What are the parts of a skateboard What are the parts of a scooter?

The slide board is mainly composed of a board surface, sandpaper, bracket, PU, wheels, bridge end nuts, bridge nails, cushions, bearings, etc.

1. a board surface. Including the head of the board, the tail of the board, and the socket of the foot. The decks are the obvious component surfaces that play an important role in the skateboard, and each deck is made of several layers of wood chips.

2. Sandpaper. 1 sheet, glued to the upper surface of the board to increase friction with the sole of the shoe and facilitate the control of the skateboard.

3. a bracket. It is fitted with wheels and is the most durable part of a skateboard.

4. Wheels. It's a part of the skateboard that isn't taken seriously, but the wheels determine how it feels when you slide.

5. a bearing. There are 8 of them, and each wheel is equipped with 2 precision bearings. Bearings are available in different precision and durability.

6. PU is a polymer material.

7. a cushion.

It is the cushion of the industrial logistics loading and unloading platform.

8. a bridge end nut.

It is a nut, a part that is screwed together with a bolt or screw to play a fastening role.

9. a bridge nail. Nails on the bracket.

Deck deck, sand grip tape

Truck Truck, Cushion, Truck Neels

Bearings bearings (8 wheels).

The scooter generally consists of the following parts:

1.Skateboard: Usually made of wood or metal, it is the skeleton and foundation of the entire scooter.

2.Wheelset: Composed of wheels, bearings, axles and nuts and other components, with lead differential to support the scooter and generate power.

3.Handle bar: It is generally a folding handle made of aluminum or Shenla steel, and the scooter is controlled by the handle bar.

4.Brake: There are two forms of foot brake and hand brake, which are used to slow down and stop.

5.Base: Usually made of plastic or aluminum, it is placed on the skateboard to provide a stable footrest position.

6.Other accessories: such as brackets, lights, fenders, gloves, etc.

Together, these parts make up a complete scooter.

The breakdown is as follows.

1. a double rocker

The double rocker is a skateboard that is often seen in ordinary days, and it is used by many people. The double rocker is the foundation of the double rocker and is very effective for both technical and stability exercises.

For novices, it is better to find the center of gravity and persevere in balancing the situation. If the ground condition is not good, you can take into account the use of shock absorber wheels, the speed of the double rocker is very fast, and the operating flexibility and reliability are relatively good.

For novices, it is better to find the center of gravity and persevere in balancing the situation. If the ground condition is not good, you can take into account the use of shock absorber wheels, the speed of the double rocker is very fast, and the operating flexibility and reliability are relatively good.

2. Small fish plate

The small fish board has a relatively small surface, so it is difficult to slide and it is difficult to find the center of gravity. When sliding, the difficulty coefficient of the small fish board is higher than that of other leadership teams, and it is not suitable for novice applications. The advantage of the small fish plate depends on the relatively small volume of the small fish plate, which is only about half of the double rocker, and the weight is lighter than that of the belt.

3. a highway board

The road board is a type of longboard that is larger in length and width compared to several other types of skateboard. The reliability and speed of the road board are very high, and they are suitable for long-distance driving on the street. However, its disadvantages are very large and heavy, lack of operational flexibility and inconvenient to carry.

4. a finger board

The finger board is mainly a small skateboard for leisure and entertainment, and it is mainly a cultural entertainment for indoor play. Finger boards can help skateboarders experience how to skateboard and practice a variety of difficult movements in their rooms when the weather is not good.

Although the finger skateboard is a good item to play with, its equipment is the same as the real double rocker, and it is a good product for the double rocker enthusiast's ** sliding posture.

The composition of skateboarding is mainly divided into three parts:

1. a board surface. and sandpaper: Rows of Hungry modern skateboards are made of seven layers plus maple.

Pressurized, which makes the skateboard stronger and more durable, plus the bottom of the board pattern, pasted with frosted paper limbs, a piece of board surface is combined. Generally, there are warped parts on the head, tail and screw position of the board surface, and the role of warping is mainly to make us have a better performance when we do some jumping actions.

