The screen can t be swiped after iPhone8P is unlocked, what should I do if I force restart it many t

You can reinstall Toutiao customer service, or log out and log back in when you get stuck.

iPhone: These are all relatively common failures. It's just that all of a sudden the screen fails and you can't click on the screen.

This is generally how this is done.

1. I have fallen, or I have fallen not long ago, the screen touch screen has been loosened, and after a period of time, the wiring will fall off directly.

Second, if it has been flooded, it can be used again when it is dry, as if it is fine. In fact, the motherboard must be cleaned, otherwise the circuit will rust and there will be problems after a period of time.

3. High imitation charger and charging cable. Many people give off the bag when they buy it, and when they get it back, it is a high imitation, and after using it for a while, it hurts the power supply. Directly scrap the phone, especially the Hong Kong version of the mobile phone.

Fourth, charging while playing with your phone will also hurt your phone. Sometimes the current is too high and burns the inner screen.

Is there any way to fix this, check it, if the line is loose, change the line. If the inner screen is broken, directly replace the screen assembly.

If you change the screen, it is not good, it is the touch screen IC problem of the motherboard, the so-called touch screen IC is a chip that controls the touch screen, which can be replaced, but the process requirements are very high, this is a chip-level maintenance, and the general small shop will not. Only contact the after-sales center for repairs.

iPhone suddenly can't slide to unlock, first you have to make sure that the reboot is to shut down and press the home button together until the white apple lets go.

The reason why the iPhone can't slide to unlock is that the phone turns on the blind mode, that is, it turns on VoiceOver. The solution is to swipe the screen, push up with 3 fingers, click twice to select settings, and then general, push up, to accessibility functions, there is a voiceove inside, turn it off.

If you can't, send it to an Apple after-sales store for repair.

Paying attention to these aspects can reduce the occurrence of this situation

1. Do not put your mobile phone in your trouser pocket, put it in your jacket pocket or use your mobile phone case.

2. If you have to put your trouser pocket, don't have the screen facing inward, because the screen is easy to rub inward and generate static electricity.

First of all, you have to make sure that the reboot is shut down and the home button is pressed together, until the white apple lets go, and secondly, you confirm whether the voiceover is activated, if the voiceover is enabled, you click on the swipe position, and then double-click the position to unlock, if so, you can ask me or continue to inquire about the follow-up related operations.

If it doesn't work, then you can only flash the machine or send it to the after-sales service.

Is it possible, did the reset try? Press and hold the power off button in the upper right corner and the home button at the bottom at the same time. The phone will restart after the black screen. Then give it a try.

If that doesn't work, you may need to do a factory reset. To connect the computer iTunes does. However, if the data has not been backed up before, the data will be lost.

Also, make sure that your phone has not been jailbroken, sometimes this will happen.

The way to flash the machine, get iTunes on the computer, plug in the iPhone, open iTunes, wait for him to read out your iPhone, and then click Restore, he will ask you if you want to restore the production settings, click Yes. It's OK, and then it will appear that you are contacting customer service, extracting the software, and restoring your iPhone. Just wait for him to start the machine after playing, and then the flashing will be completed.

Just press and hold the power button and home button at the same time for 10 seconds to force a restart.

Flash the machine and solve the problem immediately!

If there is not much power left, turn off and restart it a few more times to consume power. Drain all the power and try recharging it after a while. If the power is still quite a lot, and you are particularly anxious, find another mobile phone to call Apple support, if you can** solve the best.

If not, just ask a genius. I've encountered a similar situation before, that is, I ran out of power, and I recharged it after a while, and it was fine.

Hello, my phone also has the same problem, how can you solve it?

Ask a question: Is there no swiping on the phone?

Is there any other way to ask.

Question: So if the forced shutdown doesn't respond, can you only flash the phone?

For example, yes.

Under the premise that the battery level of the mobile phone is normal, the first.

Press and hold the home button while holding down the switch.

Don't let go of the keys and hold for about 10 seconds.

At this time, see if it can be turned on normally, if.

Still can't boot normally, then this problem, you.

You can also go to a mobile phone repair shop and try brushing.

The solution is to see if it can be turned on normally.

If it is said that this operation still does not work, then in this case, it may be the motherboard circuit.

It is possible that the wood failure is, well, the system temporarily failed and restarted to recover. You can cancel it.,If it's really not good, check this screen.,The other ones press the button to see if there's a response.,If the screen is broken, it's not responding.。 Ah, these excluded words.

Then it may be a system failure, then it is a restore, from the factory settings under the reset.

Regarding the above phone8p mobile phone screen failure problem, first check the display component to see if there is a crack, bump problem, if there is a display group.

Item. In this regard, if the display component is replaced, the fault is still not eliminated, then it is necessary to focus on checking the power supply part, in the phone mobile phone, a part of the voltage is generated by the touch control chip, for this problem, excluding the power supply problem, it is necessary to focus on checking the work strip pants of the touch control chip, such as the clock, the reset signal is also the key inspection part of the touch failure.

