Is it harmful to the body to wear a bracelet that has been boiled with wax?

No, this is not harmful to the body, you can rest assured of this.

The boiling wax of jade is the last process of jade processing, and the boiling wax of jade in the national standard is optimized, and will not affect the properties of the jade itself, and there is no special indication on the identification certificate. Most of the jade carvings on the market go through the process of boiling wax.

Boiling wax is the last step of jade after design, carving, and polishing, and has been widely accepted by consumers. After the work has been polished, the wax is put into a wax pot at a constant temperature for a period of time, and then the jade is taken out and the wax on the surface is quickly dried to let it cool slowly. Solid paraffin wax is generally used for boiling, and the paraffin wax is melted in the rice cooker to maintain a constant temperature, and then the jade is put in, according to the number of cracks, the depth of the time, to control the constant temperature time.

Mainly according to the principle of thermal expansion and contraction, because the movement of particles in the object will change with temperature, when the temperature rises, the vibration amplitude of the particles increases, causing the object to expand, allowing the paraffin to enter the cracks of the jade to cover the cracks of the jade. Because the light transmission of the wax into the jade will tend to the main body, so that the crack is not easy to see, or cannot be seen at all, further optimizing the appearance of the jade work. However, boiling wax can not eliminate the stiffness and large cracks inside the jade, and only has a certain optimization effect on the shallow cracks on the surface.

Boiling wax can not completely change the crack of the jade itself, if you do not wear it for a long time or contact with hot water, the gap will still appear again, and it may disappear again after playing.

I think this must have an impact on the body, because this will definitely increase the temperature in the process of heating, and the impact on him is also very large, so we must pay attention to this matter.

Jadeite boiled wax, the most common is used for the processing of jadeite bracelets, the polished bracelet, soaked in the melted paraffin liquid for a few minutes to ten minutes, and then take it out to dry naturally, wipe the paraffin wax.

The principle of boiling wax is to let the paraffin wax invade and fill into the gaps of the jadeite crystal, so that the jadeite looks more transparent and brighter, and can also make up for many subtle flaws. After a stage of boiling wax jadeite bracelet, there may be a phenomenon of water getting worse, drying, and discoloring, which is not a jadeite variant, but the effect of boiling wax has disappeared.

1. Another method is to use a small pot or glass measuring cup, put the wax and pendant or bracelet in, and then put the whole in a pot of cold water to melt the wax, boil the water for 5 to 10 minutes, and finally take it out and wipe it clean.

2. Put water in the pot and bring to a boil over high heat; Put the jade jade in a pot and cook for 10 minutes; Slow heating is required; The temperature should not be too high, not more than 120 degrees; It is advisable to boil several times before the wax can be boiled cleanly; After each heat, wipe the jadeite jade repeatedly with a clean cotton cloth or toilet paper.

3. The methods of removing the wax on the surface of the jadeite bracelet are: cleaning with an ultrasonic cleaning machine; Start by cooking for about 5 minutes. (Note: The water should be slowly heated from room temperature to boiling, and the jadeite should not be directly put into hot water.)

4. Round bracelets and lead slips need to be carved for trouble. That's about it, by the way, there is also a wax boiling process, saying that polishing has to be boiled wax, I can only say hehe. Don't touch the jade if you don't understand this thing, the ice you may buy back is a stone, and I won't fake the process, it's all available on the Internet.

5. Hello, boiling is possible, that is, the wax on the surface can be boiled off, but it is boiled for a long time, and it has not been tested, and after boiling for a while, it is directly put into cold water, and the result is that the crack is provoked.

6. At this time, the solid paraffin has melted into liquid. Open the lid and put the jade that has been cleaned and dried in advance into the rice cooker, and keep it warm for 3-7 days, and then take it out one by one, dry it with a paper towel, and then wipe it repeatedly with a cotton cloth until the surface is polished.

The first thing to know is why jade is waxed.

First, waxing can make the surface of jadeite jade more uniform and smooth, with more delicate luster and brightness, and at the same time, it can also achieve the effect of "sealing" the jade and prevent oil from entering;

The second is that waxing can cover up the cracks on the surface of the jade, making the jade more "perfect", and the cracks of the jade can be divided into two kinds, one is the open crack, which is visible to the naked eye on the surface of the jade, and the other is the dark crack, which is distributed inside the jade. In order to conceal such cracks, merchants often wax jade to fill in these cracks.

Waxing techniques and effects:

The simple way to deal with it is to heat the jade slightly, then apply wax powder, and let the wax powder enter the crevices of the jade; The complication is to soak the jade in a paraffin solution. The principle of the two approaches is similar.

However, there are also drawbacks, after this kind of jade is used for a period of time, the paraffin wax in the jade slowly volatilizes and disappears, so the cracks of the jade appear, and the luster and brightness are not as good as before.

Therefore, any change in the jade environment will increase the possibility of cracks, even if it is left unmoved, cracks may also occur, earlier jade, this kind of problem is also more common, especially the kind of jade quality is not good, the waxing process of jade heating cracks also occur from time to time, jade quality of good materials, the probability of this situation is much smaller.

Whether it is a bracelet, a pendant, or a handle, it will be polished and waxed, even if there are no cracks on the surface of the jade, the same steps are required. According to some masters, waxing is not only to cover up small cracks, but more importantly, to brighten, after waxing, it looks high gloss and more oily. In addition, if the cracks are allowed to exist, impurities will invade in the process of wearing them again, and over time, these impurities will more or less penetrate into the jade and affect its jade quality.