2. Bracket (also known as skateboard bridge) and shock absorber: this is an important part of the skateboard, the bridge is made of special aluminum alloy, the skateboard bridge is the core part of the connecting plate surface and the wheel, and the bottom of the middle bottom of the bridge is equipped with a special shock absorber for the skateboard, which is made of high fiber and silicone, which acts to protect the loss of the sliding gear leakage plate and play a role in balancing and buffering.

3. Pulleys and bearings: the manufacture of pulleys is made of urethane as the main material, which acts on the slide; The bearing plays the role of helping the pulley to slide, and the pulley and bearing are multiplied by each other and are indispensable.

Project History. In the 60s of the 19th century, California, USA.

Residents invented the first skateboard.

In 1962, skateboarders invented the second generation of skateboards.

After the 1970s, with the rapid development of science and technology, skateboarding.

Hobbyists have developed polyurethane materials.

of wheels, this wheel is flexible.

Strong, wear-resistant and resilient, it has greatly promoted the new development of skateboarding technology, and skateboarding has developed in the direction of socialization.

In the 70s and 80s of the 20th century, the United States first established the National Skateboarding Association (NSA), and the United States began to organize national skateboarding competitions.

In 1978, at the National Skateboarding Championships, the young man won the championship. So American skateboard manufacturer George Peralta used Powell Peralta as his skateboard trademark to market his skateboarding and promote the development of skateboarding.

The skateboard is mainly composed of 6 accessories: the board body, the wheel frame (bridge), the wheel, the sandpaper, the screws, the bearing (pei ring) The skateboard is subdivided into the following sizes:

1. Normal skateboard: 28-30 inches.

2. Long skateboard: 33-38 inches (long board).

3. Small skateboard: 22 inches (commonly known as fish board (small fish board) for young people).

4. Fancy skateboard: standard 31 inch (also known as technical board, double warped).

Skateboarding began in California in the 1950s. The earliest skateboards were made from skates (attached to a board). Skateboarding is popular because of surfing:

In fact, skateboarding was originally called "sidewalk surfing." Originally, skateboards were made by hand from individuals with wooden planks and planks. With the popularity of the sport, the company began producing skateboards in 1959.

In post-war America, society was carefree, and children usually played in the streets. [5] The board of directors is constantly evolving as the company strives to make the board lighter, stronger, and improve performance.

Skateboarding is a very personal activity. The sport of skateboarding is constantly evolving. Since 2000, skateboarding has become mainstream due to the focus on skateboarding games, children's skateboarding, and commercialization, among others.

With more and more interest and money poured into skateboarding, more and more skate parks and better skateboarding have emerged.

In addition, the continued interest has prompted skateboarding companies to keep innovating and inventing new things. Skateboarding will be featured for the first time at the 2020 Summer Olympics.

Basic skateboarding movements.

1. Dust sliding: the front foot is placed between one-half of the front section of the board body, the back foot is stepped on the ground to advance, and the body center of gravity is placed in front, then the skateboard can slide forward.

2. Turning: There are two ways to turn. The first is to retract the foot that supports the ground and place it at the tail of the board, apply pressure to make the front end of the board slightly cocked, and then use the body's waist force to rotate at an appropriate angle to turn.

This method is only suitable for when the skateboard is not that fast. The second method is the most common and the most convenient.

When gliding, tilt your weight slightly in the direction that your body is facing, or in the direction that your back is facing, so that you can also achieve the effect of turning.

3. Stop: Stretch the ground with the foot and rub the ground with the shoe to stop. Jump straight off the board in case of an emergency.

The composition and composition of the skateboard The composition of the skateboard is mainly divided into three parts.

Skateboarding is one of the roller skating sports, which is a technical sport in which athletes step on the sliding equipment and complete a variety of complex sliding, jumping, spinning and tumbling and other difficult movements on different terrains, ground and specific facilities.

Format: Finals, each of the 10 players gets three rounds. Each rubber picker who completes the first round will receive a score for the first round.

Each player who completes the second round will receive a score for the second round. Each player who completes the third round will receive a score for the third round. The higher of each player's first round score, second round match score, and third round score will be designated as that player's final score.

