How to maintain an electric scooter, pay attention to those shopping networks in daily use

Daily cleaning. 1.Before cleaning, make sure the e-scooter is powered off, the charging port dust plug is tightly closed, and the battery cover is closed.

2. Use a wet towel or brush to clean the dust of the fuselage, and then dry it with a dry towel, and it is forbidden to use a high-pressure water gun to rinse, 3Avoid using corrosive solutions to clean the body to prevent corrosion of the surface of the body.

Battery care. 1.Warning: Do not ride at full speed after the battery is too low to prolong battery life.

2.If you do not use it for a long time, you can charge the battery regularly (1 to 3 months) to about 80% or unplug the power cord to save it. Battery damage caused by long-term storage is not covered by the warranty.

3.The battery will be affected by the low temperature when used in cold temperatures, but will return to its normal level of battery life after the temperature rises. (Usually used at 0C, the battery life will be reduced by about 30% compared to normal temperatures).

4.Do not expose to the sun.

5.Do not leave it in the trunk of the car exposed to the sun for a long time.

6.Please do not leave the battery pack at will, it may damage the battery pack due to water or drop impact, resulting in unusability.

Brake maintenance. 1.Check the brakes regularly, and if the braking distance is too long, tighten the screws on the brake line clockwise.

2.Please replace the brake pads or brake discs in time.

3.To replace the brake pads or brake discs, please find a local professional maintenance master to operate.

4.It is forbidden to apply lubricating oil to brake discs and brake discs.

Tire maintenance. 1.It is not easy to overpressure tires in summer.

2.A lower tire pressure will have better shock absorption, but it will lead to a lower range

The focus of maintenance is that the battery should be charged and discharged frequently, but it cannot be overcharged or completely discharged, and the rest is to prevent water or metal dust from entering the line. The frame is generally metal, nothing to maintain, and it is okay not to fall and weigh heavy objects for a long time.

Electric scooters? Generally, the load is so large, which basically refers to the limit.

Changing to a higher limit requires various modifications. If the shelf can't stand it, change it. If the motor power is not enough, change it. If the controller is not powerful enough, change. If the battery output power is not enough, change. Buy something better, it's more expensive to change it.

How to maintain an electric scooter and what to pay attention to in daily use.

1. Develop the habit of charging at any time, so that the battery is always kept in a fully charged state.

2. Determine the charging time according to the electric scooter trip, control it at 4-12 hours, and do not charge for a long time.

3. If the battery is placed for a long time, it needs to be fully charged first, and then replenished once a month.

4. Use pedals to help when starting and going uphill and against the wind.

5. When charging, use a matching charger, place it in a cool and ventilated place, avoid high temperature and humidity, and do not let water enter the charger to prevent electric shock accidents.

6. Avoid water flowing into the charging socket of the car body and avoid short circuit in the body line. In addition, avoid flushing the motor with water to prevent water ingress into the motor, which may cause the motor of the electric vehicle to malfunction. After washing, place in a ventilated place.

7. Prevent sun exposure. The environment with too high temperature will increase the internal pressure of the battery and cause the battery to lose water, which will cause the battery activity to decline and accelerate the aging of the plates.

The skateboard is not a very precise thing, and the parts have to be replaced once every 2 years at most, so there is basically no need for maintenance, and I will give you a few suggestions and misunderstandings that novices are easier to walk into.

First of all, like entering the water, falling and smashing when landing are inevitable, you can only try to pay attention to and reduce, of course, when you do the action, don't want to hit the ground and don't smash the board, you buy a skateboard is not a collectible.

Many people think that bearings should be cleaned regularly or lubricated, which is very incorrect, because if you add oil (no matter what oil), it is difficult to clean off, so that you will be involved in dust and sludge in the process of ordinary play, you feel dirty and clean, clean up and dirty after refueling, this is a dead cycle. So you don't need to maintain the bearings.

There is nothing to maintain on the surface of the board, if the sandpaper is a problem, can the life of your sandpaper be higher than that of the board? If you prefer to be clean, you can also clean the sandpaper, and at the same time, it should be noted that when you use something to clean the sandpaper (such as a brush, toothbrush, etc.), you will grind the sandpaper off, in short, if you don't have a cleanliness habit (if you have it, don't play with the board as soon as possible), it is recommended not to clean the sandpaper.

Many people think that the bridge does not need to be maintained, but there is one thing that needs to be paid attention to on the bridge, and that is the threads at both ends (where the upper wheels are). Ordinary hardware stores or screws such places have sold nuts, ranging from 1 cent to 5 cents, LZ must be changed frequently, so that you can better protect the bridge end thread, because if you use a nut for a long time, with the failure of each action will hit the nut, and at the same time will damage the bridge end thread, the only way is to change the nut often, about what extent to change it, if you see that the nut has obvious deformation when you have to change, otherwise you can't take off the wheel after slippery, If the thread at the end of the bridge is damaged, then it can only be threaded or the entire bridge is replaced, which is very troublesome.

Wheels, there's nothing to say, just ignore him. In addition, it doesn't matter that the wheels can be washed (without bearings).

It's all my own experience in playing the board for a few years, and I type it word by word, and I hope LZ will adopt it.

