Does the AP wireless network need a receiving device?

With the AP installed, the receiving device is your wireless network card. It generally doesn't matter who you use it, it mainly depends on how much bandwidth you have. If it's 2m, it can only be used by 1-3 people, and it will be very stuck.

How much is the approximate cost of a general AP unit. How many people can use it? Does it affect the speed of the Internet between users Supplement:

Supplement: We use dormitories. A 2m wire.

I want to buy a hardware solution. What is the right thing to buy? Added:

After evenly distributing, at least it doesn't affect me. Satisfactory answer: Haoge popular 8 level 2009-03-09 installed AP,The receiving device is your wireless network card。 It generally doesn't matter who you use it, it mainly depends on how much bandwidth you have.

What model? The accessors are all bidirectional, and they can be sent and received.

How to connect the AP to the router to set the reception:

The Mini Wireless Router is selected by AP mode:

Connection method] 1. Wireless routers --- miniature wireless routers.

2. DHCP of the wireless router needs to be turned on.

3. The wireless device can be connected to the wireless wifi of the mini wireless router to access the Internet.

You can buy a wireless router with WDS function to connect to your home, use the wireless bridging method, connect to the neighbor's wireless router, and then provide wired and wireless Internet access such as computers or mobile phones at home. You don't have to pull a network cable from your neighbor's house to connect the router, of course, if you can pull the network cable, the speed is faster and more stable.

Nowadays, most home routers can already support the bridging function, the question is whether your neighbor allows you to access, you need to know the other party's setting parameters.

Just go the other way. Change 3 different settings: the LAN of the main router A is connected to the WLAN port of B, and the DCHP of router B is on. LAN IP changed to 10The LAN IP of Router A of Router 2 is.

When generally used, you can use a wireless router AP probably due to the front you already have a router, right? If your home is not using ADSL and wireless router to set up routes with AP capabilities. If there are two ways to get the network cable to your home through someone else's route or to the LAN where the home network cable was originally located, you can try to use the cell I introduced below

Here, I introduce myself to using these two methods to have:

1. Connect the computer to any wireless router with the first line of the network cable, set the router, enter the wireless routing parameters to the 4 LAN ports, the wireless router has been turned on and set the password. If the network cable to your home is routed through the front, then the front, if you are a normal router gateway: then set the LAN port wireless router while the group is on the network

Come from somewhere else, then pull the cable and plug the cable into any of the four LAN portals on any of your home's wireless router (the WAN port is not available), so you will receive the wireless password on the client to access the Internet, and if you enter it in IE to your wireless router, if it enters the route in IE browser before entering. 。

2. Set your wireless router to a static IP, for example, set the WLN port of your wireless router to a static IP: set, and set the LAN port gateway of the wireless router of the gateway to:So that your wireless network ...