-
Experiment with the MAC address cloning feature in the router. Clone the MAC address of the network card you are bound to in the router. Connect to the network through your router settings dial-up.
If the effect is still the same, the router is a big brand, you can go to the official ** to search for the updated firmware of the corresponding model, there is a special version of the router firmware for some restrictions, but some areas may not be able to log in after updating the firmware. It is recommended to ** the normal version of the firmware in advance, and you can replace it back when needed.
-
Now the time limit is really distressing, if multiple computers, or unlimited routing, usually mobile phones also play, all go time, multiple accumulation, but I tell you a good way, I am also telecom, recently asked the internal data clerk how to do it with the router go straight for a time, do not accumulate time、、、 from the main line down to a limited router W port, and then re-router L port out of a line to the W port of the wireless router, This method is a route to route Telecom background monitoring equipment can not recognize, To be exact, I can't identify the technology so far, there is a line by the setting of you will definitely , I will not say much about the setting of infinite routing, you will know it at once, to ensure that you only take the time of one computer, if you drive 20m, then 10 computers should not be a problem.
-
I've never heard of this restriction.
-
ADSL time limit is the PPPoE account time limit, which is the time when your account is logged in.
-
Telco will know that you have the route installed, but the timer will not be counted as 2 hours. As long as your router has network access, it will be timed, so whether you use your mobile phone or computer to surf the Internet, it must be counted within the Internet time.
-
Theoretically, it can be detected, but they don't care, time with a name called Broadband King or what can monitor their own real-time traffic.
-
Telecom optical fiber is limited to 744 hours (2 years), which is equal to 24 hours per day, with a maximum of 31 days per month, and 24 * 31 = 744, that is, 744 hours of non-stop Internet access per month.
If the package ends (the broadband service expires), you can renew the service to maintain network communication.
-
24 hours a day, up to 31 days a month, get 24 * 31 = 744, that is to say, 744 hours of non-stop Internet access every month, no matter how you use it, you won't use it much. Broadband is a package product, only counting your line will not count how many devices you connect to this line and how much traffic you use!
-
As long as the router dials the number, it will start to charge by the hour, regardless of whether you are using a computer to surf the Internet or not, it will be calculated by the hour, no matter how many computers you have, it is counted as one. As long as you don't exceed the set of LAN limits, there will be no bandwidth timeout!
-
1 All hello is generally not exceeded, 31 days * 24 hours is exactly 744 hours.
-
Telecom time-limited broadband is a time limit on the use of the Internet during the monthly subscription period.
744 hours means that only 744 hours of broadband network can be used per month, from the successful start of dial-up network to the end of port network connection, the cumulative time does not exceed 744 hours, if exceeded, it will be billed separately.
And time-limited broadband, you can use it casually, without limiting the use time.
-
The billing method is roughly as follows: the sum of the number of dial-ups and the duration of dial-ups; Do you understand? Here's an example:
The two computers dialed up for one hour each, and the calculation was two hours; Dial-up by router, no matter how many computers are connected; Only the time of the router is counted, even if all the computers are not turned on, the router will be counted as time all the time; ok?
-
It must be an hour, your router just splits your network in two, but it may be slower.
-
Theoretically, it is.
Nowadays, many operators use such a strategy to restrict users from sharing the Internet, and if you don't crack it, you will definitely find that you have more than one device to access the Internet, deducting many times the Internet time.
ps: Don't ask how to crack it, the method is different depending on the region. It's up to you.
-
744 hours is exactly a month.
If you dial up with a route, there are no two IPs, so it shouldn't exceed the timer.
Telecom broadband is limited to 300 hours per month, and if it is used up, money will be deducted if it continues to be used, and whether the specific deduction depends on whether the user's quota is used up in the current year. >>>More
support. According to your description, you first need to judge the situation when the broadband connection is dropped, and according to different appearances, you can really find the real cause of the disconnection. The following is a targeted solution according to various disconnection phenomena: >>>More
Dear Telecom users, Hello! According to your description, according to the five service commitments of China Telecom Tianyi Broadband, the installation and relocation of the machine will be completed within 48 hours from the acceptance time in the area with wired broadband resources (the installation and relocation of the machine will be completed within 15 days in the area without wired broadband resources, and the temporary replacement of wireless broadband will be used if it cannot be completed). If the compensation is doubled for the overtime due to human reasons, the compensation standard: >>>More
Using the information provided by Company W for the preparation of the June balance sheet: >>>More
Xeon E3-1230 V2 around 1400.
A very cost-effective server processor, i5**, i7 performance, 22nm, 69 watts ultra-low power consumption. >>>More