Players will be ranked 1st to 10th in the scoring table based on their final scores.

Competition process: In the finals, the starting order will be determined according to the results of the contestants. Competitors will start the race in reverse order of achievement (the 10th ranked player will start first, followed by the 9th ranked player, and so on, with the highest qualified player participating in the final round).

In the starting order, all 10 players will play the first round of imitation rushing, followed by a five-minute warm-up period, after which all 10 players will play the second round.

Skateboards are classified as follows:

1. Double rocker: The double rocker is a skateboard that is often seen in ordinary days, and there are many people who use it, and the double rocker is the foundation of the double rocker, which is very effective for the practice of technique and stability.

2. Small fish board: the surface of the small fish board is relatively small, so it is more difficult to find the center of gravity when sliding, the difficulty coefficient of the small fish board is higher than that of other leadership groups when sliding, and it is not suitable for novice applications.

3. Highway board: Highway board is a kind of long board, compared with other kinds of skateboards in length and width, the reliability of road board is very high, the speed is also fast, suitable for long-distance driving on the street, but its disadvantage is that it is very large and heavy, and the operation flexibility is lacking and it is inconvenient to carry.

4. Finger board: The finger board is mainly a small skateboard for leisure and entertainment, and the finger board can help people who play skateboarding in the room when the climate is not good, and the practice of various difficult movements can be felt.

Safety Matters

1. Adjust the wheels before use to make them lucky.

2. Adjust the elasticity of the cushion reasonably with a lock nut according to your own use.

3. Pay attention to waterproofing, try not to let the skateboard get wet, and do not slide on wet or rough roads.

4. Beginners need to use the help of relatives and friends to slide on the slope with a small inclination angle, and gradually switch to different slopes with the improvement of technical level.

5. In case of emergency, you can choose the foot brake or jump slide. When jumping off a skateboard, ask if you will bump into people or other objects around you.

6. If the replacement parts are needed, the replacement parts should be adapted to the specifications of the existing accessories. It doesn't have to be exactly the same as the original parts.

7. Bearings generally no longer need additional lubricating oil.

There are two types of skateboards: longboards, dragon boards, and fingerboards.

1. Longboard: A longboard is a long, wide skateboard type that is usually used for cruising, downhill, and long-distance gliding. Longboards are typically longer and wider than traditional skateboard boards, and the wheels are larger.

They offer a smoother gliding experience and higher speeds, making them suitable for tricks like skating and skateboard dancing.

2. Snakeboard: A dragonboard, also known as a two-wheeled board, pivotboard, or viperboard, is a special type of skateboard that consists of two independently rotating boards, each with a small wheel. The dragon board moves forward by turning the two boards left and right, and has a unique control method that allows for more flexible movements.

3. Fingerboard (Biro Fingerboard): The fretboard is a mini-sized skateboard, which usually uses finger operation to simulate tricks. The fretboard consists of a small plank, wheels, and shafts that allow for a variety of skateboarding tricks and stunts.

There are several types of boards that are commonly found in skateboarding:

1. Street skateboarding: This is the most common and classic skateboarding type. It has a short, sturdy shape that is suitable for trick moves and performances on flat ground such as streets, parks, and skateparks.

Street skateboard boards are usually narrower and have larger tails and snouts, which help with various tricks and flipping movements.

2. Front pedal: The front pedal is a wider and longer skateboard type, which is designed to be more suitable for cruising and comfortable gliding. Compared to street skateboards, front pedals typically have larger wheels, more stable handling, and softer axles, making for a smoother ride.

The front pedal is suitable for daily sliding and short walks on city streets, sidewalks or parks.

3. Hill Skateboard: The Hill Skateboard is a long, flat skateboard type that is longer than the front pedal, and usually has wider, softer wheels. This type of board is suitable for high-speed and long-distance gliding, such as downhill, gliding and skateboarding.

Hill skateboards generally have more stable handling and a more comfortable ride, making them suitable for a gliding experience that requires speed and smoothness.