-
Anonymous users2024-02-10There are several possibilities for a fingerprint lock alarm:
1.The battery is low voltage alarm, and the battery needs to be replaced, so that it will not affect the use.
2.If the door is not closed properly, it is closed tightly, and the police will be called all the time.
Generally, in the first case, it is recommended that you try to replace the battery first.
1.The door lock screw is loose, solution: re-tighten the door lock screw, and use the administrator's fingerprint or password to disarm the alarm.
2.If the power is too low, the low voltage prompts an alarm, and the solution is to replace the battery with a new one.
3.The door is not closed, the solution: re-close the door.
4.Accidentally collided with the anti-pry alarm switch, solution: use management or family fingerprints, passwords to cancel.
-
Anonymous users2024-02-091. The battery is low voltage alarm, and the battery needs to be replaced, so that it will not affect the use.
2. If the door is not closed properly and closed tightly, the police will always be called.
1. Fingerprint lock.
Fingerprint lock is a kind of intelligent lock with the fingerprint of the human finger as the identification carrier and means, which is the perfect crystallization of computer information technology, electronic technology, mechanical technology and modern hardware technology. Fingerprint locks are generally composed of two parts: electronic identification and control, and mechanical linkage system.
The uniqueness and non-reproducibility of living fingerprints determine that fingerprint locks are the most secure locks among all locks at present. In addition to fingerprint identification, fingerprint locks shall be equipped with emergency mechanical keys according to the provisions of the Ministry of Public Security.
2. Definitions. The English name of fingerprint lock is fingerprint lock Fingerprint lock classification: fingerprint door lock fingerprint car lock.
-
Anonymous users2024-02-08The smart lock is newly installed and the alarm rings often.
-
Anonymous users2024-02-07How to enter the management, always call the police.
-
Anonymous users2024-02-06The fingerprint lock keeps alarming the release method
Tools: iphone12, Xiaodi butler.
2. Then in the settings interface, click Alarm Settings.
3. In the alarm password setting interface, click to empty the alarm password, so that the fingerprint lock will not ring.
The reason why the fingerprint lock keeps alarming
1. The panel fixing screw of the fingerprint lock is loose.
Now the fingerprint lock door outside the panel below, generally have the anti-pry alarm function, if the panel fixing screw of the fingerprint lock is loose, the anti-pry device of the door outside the panel is triggered will cause the fingerprint lock to alarm all the time, only need to tighten the fixing screw in the door, and then through the fingerprint lock panel, after verifying the administrator information, you can easily remove the anti-pry alarm function of the anti-theft door fingerprint lock.
2. Enter the wrong password many times.
In addition to the anti-pry alarm function, the anti-theft door fingerprint lock is also designed with multiple password input errors, and the system automatically locks and prompts the alarm function. For the case that the fingerprint lock password is locked after multiple inputs, you only need to wait for the system lock time to be automatically lifted, and then you can successfully cancel the fingerprint lock alarm function of the anti-theft door by verifying the administrator information.
3. The door body sags.
Due to the sagging of the door, the deadbolt can not be completely locked in place, and the fingerprint lock will always be alarmed. Solution: It is to adjust the anti-theft door hinge to restore the horizontal state of the door body, and then solve the problem that the fingerprint lock of the anti-theft door has been alarming.
4. The fingerprint lock battery is too low or dead.
When the fingerprint lock battery is depleted or too low, it will be prompted by ringing all the time. You only need to replace the fingerprint lock with a new battery, and you can easily solve the problem that the fingerprint lock of the anti-theft door keeps alarming.
-
Anonymous users2024-02-05The fingerprint lock old alarm has the following reasons:
If the power is too low, the low voltage prompts an alarm. In practical application, the life of many manufacturers' fingerprint locks is less than half a year, and the fingerprint lock does not prompt the user to replace the battery, and the frequency of replacing the battery is about 5-7 months. In this case, it is very likely that you will forget when you should replace the smart fingerprint lock battery.
The door was not closed. In daily life, we may not be able to pop out because the door is not closed in place, that is, the door is not really locked, it is false, and the smart fingerprint lock will issue a slant alarm at this time, which can effectively prevent us from the danger of locking the door due to negligence, solution: close the door again.
The door lock screw is loose, which may have triggered the anti-pry alarm switch. Solution: Retighten the door lock screws, disarm the alarm, and simply open the door in any correct way.
The fingerprint recognition rate needs to be improved. The main manifestation is that some people cannot use fingerprint locks, usually 1%-5% of people cannot use fingerprint locks. Workaround: Multiple identifications are required to pass.
-
Anonymous users2024-02-04Summary. 1. First of all, check whether the battery of the fingerprint lock is sufficient, if the power is insufficient, you can replace the new battery; 2. Check whether the fingerprint recognition system of the fingerprint lock is normal, if not, you can try to clean the fingerprint recognition head, or re-enter the fingerprint; 3. Check whether the connection cable of the fingerprint lock is in good contact, if not, you can try to check and replace the connection cable; 4. Check whether the fingerprint lock is set correctly, if not, you can try to reset it; 5. If the above measures cannot solve the alarm problem, you can try to reinstall the fingerprint lock, or contact professional maintenance personnel for maintenance.
