How to calculate the width of the wallpaper 60 on the wall, 12 meters in the living room

1.First of all, you have to calculate how many pieces of wallpaper can be cut per roll:

Algorithm: The length of the wallpaper (the height of the room + the distance between the flowers) = the number of widths that can be cut out of each roll For example, if you want to buy a meter wallpaper, the height of the room is meters, and the pattern cycle is 20 cm (this parameter is not available in most wallpaper pages).

10 ((here you have to choose to remove the decimal = 3).

Note: Generally, the floor height is between meters, and a roll of wallpaper can only be cut to 3 pieces. After cutting 3 pieces in a roll, the remaining short ones that are not long enough can be made up of short places above and below the window and above the door.

2.How many wallpapers do you need:

Algorithm: Room Perimeter Width of wallpaper = Number of frames required

For example, the perimeter of the room is 18 meters (after deducting the width of doors and windows).

18 (rounded up = 34 here).

3.Folded into rolls:

Algorithm: The number of wallpapers required The number of pieces that can be cut into each roll of wallpaper = the number of rolls For example: the above needs 34 pieces of wallpaper 3 = rolls (here you need to round up 12 rolls).

Living room circumference? That's 20 widths, you see how long your wallpaper is. Also, if it is a large pattern, the paving needs to be on the flower, and the loss may be a little higher, so you look at the situation of the wallpaper.

60 is 60cm

If the wall you want to stick to your living room is 1200cm wide, it is 1200cm

1200 divided by 60 equals 20

Hello dear! Glad for your question! 50 meters long and 60 centimeters wide wallpaper can be pasted a few squares:

The area of 50 meters long and 60 centimeters wide is equal to 30 square meters, which is relative to the area of the rectangle, the area of the rectangle is equal to the length times the width of the slag, the length is 50 meters, the width is 60 centimeters, that is, the meter, and the multiplication of the two equals 30 square meters. The first point of this question is that you can't get the unit wrong, a length is a meter, a width of four centimeters, to convert the width of centimeters into meters, you can calculate the area.

Summary. Hello, the wallpaper door width is different, the windows and doors of each wall are also different, buy wallpaper to do no more, no less, can be calculated by the formula of (l m + l) x (h + h) + c m. l is the length of the four walls behind the window and door; m is the door width of the wallpaper:

Add 1 as a margin for splicing; h is the height of the wallpaper pasted; h is the distance between two adjacent patterns on the wallpaper, as a longitudinal splicing margin; c is the required wallpaper area above and below windows and doors. The calculation should be in meters and the area should be square meters. The calculation is inexhaustibly divised, the number after the decimal point.

How to calculate the width and length of wallpaper, hello, wallpaper door widths are different, the windows and doors of each wall are also different, buy wallpaper to do no more, no less, you can use the formula of (l m + l) x (h + h) + c m to calculate. l is the length of the four walls behind the windows and doors of the chaotic bridge; m is the width of the wallpaper: add 1 as the margin of splicing; h is the high age of the wallpaper; h is the distance between two adjacent patterns on the wallpaper, making a longitudinal splicing margin; c is the required wallpaper area above and below windows and doors.

The calculation should be in meters and the area should be square meters. The calculation is inexhaustibly divised, the number after the decimal point.

A 4-meter wall, a 3-meter wall, a 2-meter wall, how do you report the size?

It is not necessary to report the height.

Dear, you have to report the height.

However, the wallpaper has loss, and it is generally necessary to use about square meters of wallpaper for the texture, and about square meters for the actual use of a roll, and about about square meters for the wallpaper without texture. The area of the wall is also the length multiplied by the width equal to the number of squares. For example, a wall needs to be wallpapered, and the length of the wall is 6 meters, the height is meters, and the area is the mold

6 times the square meter. If you use wallpaper with the right texture, that is: divide by the roll, then you must use 4 rolls of wallpaper.

The height seems to be meters.

Dear, depending on which kind of wallpaper you use, there are calculations on it, and you can choose which calculation method according to the wallpaper you choose.

Twenty-five square walls with a width of 60 cm wallpaper, how much wallpaper is needed.

Twenty-five square walls with a width of 60 cm wallpaper paste, how much wallpaper do you need! Hello, happy to answer your <>

Pro-twenty-five square walls, with a width of 60 cm wallpaper paste, the need for wallpaper as follows: the area of the wall as follows: The square of a roll of wallpaper = the number of wallpaper rolls needed to calculate this is no problem, in addition to the trouble, to calculate the area of the wall, but also to calculate the area of the wallpaper (the area of each roll of wallpaper is not the same with different specifications) and remember to calculate the loss, if the loss of flowers will be larger. If you calculate it in this way, some students who are not too sensitive to numbers will feel a little more troublesome, so let's make it simple and rude: the actual perimeter of the wall Wallpaper can be pasted wide (each width multiplied by the number of available pieces) = the number of rolls needed In this way, it is not clear enough to estimate the bending meter, let's actually give an example:

The specification of wallpaper on the market is meter width * 10 meters long = square (the specification of most wallpapers on the market) Most of the wallpaper common in the wallpaper market is this specification, 10 meters a roll. The original floor height of home decoration is generally between 3 meters, in the case of baseboards, top lines or ceilings, the height of the wall is between meters, that is, no matter how to paste a roll of wallpaper can only cut 3 pieces, the width of the paste (involving the flower and loss, generally can not paste 4). That is, the actual perimeter of the wall needs to be counted in rolls, so that the quiet calculation is not simple and convenient!

It cannot be said that this method is error-free, but most rooms and wallpaper are suitable for this calculation formula in most cases. There are many types of wallpaper: PVC wallpaper, non-woven wallpaper, pure paper wallpaper and wallcovering, flocking wallpaper, foamed wallpaper, etc., the corresponding wallpaper is very rich, and the colors are also rich and diverse, which can reflect different textures and different styles.

However, the matching of wallpaper must be paid attention to, and it must be coordinated with the overall style and color. Hope mine can help you <>

Do you have any other questions?

1. Measure the height of the wall first, see if you can paste 2 pieces in 5 meters, and try to see if the flowers are enough.

2. Measure the perimeter of the bedroom, divide the perimeter by meters to get the width.

3. If one volume is enough for 2 pieces, the number of sheets is divided by 2, and only enough for one volume is the number of volumes.

What kind of wall is not recommended to use self-adhesive paper, which is not durable and not very environmentally friendly.

The bedroom is not oil painting can choose dark colors, one is that it is deep and affects the quality of sleep, and the other is that it will feel that the furniture is too light and floating, with light colors, and the pink wall looks comfortable to coordinate.

48 Zhang Zuxiang. Zhao Shen Bo Xiaowei.

The circumference of the four walls is divided by the width of each roll of wallpaper, and the length of each roll of wallpaper is divided by the height of the floor

It depends on the layout of your room, which is normally 48 sheets.