What makes a really smooth toilet?

Precautions for toilet purchase: 1. When choosing a toilet, the color should be consistent with the overall tone of the washbasin and bathroom. In addition, the pit distance must be measured accurately, and the error cannot exceed 1 cm, otherwise it will not be installed.

The styles and colors of toilets on the market are very diverse, and the variety of patterns, reliefs and strange shapes of toilets makes people feel dazzled, so you must know the general style and color of your bathroom before choosing a toilet. In terms of color, the color of the toilet bowl should be consistent with that of the bathtub and washbasin, and it should not be deeper than the floor tiles, and the color tone should be better coordinated with the wall tiles. 2. Pay special attention to the toilet without glazing and contacts in the water tank, if the glazing can only explain 3 problems.

1.Low Temperature Ceramic Bargain 2Ceramics have a high water absorption rate of 3

Cover the ugliness, cover the cracks. 3. The choice of glaze is very critical, it must be easy to wipe, give everyone a trick, you will know that it is good or bad, use the key to scratch the glaze, wipe it with a cloth to see if it can be wiped off. Ballpoint pens can also be used, and the glaze can be wiped off without toothpaste or laundry detergent for toilet cleaners.

4. In terms of flushing method, the toilets on the market can be divided into two types: siphon type and open flush type (i.e., straight flush type), but at present, they are mainly siphon type. The siphon toilet has a siphon effect while flushing, which can quickly drain away the dirt. The diameter of the flush toilet sewer pipe is large, and the larger filth is easy to flush down.

I hope my answer can help you.

It's really good, it brings us a lot of convenience, and I really give it a thumbs up.

The product is bright enough, the technology is strong enough

The new product is good, I really want to experience it.

It's really not simple, I'm very tempted how to break it.

Technology is so high ... Terrible.

It's definitely beyond our imagination.

Great product, how to develop it.

Be sure to look at the ceramic glaze on the inner wall of the toilet. When choosing, you can observe the surface of the product from multiple angles under strong light, so that there are no appearance defects such as dirty spot ripples and orange glaze, and it is better to feel smooth and delicate and flat. The glaze is directly related to the quality of the product, and the smooth glaze is not only strong in stain resistance, more conducive to cleaning, but also has stronger antibacterial properties.

In addition, the water absorption rate is also an important basis for its worst condition. Some low-end toilets have a very high water absorption rate, and the water is sucked into the ceramic, which will produce expansion, which is easy to make the glaze crack due to expansion, and the dirt and odor in the water will also be inhaled into the ceramic, and it will be difficult to remove the odor after a long time.

Is it so amazing? It's better to wash more.

Toilet buying tips.

1. Weight. The heavier the toilet, the better, the weight of an ordinary toilet is about 50 catties, and a good toilet is about 100 catties. The density of the toilet bowl with large weight is high, and the quality is relatively passable. A simple way to test the weight of a toilet bowl: Pick up the lid of the cistern with both hands and weigh it.

Toilet buying tips.

Second, the water outlet.

It is best to have one drain hole at the bottom of the toilet, and now many brands have 2-3 drain holes (according to different calibers), but the more drain holes, the more it affects the punch. The water outlet of the bathroom is divided into lower drainage and horizontal drainage, and the distance between the center of the drain and the wall behind the water tank should be measured, and the toilet of the same model should be bought to "sit at the opposite distance, otherwise the toilet can not be installed." The outlet of the horizontal drain toilet should be equal to the height of the horizontal drain, preferably slightly higher, in order to ensure that the sewage is smooth, and the 30 cm toilet is the middle and lower drainage

20 to 25 cm for the rear drain toilet; The distance between 40 cm and more is the front flush toilet. If there is a slight error in the model, the water will not be smooth.

3. Glaze. Pay attention to the glaze of the toilet, the glaze of the toilet bowl should be smooth and smooth without blistering, and the color should be saturated. After inspecting the glaze of the outer surface, you should also touch the sewer of the toilet, if it is rough, it is easy to cause sagging in the future.

Fourth, caliber. Large-diameter sewage pipes and glazed inner surfaces are not easy to hang dirty, and the sewage discharge is rapid and powerful, effectively preventing blockage. Test method, put the whole hand into the toilet mouth, generally can have a palm capacity is optimal.

5. Water tank. Flush toilet storage tank leakage in addition to obvious dripping sound can be determined, generally not easy to find, a simple inspection method is to drip blue ink in the toilet tank, stir well to see if there is blue water flowing out of the toilet outlet, if there is a leak in the toilet. As a reminder, it is better to choose a higher height for the tank, so that the impulse is good. (Note:.)

A flush volume of less than 6 litres can be classified as a water-saving toilet. )

6. Water pieces. The water parts directly determine the service life of the toilet. The quality of water parts of brand toilets and ordinary toilets is very different, because almost every family has experienced the pain of water in the water tank, so when choosing a toilet, you must not ignore the water parts, and the identification method is to listen to the sound of the button to make a crisp sound is the best.

7. Flushing. From a practical point of view, the toilet bowl should first have the basic function of flushing thoroughly. Therefore, the flushing method is very important, and the toilet flush is straight flush, rotary siphon, vortex siphon, and jet siphon. Pay attention to the different drainage methods:

The toilet pressing method can be divided into "flush down type", "siphon flush type" and "siphon whirlpool type". The water injection of the flush type and the siphon flush type is about 6 liters, and the sewage discharge capacity is strong, but the sound is loud when flushing; The whirlpool type uses a lot of water at a time, but it has a good mute effect. Consumers may wish to try the direct flush siphon toilet in Minxiang Market, which has the advantages of both direct flushing and siphoning, which can not only quickly flush dirt, but also play a role in saving water. Reference.

I think it's better to clean it with a special disinfectant.

It is very convenient to use Mr. Vermeer to achieve a smooth and translucent effect.

I recently used a Bass disinfectant very strongly, and the stains for many years are clear, and the results of other ones have not been very good before.

I think it's better to use something professional, like Mr. Wittmann.

Bath sanitizer is the best, it will be very bright, it has a strong decontamination ability, and the effect is very good.

Special detergents can be used to achieve such an effect.

If a lot of things are available, so many cleaning products can be used.

Cleaning with a special toilet cleaner is sufficient.