VB2008 Automated excel How to Wrap Lines?

Do you mean a line break in the same cell, or a line in the next line.

If it is a line break in the same cell, you should add the vbcr line change character before each time you write the result.

If it's going to the next line, then you should define a variable that remembers how many lines you've already written, and it will automatically accumulate the next time you write.

If the result is not written by the same program, then the variable may not be saved, so use traversal, and probe down a certain column before writing, and use the line number to detect that there is no writing on that line.

First of all, there must be a button, defined as commandbutton1, double-click commandbutton1 and write the following **.

private sub commandbutton1_click()'Add a new record button event to the worksheet.

range("f11").select'Select any one of the worksheets.

Move the cell selection to the last cell of the column where the selected cell is located.

Move the cell selection to the leftmost cell of the row where the selected cell is located.

The next step is to enter the text, and the above ** is used to insert a record at the bottom of the data table.

What is your program like?

However, you can figure it out for yourself by following the above ideas.

Hope mine is helpful to you.

Have a great day.

Set the alignment of cells to word wrap.

Select the row, and select [Format] - Row] - > the most suitable row height] from the menu

There must be some columns that are wider than the columns. That's why it's getting higher.

Observe that column of data is more words.。。 Adjust the width of the column.

It will automatically become small.

If it doesn't work. Double-click on the dividers for those line numbers...

Format-align-wrap cells.

Method 1: 1Open your Excel on your computer.

<>3.The contents of the cell are automatically wrapped, showing all the contents;

Method 2: <>

2.Select what you are operating, right-click, and select "Format Cells".

<>5.Cell wrap auto-wrap to show all content, if you don't need to wrap the line, check the check to cancel.

Method 1: In **, directly click "Automatic Word Wrap" to achieve the effect of line wrapping (the text will change with **).

Method 2: 1. Open Excel**, enter a line of text in the cell, press alt+enter to wrap the line, and then enter it.

Select the cell Format Cell Align Word Wrap (tick), or you can enter the text and press Alt+Enter to wrap the word manually.

Did you type the file in a cell? If so, you can pull the cell wide up by moving the cursor to the line number below or to the right line of the column marker, and holding down the left button when the cursor changes to a cross arrow and pulling down or right to the appropriate position. Then right-click - format cells - align - check before and after word wrapping.

The text will automatically wrap according to the width of the cell.

If you want to force a line break like this, you can press it where you need to wrap"Alt+Enter"and the text will wrap as it is now. Put a few more spaces in it, and the document will be what it is now.

However, excel is electronic, it is more convenient for calculation, it is more troublesome to write documents, and it is recommended to use word to write documents, and the document formatting function is powerful.

You can now use Start-Word Wrap to have more column width auto-wrap.

Or just use alt+enter to force a line break.

1.Select the cells you want to format.

2.On the Format menu, click Cells, and then click the Align tab.

3.Select the Word Wrap check box under the Text Control heading, and then click OK.

The data in the cell will automatically wrap to fit the column width. When you change the column width, the data wrap is automatically adjusted accordingly.

If all of the line break text is not visible, it may be because the line is set to a specific height. To allow lines to automatically adjust and display all newline text, point to Lines on the Format menu, and then click Best Fit Line Height.

Press Alt+Enter at the location of the branch to force a line break.

Cell formatting, alignment, word wrap can also be set.

alt+enter,,haha,many places are ctrl+enter,I can't change it too.。

Select the cell and right-click Format Cells Align Word Wrap (tick).

Press Alt+Enter in the cell you want to wrap.

Place the cursor where you want to wrap your line and hold down Alt and press Enter

Alt+Enter to wrap lines.

Click on the right to build, and there is a line break in the format, and you can choose it again.

Press enterOr press the arrow keys.

Press the Enter key to wrap the carriage enter.

I couldn't remember it before, but now I remember it, alt+enter

To solve this problem, you can't do it with Excel's own trigger events. Because Excel doesn't support key capture events, it can't do what you said. However, it can be done with events in the user form.

It's just a few more steps, you need to add a user form, a label label, and a textbox control. and two command buttons.

Leave an email and I'll send you an example to see if this method is right for you.

Modify the excel settings: make the cursor automatically turn to the right after pressing the enter key.

Go to the excel option, in General:

Change the carriage return to "right" first

Then select all the cells you want to enter.

According to what you said, there is no solution to the effect, because the event cannot be triggered when the cell is in the state, and you need to press enter or click on other cells to trigger.

By default, the system is like this: "When the first line deletes the text, the words in the second line will be automatically moved up to the first line", because they are all in a cell.

To make "the text after the line break is still on the second line", you need to press alt+ enter when the first line is ready to wrap.

Format the cells, align them, and wrap them on the line.

alt+enter, it will not automatically run the first row.

？What's the problem? I don't quite understand what you're saying.

Line feed: fix cursor - alt + enter.

