What is the specific job of the automation equipment management officer? Thank you

supervised equipment; operating equipment; Yes, the device is functioning normally.

Record the failure and status of the equipment on time; And report (some companies will appoint maintenance personnel).

Hope it helps you...

It is mainly the daily maintenance and handling of the machine.

Flexible manufacturing technology, computer integrated manufacturing technology and information technology.

Flexible manufacturing technology, also known as flexible integrated manufacturing technology, is a general term for modern advanced manufacturing technology. Flexible manufacturing technology integrates automation technology, information technology and production and processing technology, and forms an organic system covering the entire enterprise with the support of computers and software and databases that have isolated engineering design, manufacturing, operation and management processes in factories and enterprises in the past.

CIMS is the abbreviation of Computer Integrated Manufacturing System in English, which means Computer Integrated Manufacturing System. It arose with the development of computer-aided design and manufacturing. It is based on information technology automation technology and manufacturing, through computer technology to disperse in the product design and manufacturing process of various isolated automation subsystems organically integrated, the formation of multi-variety, small batch production, to achieve the overall benefit of the integrated and intelligent manufacturing system.

Information technology (IT) is a general term for various technologies used to manage and process information. It mainly applies computer science and communication technology to design, develop, install and implement information systems and application software. It is also often referred to as information and communications technology (ICT).

It mainly includes sensing technology, computer and intelligent technology, communication technology and control technology.

You said this work.

In fact, it can also be said that the work content of this type of work is approximately:

1. First of all, automation equipment.

The version must be mechanical, electrical, gas, and liquid rights.

Combined equipment, of course, there may be other aspects, and at the same time, there are only one or two or three, or even four kinds of equipment, it can be said that it is not a simple structure, otherwise it will not be called "automation";

2. The assembly is mainly for the installation of equipment designed by the company or a designer, you must master the basic mechanical knowledge, and more importantly, you will know the diagram (mainly mechanical, if you know the circuit diagram is better), understand the mechanical terminology and identification (icon), etc.;

3. One of the more important items in assembly is that you must have a certain fitter foundation and electrical knowledge;

4. Commissioning, as the name suggests, means that after the completion of assembly, test operation and adjustment are carried out according to the design standards.

It is difficult to say what professional knowledge is needed, what I have mentioned above is only a preliminary introduction, but if you can really do it, it is not ordinary, roughly speaking, it is commonly used: fitters, mechanical drawings, tools and assembly knowledge of standard parts, electrical, etc.

Theoretical knowledge + practical experience, but practice is more important.

The façade (image leader) refers to the most prominent and recognized best-looking members of the idol group group who are elected as the façade leaders. It is common in Japanese and Korean groups, that is, the image representative of the group.

Job description.

The façade is the "image spokesperson" of the group. A group has a clear division of labor, the lead singer, dance, rap and so on. The so-called façade responsibility, as the name suggests, is to support the façade, the best appearance, the best popularity, or the group members who represent the existence of the group with the greatest external influence in the group.

This division of labor is usually more distributed in Japanese and Korean multi-person combinations. The façade manager (image manager) is usually the official designation of the company.

is responsible for the appearance of the team.

The best-looking and best-looking.

Find a book on the introduction to the ISO system. Its main processes: quality management team building, appointment of management representatives; Preparation of quality manuals, procedures, and operating procedures.

Then there is execution, inspection, correction. It is basically done according to the PDCA (Plan, Do, Feedback Control, Correction) process.

It is recommended to adopt the ISO9001 system standard. The standard covers your process.

All of them are available, including the design and development process.

There are a lot of them, and every company is different, so it's recommended to find a consulting company.

It is estimated that there are not many people who can answer your question, and the main question is that your question is not accurate. "Non-standard automation equipment", what is your equipment called? For example, if you don't want to continue to describe "aeronautical installations, machines and equipment", you can ask one of my intellectual property colleagues to help you find it in category 7.

Machinery and equipment are generally in the seventh category.

If you want to be more specific, you also need to know what kind of machine your machine is!

The automation facility belongs to Group 0902, Class 9 of the Trademark Classification;

1.Automation technology is widely used in industry, agriculture, military, scientific research, transportation, commerce, medical, service and household.

