frequency (18,000 times per hour) to swing. A watch with high sensitivity will continue to move for a long time after a full wind.

Check the spacing and position of the watch hands.

A certain distance should be maintained between the watch hands and the watch glass, the dial and the three hands, otherwise they will collide with each other and affect the normal operation of the watch machine. During the examination, it can be observed by dialing the needle. The method of checking whether the position and coordination of the hour and minute hands are normal is as follows:

Move the minute and hour hands to 3 o'clock and 9 o'clock and observe whether the two hands are at right angles; Dial to 6 o'clock, whether the two needles are in a straight line; Dial to 12 o'clock, whether the two needles coincide.

Precautions. When choosing a watch, you must choose according to the thickness of your wrist, and people with thin wrists should not bring too large watches.

For a long time, many friends have been asking, how to choose a watch? Different people have different opinions. Let me discuss this with you.

1. Choose the one you like. This sentence sounds a bit redundant, because according to common sense, everyone will choose their favorite when buying a watch, but this is not the case. For example, if your budget is 10,000 yuan, but your favorite table is not the highest in this budget, what will you choose at this time?

Don't hesitate to give up what you like and choose the one with the highest configuration. After all, in everyday life, the functionality of the watch is not as important as you think. As an accessory that you wear out to various occasions every day, it's more decorative.

In this case, of course, you should choose a watch that you really like. Even if you hesitate again and again to buy that high-end watch, the more you look at it at home, the more you don't like it, and the more you look at it, the more you feel that you have a pimple in your heart, that is, you are not satisfied with spending money to buy it. So, buy a table, a favorite table and a table with a higher configuration on a budget, and of course choose the former!

If what you like happens to be high-spec, choose the high-spec one directly.

2. Look at the details. A good watch, even if the logo is removed, the exquisite details and workmanship can show its value. The movement of a mechanical watch is a great arena for the details.

Even in today's highly automated world, those tiny moving parts still need to be polished one by one by a watchmaker. The degree of polishing of the parts can show the grade of a watch. Only if the brand positioning is sufficient to support a sufficiently high price will there be a rounded and elegant chamfer on the moving parts.

The details can also be seen from the appearance of the watch. The most common surface finish for a case is a full-body polished or all-over matte. Sometimes, in order to achieve a better visual effect, different surface treatments are applied to different parts of the case.

While this adds to the difficulty and cost, it's this uncompromising detail that gives the watch its higher value.

3. Be sure to buy waterproof watches, including second-hand watches. The case must be sealed. Some watches with thin cases are usually pressed with the back cover.

If the seal is not tight, even foreign objects such as dust and fibers can get into the watch and need to be repaired frequently in the future. If you don't buy a gold-plated or two-color case strap, the gold plating layer of the watch will definitely not be thick, at most no more than 10 microns, generally between 3-5 microns, which is very easy to be worn off; If it is ion titanium plating, I am afraid that the color is incorrect. If it is a watch with a steel case and steel band, it is better to choose a solid strap.

The opening and closing of the metal buckle is related to the comfort and safety of the strap, and it is also the most error-prone position of the watch in the future. Then, it's a good idea to have a larger handle for ease of operation.

You can choose according to the brand, quality, style, and function of the watch, because these aspects are important for a watch, and they can also reflect the quality of a watch, so we can choose a watch according to these aspects.

This needs to be determined according to the amount of funds, the funds are more sufficient, you can choose some more collectible watches, different genders, the selection of styles is also different.

To choose one with a more fashionable appearance, it is best to choose one with three needles. Pay attention to the surface of the watch, there must be no scratches, and there must be no quality problems.

1. Skill 1 for choosing a watch: the origin is very important, and the quality is guaranteed. In the watch industry, origin is almost a more important thing than brand.

The best place to produce is undoubtedly Switzerland, but France, Germany, Italy, and Japan are also quite good watch producers, but each has its own characteristics. For example, Japanese watches have been brilliant with quartz watches, German watches are more practical, and the problem of domestic mechanical watches is whether they are accurate or not, but domestic watches are also in continuous progress, and everyone still maintains a supportive and optimistic attitude.

2. Skill 2 for choosing a watch: when you can't decide, focus on the movement. If you're hesitating about how to choose a few models, look no further than the movement.

The core component of the watch, whether the time is accurate or not depends on the movement, and the quality of the movement may be the most important. If a watch advertises how good our movement is all day long, it is estimated that it will still stay at the level of "running accurately", but no matter how accurate it is, there will be no electronic watch standard. The way to choose the movement of a mechanical watch is to choose a well-known movement from a famous watch factory, the movement is important, but you should also choose a watch with a good appearance, because after all, the movement is still on the back and will not be exposed casually.

3. Skill 3 for choosing a watch: The material is also the last word, which is closely related to wearing and using. The material determines the **, and the ** of gold-plated watches and diamond-encrusted watches are naturally much higher, and now many brands of watches also like to use new materials for watchmaking.

Hublot is the first Swiss watch brand to combine precious metals and natural rubber as raw materials.