How to decorate balloon strings, how to decorate balloon strings

**Introduction Balloon decoration with its strong affinity, unlimited creative space, for a variety of activities to create a joyful or romantic atmosphere, but usually the balloon decoration used in celebrations is not only expensive and difficult to make. Today, a few minutes will teach you how to create beautiful balloon strings with plastic rope and balloons.

You will need scissor-wide scotch tape balloon plastic rope foot-operated inflatable air pump 1, inflate the balloon with a foot inflatable air pump, and the inflated balloon is knotted with the excess balloon tail in a circle, and each balloon should be basically the same size.

2. Cross the plastic rope and pull the rope above from the small circle formed by the cross to form a small slipknot 3. Put the tail end of the balloon into the small slipknot and tie it well, adjust the tightness to ensure that the balloon will not leak or fall off.

4. Repeat the second and third steps near the previous tied balloon, and so on, and the interval between each balloon should not be too large to affect the compactness of the balloon string. Cut off the excess plastic rope once the ideal length is reached.

5. Fix the tied balloon strings with scotch tape where they need to be decorated. When decorating, you can adjust the shape of the balloon string as needed.

Did you know? In the second or third century, the first hot air balloon lanterns were invented in China and used to transmit military signals.

Long ropes, balloons, arch shelves.

01 Prepare multiple balloons, blow them to about the same size, tie each balloon in a knot with a balloon handle, and tie it.

02 Use a long rope to tie the roots of the two balloons first, to master the change and rent the distance, not too tight, so that the third balloon can not be tied again, nor too loose, it will not look good when the rope is exposed, and tie a group of balloons with the right tightness.

03 In the same way, make many sets of balloons and tie each group of balloons to a long rope.

04 Prepare an arch shelf, fix the many sets of balloons on the arch shelf, and the balloon string nuclear omen decoration is ready.

The balloon decorating tutorial is as follows:

1. The shape of a heart.

Fill the prepared round balloon or heart-shaped balloon with an even size, and tie the tail inflator with a dead knot to prevent it from leaking.

Put the inflated balloon on the table or the ground and pose in a heart-shaped pattern, if you can't see it, you can draw a book of hearts and pose according to the pattern.

Use double-sided tape or other viscous objects to glue these things one by one, and the pasting process must be dug in accordance with the order of the shape, so as not to destroy the shape.

After all the gluing is done, a love shape is done, you can stick it on the wall or place it on the ground, it is a good decoration.

2. Flowers. The petal shape usually requires 5-6 balloons of two colors, with the petals being posed with one color and the stamens being the other.

Stick evenly sized balloons of the same color into a closed loop with double-sided tape, 4 or 5 balloons.

Stick another color onto the petals, preferably with each balloon of the petals, to prevent it from warping.

If you want to hold it in your hand, you can also tie a ribbon around its tail.

3. Arches. There are many balloons needed to make an arch shape, so prepare the number according to the size of the arch.

Tie the already inflated balloons together in groups of four, preferably choosing two different colors so that they don't look too monotonous.

Tie these things to the prepared arched shelves, and the shape is ready.

4. Lollipops.

To make a lollipop, you need to use a magic balloon in the shape of a long strip, and choose two long balloons of different colors.

The two apexs are twisted together at a length of about five centimeters, and then the five-centimeter part is twisted into the shape of an ear and linked together.

Take another five centimeters of one of the balloons and twist them into an ear shape and place them between the two ear knots from the previous step.

Wrap around the middle knot and fix it, and so on and twist it twice, and the shape is complete.

In the absence of windows in the children's room, the main goal of the renovation should be to create a bright, airy environment. First, consider using bright colors to decorate walls and furniture, such as white, light blue, or light yellow, which can reflect light and make the room look brighter. Secondly, some artificial light sources, such as LED lamps or energy-saving lamps, can be installed to provide sufficient light.

Consider installing mirrors or using shiny materials such as glass or metal, which can reflect light and make the room look more vibrant.

With the decoration device, you only need to enter the area + city, and calculate the most affordable local market in 3 seconds**: [Tuba Rabbit Big Platform Counts**].

No longer worry about the company's price increase, omission and price increase.

When it comes to ventilation, consider installing some ventilation equipment, such as an air purifier or dehumidifier, if possible, to maintain the air quality in the room. In addition, consider using plants such as spider plants or centipede grass to improve air quality.

In the local market, such a renovation can cost around 5,000 to 10,000 yuan, depending on the quality of the materials and equipment chosen.