2.The use of automation technology can not only liberate people from heavy physical labor, part of mental labor and harsh and dangerous working environments.

3.Moreover, it can expand the function of human organs, greatly improve labor productivity, and enhance human ability to understand and transform the world.

Look at what equipment is used

Industrial process automation: the automatic operation of control equipment in the factory, this theory is relatively early, and the era of automation has been proposed, of course, the entire industry is now fully implementing such control; And equipment maintenance and management: although this theory has been introduced for some years, the actual implementation progress is slow, and it has gradually been paid attention to in the past two years, so in terms of the development of the next 5-10 years, I personally think that there are more needs for mechanical and electrical equipment maintenance and management.

Six-day shifts, wages are in the middle of the park.

It's okay, after all, it's a big company, but Korean-funded, Taiwanese-funded, and Japanese-funded are about the same, and if you can, it's best to go to a European and American company.

Whether you have a certificate or not does not affect your ability to work on Party B's budget, and not having a certificate just cannot review other people's budgets.

It doesn't matter if you don't have a license, but you have to be able to do budgeting and settlement.

It's easy, too! And you tell the boss that you're almost getting your certificate, but you'd love to have the job, and to show him some real talent and show him that you can do the job.

The installation and maintenance of electrical automation equipment is to complete the installation, programming, commissioning and maintenance of electrical automation equipment.

Training objectives: to cultivate the professional knowledge and skills required for modernization, to master the direction of electromechanical and electrical, to have a strong ability to operate automation equipment, and to master the knowledge and skills of electrician and electronics, and to have the ability to complete the installation, programming, commissioning and maintenance of electrical automation equipment.

Professional qualification: Maintenance electrician (senior).

Compulsory courses: installation and maintenance of electrical and lighting circuits; Typical analog circuit assembly, debugging and maintenance; Typical digital circuit assembly, debugging and maintenance; motor and transformer troubleshooting; installation and maintenance of commonly used electric traction control circuits;

installation and maintenance of electrical equipment for machine tools; PLC control circuit installation and commissioning; high and low voltage power supply and distribution; mechanical and electrical drawing and CAD, sensor and detection technology; hydraulic and pneumatic system assembly; Installation and commissioning of mechatronics equipment.

Employment direction: for large and medium-sized enterprises inside and outside the city, engaged in the installation and maintenance of indoor and outdoor electrical and lighting lines, the installation, commissioning, maintenance, operation management, fault detection and repair and sales of electrical automation equipment, and the operation of power transformation and distribution.

The terminology of the process of autonomous operation of strong and weak current equipment, simply speaking, your refrigerator is a kind of electrical equipment, because there are a lot of control elements that can be operated automatically without human operation, then these components belong to electrical automation equipment, in terms of employment, it is not bad at present, and the term of mechanical automation is the same as a wide range of professional applications, and will continue. Of course, it is technical work, and the senior engineer who has done a good job will give points.

The prospect is also good, that is, to train senior skilled personnel (senior workers) engaged in the installation, programming, commissioning and maintenance of electrical automation equipment.

The treatment is average at the beginning, and the salary will be very high if you have to work hard to take some certificates in the later stage.

It must be regarded as a door technology work, mainly learning PLC control circuit installation and commissioning, single-chip microcomputer control equipment installation and commissioning, inverter technology application, AC and DC speed regulation system installation and commissioning, factory electrical circuit design, sensor technology application, etc.

The employment prospects are still good, but they must study hard and combine theory and practice. Especially the practical hands-on ability. This is important.

If possible, try to find a factory where you can practice, get in touch with actual equipment, learn more, ask more questions, use your hands and brains more, and it is best to learn some more programming on the basis of what you have learned in school, which will be very helpful for future employment. Don't have short-sightedness, the treatment will not be particularly high at the beginning (of course, depending on the final service unit), and work hard to verify in the later stage, especially the senior certificate, not only will there be a breakthrough in the treatment in the future, and the accumulated experience will be rich, but also to undertake some installation or maintenance by yourself. At present, many projects outside are done by non-professional personnel, and there is a shortage of real professionals.

That's where I work in electrical equipment repair. Sometimes I also do some work.