1. Select cell A1, then right-click and select [Format Cell]. Or press the Ctrl+1 shortcut key to bring up the Format Cells dialog box.

2. Check the [Wrap] in the [Alignment] tab, and click the [OK] button when finished.

3. If the unit display remains unchanged after clicking the [OK] button, drag the labels between the rows and adjust the row height.

4. The above process can also be done directly by clicking the button on the menu bar.

The specific steps of automatic line wrapping by sequence number in Excel are as follows:

The materials we need to prepare are: computer, excel.

1. First of all, we open the required excel, select ** mouse right-click and select the "Format Cells" option.

2. Then we click on the "Align" option in that page.

3. After that, we click on the page to check the "Wrap" option, and then click OK.

Open an excel**, if the text in the 100 excel cells is too long, there will be two situations, the first is that the text of the previous cell covers the later cell, and the other is that the text in the cell is not enough to hide automatically.

In this case, you need to set up Excel** automatic word wrapping, select the cells that need to be wrapped, and right-click the mouse to select "Format Cells".

Select the "Alignment" tab, and then check "Word Wrap" in the text control option answer, and then you can make this cell wrap after saving.

If you have a lot of cells, then you need to set up word wrap for all cells, press the keyboard "Ctrl+A", or move the mouse to the intersection of the first column and the first row of cells as shown in the figure, click on the genus to select all.

Then like above, right-click to format the cells, tick the word wrap and you're good to go.

What about the serial number?

How to automatically wrap lines by sequence number in Excel:

1.For a single cell to wrap the process, you can directly right-click the cell and select "Format Cell".

2.Select "Align" in the pop-up options.

3.After the selection is completed, click "Word Wrap" and confirm.

4.For batch processing, the method is to select all the cells that need to be set, right-click on the property settings, and the settings are the same as those for a single one.

Select the row, right-click to format the cell, align, and check Word wrap.

If the line is still selected, press Ctrl+H to pop up the Replace dialog box and find the input behind the object.

2.Replace with the following input.

Alt+keypad type 10, then 2(here it looks like 2.)There is no difference, but there are line breaks).

Replace them all. Put 3 moreChange it like this.

Enter or copy-paste the following formula in C2.

b2&char(10)&b3&char(10)&b4 select C2 Ctrl+1 Align check Wrap drop-down fill.

char(10) is equivalent to manual alt+ente

"u3:u5").formula="=d3/10-5)*6+(e3/10-5)*2+(f3/10-5)*7+(g3/10-5)*"Potato Hall.

ps: If you don't want the line number to change automatically and poorly, you can add an absolute quote to them with the flag $

Excel Citations Rule: Absolute references are added"$"The column labels and row numbers are absolute addresses and do not change when the formula is copied to the side, and the column labels and row numbers without the absolute address symbol are relative addresses and will change when the formula is copied to the side. Relative references, absolute references, and mixed references refer to how the addresses change when you use a cell or range of cells in a formula, when you copy the formula to the side.

For example, if the A2 cell contains formulas"=a1", then excel can determine that the user wants the value of A2 to be based on the value of the cell immediately to the left. In practice, mixed references can also be used: there are both relative and absolute references in formulas, such as the formula in cell e6

C6+D$6, when the user copies the formula to E7 cell, Excel can recognize the absolute reference to column C of the first cell, as well as the relative reference to row 6 and the relative reference to column D of the second cell, and the relative reference to row 6, so as to copy the formula to: =$c 7+d$6;

In the upper right corner of the start menu in the excel sheet, you can see a word wrap logo, select the cell and click the word wrap;

After the line wrap mode is turned on, the cell will become what it is now, how other cells also want to wrap the line, then you can also use the format painter to click the word wrap. This doesn't look perfect, if the name has 2 words and 3 words, adjust the position and then wrap the line;

Special line wraps are actually one step, hold down alt+enter, which is the carriage enter in word. You can't press enter directly in Excel, you need to hold down the alt key at the same time.

1. Word wrap: Set the cell format, check the word wrap under the alignment tab.

2. Custom line wrapping: insert the cursor into the position where the line wrap needs to be inserted, alt+press enter.

It can be achieved by using the data automatic filtering function, how to do it:

Raw data: 1. Print digital rows: Custom: greater than or equal to 0

2. Print non-numeric lines: Custom: greater than or equal to"a"

Excel, page layout, page breaks, you can pagination the print area by yourself (the dotted line is one page, if it is multiple pages, it will be pagination several times.)

1.The problem is that the line height is not enough, so there are 3 solutions.

2. To adjust the row height, you can right-click to set the row height, or you can directly pull down the left row line several times;

3. Adjust the cell width in the same way as adjusting the row height.

4. Modify the font, you can modify the size of the overall font, or you can only modify the size of the font in the cell, and change the font to the extent that the preview can display all the fonts.