Answer1、If the screen turns off normally and does not respond, if the phone does not have any reaction, you can try to force the shutdown and restart the phone,First press the Apple 8P mobile phone volume plus button,Then press and hold the Apple 8P mobile phone power button for about 10 seconds,The mobile phone will automatically force shutdown and restart。

2. If the system is faulty or the system software is incompatible, you can try to erase all the content and settings by restoring the factory settings of the Apple 8 mobile phone.

3. Or try to update the mobile phone system, and by removing the software that is not compatible with the system, the problem can generally be solved.

4. If the screen often does not work, try flashing the phone to solve it.

Is it possible to use touch controls?

Asking questions is not allowed.

The question screen is streaked.

Ask how to brush.

Question: I don't have an iPhone store here.

Ask: Why is this happening?

The main reasons for the screen failure of the Apple phone:

First, the voltage is unstable.

Unstable voltage can also cause the screen to malfunction. When the transmission voltage is unstable, the capacitive screen will "drift" or even fail. Check the remaining charge of the battery and try to charge it when the battery level is below 20%.

Second, the problem of screen arrangement.

This problem is very serious, and it needs to be inspected and repaired in time.

3. The battery is damaged.

Battery damage is a direct cause of the failure of the screen of the Apple phone, and the battery needs to be replaced when encountering this situation.

iPhone screen failure, you can try to force shutdown first, long press [Power Button + Volume + - Decrease] until it shuts down.

Please click Enter a description.

After restarting, if you want to consider whether the version is too low, then you need to open the settings, find [General] and click to enter **Description.

Then click Software Update

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

If there is an update message in the system, it will be updated automatically. And it must be charged and connected to a Wi-Fi network to complete the update.

Please click Enter a description.

You turn off and restart to see, the phenomenon that the touch screen doesn't work is okay, if not, go to the Apple phone store and ask.

Apple to the mobile phone screen failure can not move, usually because of the failure of the mobile phone hardware or system failure, you can first use the iCloud cloud service to erase the phone to restore the phone to factory settings, if the phone after the factory reset screen failure can not be solved, you can go to the Apple after-sales center to detect whether the hardware of the mobile phone is faulty.

The steps to factory reset an iPhone with iCloud are as follows:

2. Log in to your phone's iCloud account.

3. After logging in, click "Find My iPhone".

4. Then click "Erase iPhone".

5. The webpage pops up prompting "Erase this iPhone", click the "Erase" option.

6. Finally, enter the password of iCloud, and the phone will be automatically factory reset.

The iPhone screen does not move for the following reasons:

The touch cable is loose.

The screen touch is broken.

Here's how to solve it:

It is recommended that you go back to restart the phone first, if the phone screen still fails after the answer, it is recommended that you go to the local Apple after-sales maintenance outlet to repair it.

Here's how to force restart:

Continue to press and hold the lock screen button for 5 seconds, and the shutdown screen will appear.

Because the screen is out of order, you can't turn it off even if you swipe your finger.

Keep holding down the home button with your other hand.

Press and hold both keys at the same time, and wait until the small apple appears on the screen to indicate that the reboot is successful.

After the phone restarts, the phone screen can be restored.

The mobile phone has a situation where the touch screen is not sensitive and malfunctioning

Recommendations:1Check whether the phone has a film, and if there is a suggestion, cancel the return to the screen film and try it.

It should be recommended to do it because the system is unstable.

After the backup, re-flash the dao of the machine, or reply back every time the touch screen is not sensitive. If there is no response, it is finally determined that the hardware is broken and can be sent for repair.

It is also possible that the touch screen failure is caused by excessive dust on the screen, it is recommended to find a cloth to wipe the spectacle lens to clear your iPhone screen.

Sometimes the touch screen does not work and it is related to your iOS system, please upgrade your iOS system to the latest version. After upgrading to the latest version of iOS, the touch screen function can also be restored.

2. If the self-treatment is invalid, it is recommended to immediately hand over the equipment to a professional for maintenance.

1. If there is a problem with the system, the copy mute key will fail, contact the after-sales service to deal with it in the DU store.

2. In addition, the failure of the mute button of the mobile phone, the open circuit of the internal DAO part or the failure of the motherboard chip may cause the mute key to fail, which needs to be solved by contacting Apple's official after-sales service for maintenance.

3. Contact the after-sales center (0755-23945679 Room 1301, Vanke Fuchun Oriental Building) for free inspection and maintenance.

1. The mobile phone is dropped.

has been, bumped, or the phone has been used for many years. may cause damage to the phone cable. It is recommended to send it to a mobile phone store or after-sales maintenance to replace it with a new mobile phone cable.

2. It may be due to water or bumps that cause the screen in the mobile phone to be broken. It is recommended to send it to a mobile phone store or after-sales repair to replace it with a new screen in the phone.

3. There may be a problem with the current system firmware of the Apple phone. It is recommended to redo the system firmware of the mobile phone, or update and upgrade the new version of the system.

4. It is recommended to bring the equipment to the 12th floor of Block B, Haidian Culture and Art Building, Haidian District, Haidian District (Beijing Apple Customer Service Center 010 5363 0616) for maintenance and processing, and the service fee will be waived for online appointment.

The mobile phone has a situation where the touch screen is not sensitive and malfunctions, it is recommended:

1.Check if your phone has a film.

If there is any, it is recommended to try after removing the screen film.

2.If the hand is touched.