1. First of all, check whether the battery of the fingerprint lock is sufficient, if the power is insufficient, you can replace the new battery; 2. Check whether the fingerprint recognition system of the fingerprint lock is normal, if not, you can try to clean the fingerprint recognition head with a fiber block, or re-enter the fingerprint; 3. Check whether the connection cable of the fingerprint lock is in good contact, if not, you can try to check and replace the connection cable; 4. Check whether the fingerprint lock is set correctly, if not, you can try to reset it; 5. If the above measures cannot solve the alarm problem, you can try to reinstall the fingerprint lock when it is cracked, or contact professional maintenance personnel for maintenance.
Fellow, I really didn't understand, I can be more specific.
1. First of all, check whether the battery of the fingerprint lock is sufficient, if the power is insufficient, you can replace the new battery; 2. Check whether the fingerprint recognition system of the fingerprint lock is normal, if not, you can try to clean the fingerprint recognition head with a fiber block, or re-enter the fingerprint; 3. Check whether the connection cable of the fingerprint lock is in good contact, if not, you can try to check and replace the connection cable; 4. Check whether the fingerprint lock is set correctly, if not, you can try to reset it; 5. If the above measures cannot solve the alarm problem, you can try to reinstall the fingerprint lock when it is cracked, or contact professional maintenance personnel for maintenance.
-
Anonymous users2024-02-03The reason why the password lock keeps alarming: the door lock screw is loose, the battery is too low, the door is not closed properly, and the anti-pry alarm switch is accidentally hit.
The door lock screws are loose. Solution: Retighten the door lock screws and use the administrator's fingerprint or password to disarm the alarm.
If the power is too low, the low voltage prompts an alarm. Solution: Replace the battery with a new liquid balance failure.
The door was not closed. Workaround: Close the door again.
Accidentally hit the anti-pry alarm switch. Solution: Use the administrator's or family member's fingerprint and password to cancel the service.
How to disarm the alarm with a combination lock
1. When the door lock has been locked and the "anti-theft alarm" function is turned on, the alarm will be given when the door is opened due to the door being pried and locked.
2. When the "door opening timeout" function is turned on, the door will be alarmed if it is not closed within the set time.
3. Reporting type: according to the alarm set by the user, the output time of the magnetic lock port is driven.
4. Reset: When you need to restore factory settings or set up the operation keyboard, please short-circuit the reset port, after a beep, press the 12 keys to operate any key of the remote control, and hear the "tick" three times, after the reset, the data of the user card and the remote control for opening the door will not be lost, and other functions will be restored to the factory settings.
Avoid unprofessional disassembly
The internal structure of the fingerprint password lock is relatively complex, if you don't know too much about the fingerprint combination lock, it is not recommended to disassemble it privately. Of course, if it is necessary to disassemble, it is recommended to read the manual carefully first, or consult professional after-sales personnel.
To reset the fingerprint, you can delete and add the fingerprint through the administrator, but different series of products are different, and the specific operation is subject to the manual. >>>More
Nalgae fingerprint lock and klinda are certainly not the same brand, klinda's head of operation used the nalgae brand in the early stage, but later due to product quality problems, the nalgae brand refused to let it advertise as a nalgae product, so later klinda appeared on the market, many products with nalgae standard with quality problems in the early days, i am one of them, i am a hundred sunshine, last summer, once our family went down to spread, because the child was only a few months, Often a whole family go down together, my husband was not at home at the time, more than half past eight in the evening, when I came back, my door lock could not be opened, the first reaction at that time was broken, the technology is unreliable, the mechanical key did not bring, quickly contact the manufacturer, the result was a situation of pushing back and forth, just started to contact the person who put the lock on me, a person surnamed Su, said let me call the company **, the result of the person asked me who to install, and then hung up **, at that time very detailed things can not be remembered, Probably such a process, to be honest, it was a very hot experience, and then it was estimated that the two of them were pushing each other, I was already very angry, and I couldn't wait to dismantle their company immediately, until more than nine o'clock, a person surnamed Chen said that he was the person in charge of, and later knew that it should be the boss, call me **, simply understand the situation, let me go to the hotel first, and say that I will arrange someone to deal with it immediately, don't let the old people and children suffer. There is a hotel in front of my house, I said that the children's small hotel has no milk powder, nothing, he asked me what brand my child drinks, let me find a comfortable place to stay first, said to come and deal with it immediately, and then the master surnamed Su came first, people may be far away, surnamed Su opened the door for me, chatted for a while, people arrived, their boss can tell the truth I was not so atmospheric, the surname Su is indeed not an employee of, first give me the relationship, the boss surnamed Su has never dared to take ** to solve it, Anyway, I was able to understand the various reasons for this, changed the new lock the next day, has been using, the two locks are indeed very different, at first I didn't pay attention to ***, at that time Nigae sent a fake announcement but didn't pay attention to *** didn't know this information at all, and then's boss had a move that moved me very much, he gave my child a red envelope, apologize! This matter has passed, and this question from the landlord suddenly reminded me of this unpleasant experience last year! >>>More
Xiaomi fingerprint lock is good, and the ** of about 2000 is cost-effective. >>>More
The benefits of fingerprint locks are the reasons you have to use. >>>More
Advantages of Semiconductor Fingerprint Recognition:
1. The semiconductor fingerprint recognition module can only identify the living fingerprint, with high security, that is to say, the semiconductor fingerprint head can penetrate the ** surface hair layer, so the silicone simulated fingerprint that is prevalent on the Internet basically does not play any role here, and the advantage of identifying the living fingerprint lock is that the fingerprint basically cannot be copied or imitated. >>>More