What to do if the Apple 7 s Home丨 fails

The preliminary judgment is caused by the return of the home button or the loose connection. In this case, please bring the relevant products to the after-sales service center for testing and replacement.

It should be that the home cable is broken, just change the cable.

There are several ways to do this as follows:

The first is to gently flick the home with your fingers, and after a while, white dirt may appear, and then repeat the "flick" until it is normal;

Second, open any app and press and hold the power switch for a few seconds until the screen shows a slide key indication. At this point, you can let go of the power button, but don't slide it to power off, and press the home button for a few seconds at the same time until the screen returns to the springboard. Now that you've readjusted the home button, it should work fine.

However, if you still can't use the home button after trying, you can judge that it may be a hardware problem and you need to find an Apple after-sales repair center to solve it;

Third, connect the small 4 with the external power supply, press the home button, until the voice interface appears, and remove the external power supply.

The phone runs for a long time without resting, and the home button fails 1After running the phone for a long time, you should take a proper break, and don't use the home button all the time2Water ingress on your phone may cause the home button to malfunction.

The key has a lifespan, a home button can only be pressed tens of thousands of times, after which the home button is easy to fail and enter the dust can also lead to the failure of the home button

1) Open Settings -

2) In the list of settings, please click on the General column, as shown in the image (3) Then in the list of available features, please find and click on the Accessibility column, as shown in the image (4) In the list of accessibility features, there is a function called AssistiveTouch, click it to continue.

5) Then turn on the AssistiveTouch switch option, as shown in the image below.

6) When you turn it on, you'll see a small white dot icon appear on your iPhone screen. There are many functions in this virtual white dot function, but the most important one is a button function that can help users return to the home screen.

Repair, or open the dots.

Open the dots and save a lot of trouble.

1. Excessive use time.

The Home button is one of the most used buttons on iPhone, and of course, it is also the most problematic place. If you use it for too long, it is very likely that the home button will fail.

2. The home button shrapnel is deformed.

Tests have proved that when most of the iPhones with the home button out of order were disassembled, they found that there was no support under the metal sheet, and there was some deformation, and the shrapnel on the screen was also slightly deformed. Poor contact between the cable and the screen will naturally fail.

3. Go to the nearest after-sales center to replace one.

Send it for repair, there's something wrong with this button.