Finally, while the absence of windows in a children's room can present some challenges, it is still possible to create a bright, airy environment with proper renovation. In the process of decoration, we should pay attention to the selection of harmless materials and equipment to protect the health of children. At the same time, children's preferences and needs should also be taken into account to create a saf-eda cherry blossom paradise that they enjoy.

Balloon decorations look good and can be used: monochrome balloons, two-color balloons, tri-color balloons, colorful balloons.

1. Monochrome balloons.

If you only use one color balloon to decorate your wedding room, most people will choose pink. Pink is romantic and unblinking, and it is a color that many girls like very much. You can choose to stick balloons to the wall to create any creation, or you can pose them in the shape of hearts or letters.

2. Two-color balloons.

Balloon decoration wedding room can also choose two-color balloons, such as white and pink, which looks girly and sweet, and you can also add some rose petals to set off the atmosphere. Or pink hand color plus purple, purple has always given people a mysterious feeling, which can make some balloons scattered on the ground, adding a touch of laziness to the mystery.

There are also white and purple or white and blue, all of which are unique flavors.

3. Three-color balloons.

It can also be arranged by using the shade of the balloon's color, such as white with light purple and dark purple. From the outside to the inside or from the top to the bottom, it depends on how you like how to arrange. The layout of the wedding room is mainly to look at the overall display, and you can also use some other elements to decorate and match it with balloons.

4. Colorful balloons.

When decorating the wedding room, you can choose to paste balloons of different colors on different locations such as balconies and rooms. The shape can be played at will, such as heart-shaped, round, or superimposed, and generally as long as the color matching is good-looking, you will not go wrong with how to arrange it.

1.Make arches with balloons.

First you can choose two balloons of the same color and tie them together with each other; Then add two sets of balloons of different colors tied together, at this time you have to wrap it around the plastic tube, pay attention to the colors must be staggered, you can superimpose a layer on those colors, and so on, until you want the length you want. Be sure to measure the size first, so that the length will be more appropriate, and after you are done, you must fix it in the position you need.

2.Use balloon flower clips to make a flower pattern.

You can use five balloons of the same color to make petals, and the other group is to make a flower center, and after they are all done, they will be tied and fixed with ribbons, and then fixed on the wall, which looks very beautiful.

3.Make peach hearts with heart-shaped grids.

You can use a small balloon and blow it to the size of an apple, and then it pulls the grid to make a heart, remember to stuff the small balloon into the outermost circle of the grid and then fix it, you can use different colors, free combination, so that the heart shape is also very beautiful.

4.Decorate the ceiling with balloons.

This method is relatively simple, you can directly use hydrogen to hit the balloon, and then it will stick to the ceiling, but we all know that hydrogen will be more expensive, and this kind of storage time will not be too long, it will fall by itself after a long time, and this stability is not good, so it is proposed to use two-sided tape is both affordable and aspect. <>

5.Decorate the aisle with balloons.

You can tie two of the same color together, and then the other group uses a different color, and then wrap both sets around a thicker rope until the desired length is done, and it is best to tie these wrapped balloon ropes to the railing of the aisle, so that it is relatively simple to fix, and it is relatively strong.

1. After the balloon is inflated, hold the air port with the thumb and index finger of the left hand.

2. Stretch the tail of the balloon to the right with your right hand.

3. Wrap the tail of the balloon around the back of your left index finger.

4. Then come out from the front of your left thumb.

5. The extra head is pierced through the gap between the thumb and index finger in a circle.

6. Hold the air outlet of the balloon and tie the knot, tie the tail of the balloon tightly, and the second one will operate in this way.

1. Inflate the long balloon, leaving about 3 cm long at the end, and inflate two.

2. The air valve and the small tail are knotted and fixed together, and the balloon is folded in half, like an oversized fritter.

3. Grasp the middle part of the balloon and twist it at 1 3 at one end.

4. Then twist a circle at 2 3, and the balloon will be divided into three sections, forming a total of three rings.

5. The three rings are arranged side by side, with the two twist points facing up.

6. The other hand presses up from the point corresponding to the twist of each ring below, so that each ring is pressed into two halves to form two petals, so that a total of 6 petals will be produced.

7. Group the left and right petals into a group and twist them around the center point so that each petal is independent and fixed.

Once the petals are ready, you just need to make another flower stem and attach it, so that you can make a flower out of a long balloon.