Frequent drops, fires, frequent drops problem

Your home is telecom broadband,. If you drop the line, you can also play, which means that your home** line is normal, and the following is an analysis of the reasons for your situation.

1. It may be that there is a possibility of a virus in your second computer, but it is unlikely.

2. The crystal head of the main network cable on your cat (the most likely) is not done well, resulting in a drop in the line and a drop in the line, and the network cable on the router is not done well, which will also lead to a drop in the line.

3. If you have a problem with the server of the telecommunications bureau, you can directly dial the telecommunication service**.

However, there is a way to rule out that your cause is telecommunications or that you have not done a good job. You can get a good network cable,。 It must be a good network cable that has passed the detection.

Use this network cable to connect a computer directly to your cat, use the password of the telecom to dial the Internet, and only use this computer to try to see if you can access the Internet. As normally stated, there is no problem with the telecom network, the problem is the connection between your own cat and the router. If the number is dialed directly, the connection is still dropped, then the problem must be on the side of the telecommunications bureau.

Hope it helps you and good luck.

Since it's at home, it shouldn't be an ARP attack. If you are not using the dialing software that comes with window, please use the dialing software that comes with it

Otherwise, it may be the reason for the following.

1. Your cat, i.e. adsl modem, has dust and does not dissipate heat well. Overheating of the cat can cause frequent drops and even crashes.

2. The working voltage is unstable, which will make the ADSL modem automatically restart.

3. The route is broken, you use the computer to connect directly with the cat to see if it is disconnected.

4. There are many people who use the Internet during peak periods. You can try a different server.

6. See if your broadband connection shows disconnected when you drop the connection. If not, it may be a virus, try to kill the virus. If it doesn't work, just reload and see.

7. If the network cable is broken, try to connect it with a different network cable.

That's probably the reason for finding out in yourself. If it still doesn't work, go and call the telecom people. Good luck.

1) If it is a problem with the broadband itself, first directly connect the broadband network cable to test, if it is a broadband problem, contact the broadband customer service to solve it.

2) If it's a problem with the router, such as teasing the fruit that can be used originally, it can't be used for the time being, my own practice is to disconnect the power of the router and plug it in, and I'll take a look. In there is a factory reset settings, from the new strict according to the manual settings can be used, I don't understand, it is not recommended to set up at will (this is under the premise of the correct physical connection, sometimes the router is slow or failed to find the IP address, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3) If you turn off the wireless switch, turn it on, if the mountain Luzi is connected to the wireless with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, it is caused by the network card driver is not or is not suitable, and whether there is a problem with the network cable interface or network cable.

4) If it is caused by a system problem, it is recommended to restore the system or reinstall it.

The wifi old hail scatter state is a steady stream of drop-off digging.

Our original computer is also old and disconnected, but the set-top box does not fall, and now I have made a new broadband connection, do you want to try?

You first confirm whether the wifi signal connected to the route will be disconnected, or whether the wiring from the 1 2 3 interface of the router to the computer will also be disconnected.

1.If you are only connected to the wifi Internet connection, you can adjust the wireless channel of the router interface, and the setting method is as follows:

Log in to the interface of the router, click on the menu "Advanced Settings" - "Wireless Settings" - "Wireless Basic Settings", here, you can change the wireless signal name (SSID) of the router by the way, such as it can be changed to Tenda11, etc., "Wireless Network Mode" is changed to "11B G Mixed Mode" and "Channel" Selection, these three channels, less interference, more stable, click "OK" after setting, and then click on the menu "System Tools" - "Restart the router", and the data can be saved successfully after restarting.

2.If even the wireless or wiring is late and the network is disconnected, you can open the browser to enter, click "Advanced Settings" - WAN rate control, choose 10m half-duplex for broadband below 4m, select 10m full-duplex for 4-10m, select 100m half-duplex for 10m-20m, select 100m full-duplex for 20-100m, and click OK. Click on System Tools - Restart Router.

Also, if it is a wireless signal connected to the lead, look at how far away from the router, the wireless coverage of the normal router is about 100 square meters, and the distance is too far and the connection will be dropped. If you change the above parameters or the connection is still dropped, you can leave a message with the model of the router and the current software version number.

How to view the software version:

First open the browser and click on Advanced Settings - System Tools - Software Upgrade to see the current software version.