The wireless function is turned off, how to fix the wireless function is turned off

Dear Lenovo users, hello! It is recommended that you uninstall the recently installed software or close the background software to test whether it is a software conflict, and if it does not work, it is recommended that you try to restore to factory settings

The first method: first go to your phone's settings, select Privacy, then select Factory Reset, and click Reset Phone.

The second method: select Wipe Date in Recovery mode, as long as you press the home button and the AFK button at the same time at startup to enter the recovery mode.

If it does not work, it is recommended that you take your phone to Lenovo's mobile phone service center for testing and repair;

IDEA Forum.

Think Forum.

Lenovo Community.

Open the Network and Sharing Center, "Higher Adapter" in the left column, click on it, and right-click to enable it if there is a difference.

There are two methods, one is through the diagnostic tool that comes with the system.

The second is the 360 disconnected first aid kit.

The method of repairing the turned off wireless function can be achieved by following the following steps:

3. In the pop-up cmd dialog box, enter the sfc scannow command to fix it.

4. After the repair is completed, continue to enter the netshwinsockreset command and press enter to execute.

5. In this way, the sub-wireless network connection can be used normally.

Computer FN shortcut key FN + keyboard with wireless logo key.

Sometimes when I use the computer, I find that the computer is wireless and the end end cannot be opened, and I can't connect to the wireless network. The status quo of the problem, the wireless won't turn on, the display is turned off, and then the wifi signal can't be found.

You can click the WLAN icon of the network icon, and the WLAN will be turned on or off after clicking. When you turn it on, the wireless signal will be displayed. Then you can connect your own wifi signal.

Computer wifi frequently asked questions

Left-click on the Start menu, select Settings, select Network & Internet after opening, and click on WLAN to turn WLAN on. Then click on Show available networks, and you can connect your own wifi.

If it's a wireless drive issue. Then the wireless driver needs to be reinstalled. Right-click on the Start menu and select Device Manager. Click the network adapter to check whether the wireless driver has an exclamation mark.

Left-click the network connection icon in the lower right corner, select Open Network and Sharing Center, select Manage Adapters, and double-click to enable Wi-Fi. If the wireless function of the wireless router is not turned on, then go to the router settings page to turn on the wireless function.

Enable Wi-Fi:

Log in to your router's settings page.

Note: What should I do if I forget my router administrator password?

On the router's settings page, find and turn on the Wireless Settings or Wi-Fi Settings option, and then enable the wireless network.

After the router turns off the wireless function, it can not connect to the wireless network of the router normally, nor can it search for the wifi signal of the router, and can only use the wired network of the router.

First of all, the landlord needs to find a computer, connect to one of the LAN ports of the router through a wired connection, enter the background management address of the router, this address should be on the nameplate of the router, and enter the address into the browser to enter the background management interface of the router, of course, some models of routers need to enter the administrator password to enter, without the administrator password is not able to enter.

After entering the background management interface of the router, find the Internet settings, find the wireless parameter settings, turn on the wireless network switch, and you can also set the name and password of the wireless network after opening.

After setting the parameters that need to be adjusted, click Save to automatically restart the router, and you can do it after the restart is completed.

How to fix the wireless function of the computer:

1.After the computer is turned on and connected to the wireless Internet, enter or press enter in the address bar, enter the username and password of the router, click OK, and click the setup wizard on the left side of the wireless router setting window that opens.

2.In the settings window that opens, click Next;

3.Next, left-click on ADSL Virtual Dialing, and then click Next;

4.In the small window of the setup wizard, enter the Internet ID and password, and then click Next.

5.Enter the relevant values as required and click Next;

6.When the wireless router is set up, click Done to log out.

1) Open the start menu - right-click in the blank space in the lower right corner - properties - custom, and tick in front of "Run Command" - OK.

2) Click Run – cmd

3) Open the Control Panel - Network & Internet - View Network Status & Tasks - Change Network Adapter.

4) Enter netsh wlan set hostednetwork mode=allow ssid=account number in the cmd command window, key=password (to type English or numbers), you can right-click the mouse to paste, press enter, and a wireless network 2 will appear in a while.

5) Proceed to enter netsh wlan start hostednetwork in the cmd command window

Done, so that the invalid function is launched, and fixed.

Summary. 2.Click on the "Backup & Reset" option in the page;

3.Click the "Erase All Data" option at the bottom to enter the system factory reset page;

4.Finally, click the "Restore Phone Factory Settings" button at the bottom, confirm the factory reset operation, enter the phone verification password, and the factory reset process will be automatically entered.

How to turn on the wireless settings of the mobile phone when it is turned off.

Hello, I have seen your question and am sorting out the answer, please wait for a while How to turn on the wireless settings of the mobile phone.

Click the "Erase All Data" option at the bottom to enter the system factory reset page; 4.Finally, click the "Restore Phone Factory Settings" button at the bottom, confirm the factory reset operation, enter the phone verification password, and the factory reset process will be automatically entered.