Do all flutes have 16 holes?

Flute. There are usually 12 holes. Bamboo flute.

It is made of a bamboo pipe, the inner section is hollowed into an inner chamber, the outside is cylindrical, and there are 1 blowing hole, 1 membrane hole, 6 sound holes, 2 base sound holes and 2 sound auxiliary holes on the pipe body. The flute is the oldest Han musical instrument discovered so far, and it is also the most representative and national wind instrument among the Han musical instruments.

A horizontal blowing woodwind instrument commonly used in traditional Chinese **.

One of them, the Chinese bamboo flute, is generally divided into the southern qudi, the northern bangdi, and the alto flute in between.

Dizi is often used in Chinese folk**.

Chinese opera, Chinese Chinese Orchestra, Western Symphony Orchestra and modern ** are used in China.

One of the representative musical instruments. In the national band, the flute is an important wind instrument and is regarded as the representative of the national wind music. Most of the flutes are made of bamboo, but there are also stone, jade, mahogany, and bone flutes in ancient times.

However, the best raw material for making flutes is still bamboo.

Because the sound effect of the bamboo flute is better, the production cost is lower.

The choice of flute should be considered from the quality and category of the flute. The quality of the flute depends not only on the quality of the pipe itself, but also on the level of production. Inspect the bamboo quality of the flute.

The flute pipe requires solid bamboo (old bamboo grain). The bamboo grain is fine. The tube is straight and rounded.

The head of the flute body is generally slightly thicker than the tail, but the difference should not be too large. The tubing thickness is moderate. The inner wall of the flute tube is flat and smooth.

There are no insects and cracks in the whole body. The shape is beautiful and generous.

Check the volume of the flute. Generally speaking, loud volume is better. The flute with a large volume has a large resonance and strong vibration.

There is sometimes a tingling sensation on the fingers when blowing. Check the timbre of the flute. The general requirements for timbre are loose, thick, round, and bright, which depends on the quality of the flute itself on the one hand, and on the other hand, it is also closely related to the film technology and playing skills.

If you find that the bamboo is not too dry, you can plug all the holes of the flute, and then pour in some salt water, soak it for one to two days (according to the humidity of the bamboo, the bamboo should be soaked for a longer time), and then open the hole to pour out the salt water, rinse it with water slightly, wait for an hour, and then apply some cooked vegetable oil in the tube (preferably the pure red oil of the oil soup chili, with this oil can make the bamboo body red for a long time, and never break the worm), you can use it. If the bamboo is very dry and sturdy, it is best to scrub the area around the barrel and blowing holes with alcohol to achieve the purpose of disinfection. In addition, a little water in the bamboo will also be eliminated with the volatilization of alcohol.

17-hole flute.

The sound quality is the same as that of a 16-hole flute.

The difference between the sound quality of a 17-hole flute and a 16-hole flute.

1. Different fingerings.

16-hole recorder.

<>2. The key is different.

The 16-hole recorder can only play a few keys, each with different fingering and a single timbre; The 17-hole recorder can play all the disturbance gliss and deification sounds, and can be played in various keys at will.

3. Attributes are different.

The 16-hole recorder is an evolution of a wooden flute, which is not a formal instrument; And the 17-hole vertical let Jin flute is baroque.

Musical instruments, which originated in Italy in the 15th century, flourished in European countries from the 16th to the 18th centuries.

4. The holes are different.

When playing the 16-hole recorder, the hole held down is different, when the 17-hole recorder is playing, most of the part-part players have to hold down the hole at the back, while the 16-hole recorder can have 5 holes.

5. The vocal range is different.

The 16-hole recorder has a narrow vocal range, only one octave, and the intensity of the breath needs to be controlled when playing; The 17-hole recorder has a wide range of sound, more than two degrees, and its expressiveness is richer than that of the right-six-hole recorder.

The sound quality of a 17-hole flute is the same as that of a 16-hole flute. The difference between the sound quality of the 17-hole flute and the 16-hole flute 1. The fingering is differentThe body of the 16-hole recorder has 16 holes, which means that the vertical oak stove method is simple, easy to understand and master; The body of the 17-hole recorder has 17 holes, and the fingering is more than 16-hole recorder.

Summary. Hello, one hole is, two holes are, three holes are, four holes are, five holes are, six holes are.

What is the size of the hole in the flute?

Hello, one hole is, two holes are, three holes are, four holes are, five holes are, six holes are.

The flute belongs to the class of blown membrane instruments in the woodwind family. The flute is very expressive, it can not only play long, high-pitched melodies, but also express vast and broad moods, and at the same time can play cheerful and gorgeous dance music and graceful and beautiful minor keys.

The flute is composed of three sections, there is a mouthpiece, a body, and a tail, the difference between 17 holes and 16 holes is in the tail of the flute, the 17 hole tail is relatively long, there is one more hole, the lowest sound can be blown to B, and the 16 hole can only be blown to C, so the 17 hole is slightly wider than the 16 hole range, the 17 hole flute is also called the B tail flute, and the 16 hole is the C tail flute.

17-hole B-tail.

16-well C-tail.