It is easy to solve, apply special grease to eliminate abnormal noise, refreshing and smooth.

The scooters such as Good Baby Paper are made of special grease and grease for roller skates from Hotolube or Kruber, which are colorless and odorless, waterproof and durable, and have food-grade safety certification. Taobao comes in a 130g toothpaste-like package for easy use.

Ordinary butter and motor oil should not be used, as the durability and waterproofness are poor, and there will be an unhealthy odor.

Be careful not to get into water, the frost on the board surface should be cleaned with a brush, and the screws on the board should always be tightened.

That's all, just go and play.

Avoid water, avoid collision, do not brake at the end of the board, and the sole should be clean

Just put it in a ventilated place.

Now there are more and more people using electric scooters, and it is inevitable that they will encounter dirty and other conditions in daily use, when we encounter these problems, it will definitely be difficult, whether the electric scooter can be cleaned with water, and I am afraid that I will accidentally wash which part. Of course, everyone wants to wash their car cleanly, look comfortable, and ride comfortably. Next, I specially consulted the electric scooter manufacturers and asked how to clean the electric scooter.

Many people like to rinse electric scooters with water guns, and the damage to electric scooters is very great in doing so. Some electric scooter motor side covers are not well sealed, and when encountering the high pressure of the water gun, water will enter the motor from the gap in the side cover. Although the display screen of the electric scooter is sealed, even if the high-pressure water can not enter, and the water vapor can still enter, if the car is washed in summer, the temperature of the water gun flushing is low when washing the car, and the sun is exposed after the car is washed, in which the temperature difference is large, it is easy to produce water vapor inside the display, and after a long time, the battery will shorten the life, and other electronic components will also be damaged.

Therefore, cleaning the electric scooter with a water gun requires certain skills, because the electric scooter is charged and does not burn gasoline, which will cause electricity leakage if you are not careful.

So, what is the right way to wash a car?

Take a basin of water, wash the car with a rag dipped in water, it will not produce high pressure, brush the corners with an old toothbrush, such as the inside of the rear shock absorber and caliper, clean with water, do not expose to the sun after washing, you should use a dry cloth to wipe the metal parts (iron part) dry, do not dry naturally, it will be easy to rust, especially the screws. After washing your car in the summer, place it in a cool place so that the electric scooter display does not get moisture.

1. Board surface: 1) Try to avoid letting your board fall into the water and get wet, otherwise it will become soft and collapse and the elasticity will be greatly reduced.

2) There is no need to wipe the skateboard with a damp cloth often, and the skateboard is so clean that it does not help to practice the moves.

3) The board will naturally wear out after a long time, and when your board tail no longer has a crisp "click" sound when you hit the ground, you may consider changing the board.

2. Sandpaper: Sandpaper should also be kept away from water sources! Otherwise, the sandpaper will fall off the sand, and the friction will be gone.

If you're in a place where the dust is so heavy that the sandpaper is covered in dust, you can try stomping on the skateboard a few times, or slamming the sandpaper down on the ground and slamming the skateboard on the ground to get half of the dust off. Many people like to draw on sandpaper or cut sandpaper into various shapes to highlight their attitude, but remember not to go too far, otherwise the friction surface silver socks will reduce the loss of money.

3. Wheels: Wheels will get smaller and smaller and discolored with your regular use, and they will also wear out because the ground is too rough, which is normal. When one of your wheels is smoothed out, smooths up, or falls off, it's time for a new wheel.

Electric scooters mainly look at the battery and tires, and the maintenance of the battery is very necessary. Usually it doesn't take long for our mobile phones, televisions, and other appliances to break easily, let alone electric scooters. If you haven't used the car for a long time, you should check it once a month and charge it.

If it is not charged in time, it may cause the battery to overheat and eventually damage. You should also be careful not to expose the car to the sun, in the rain or in a humid environment, if the battery gets wet, it will be dead. There are three possible problems with pneumatic tires.

One is a flat tire. Puncture is not caused by internal and external wear, but due to the internal air pressure is too high, so the air pressure can not be too high when the tire is inflated, especially when the temperature difference is large, such as high temperature and cold weather, the second is a puncture, that is, piercing the inner tube when riding, which is where the bad road surface or glass slag must be paid attention to when riding. The third is air leakage, which is when the air pressure inside and outside the tire is insufficient, and air leakage occurs, so it must be inflated during the trip.

If you are afraid of scratching your body, you can put on some stickers, spray paint, wax, etc. Car washes are possible, but done smartly. After all, electric scooters have batteries and circuit boards, so don't charge them while cleaning, turn off the power or remove the battery, don't let water touch the battery circuit board, etc.

It is best to wash and wipe the body with a towel wring water. In addition to avoiding frequent car washes, too frequent will accelerate the aging of car paint, I hope the above can help you.

In normal times, the electric scooter must be maintained, especially the wheels to prevent it from running out of oil.

Usually don't ride in the water and dust, and open in the garbage heap. Conventional wiping, the most important thing is to charge in time, lithium battery low voltage starvation is irretrievable, the battery cell can only be scrapped, especially placed without use, at least once every three months, half a year of riding discharge to low power and then fully charged (do not ride, discharge with a load such as a kettle, and then recharge).