Why Local Connections Are Restricted No Connection First Aid

It's very simple, just set the IP for the local connection.

Tap on the computer and connect to the Internet. Local connection. Attribute. Remove the hook.

Or check my computer to see if there is a question mark in the device manager! If you have one, you need to install a driver.

If you exclude the factors that restrict you from surfing the Internet, it is generally not good contact, poor data transmission, and the common situation is to obtain an IP for a long time and finally prompt that the local connection is restricted! Check to see if the line is plugged in!

Did you use a router? Unplug the router and try it, if you can, the router will have problems, but not network and setting problems.

The restriction is because the local connection is not opened, that is to say, the switch is not running, and the inability to connect may be your local connection is not done well when it is created, you can disable the local connection first and then enable it If not, you can re-establish a local connection, I hope it can help you!

I don't know what equipment you have connected, has the router turned on DHCP? If it is manually entered, choose to get it automatically, and try to eliminate the setting problem, generally there is a problem with the network cable, if there is a router connected, the problem of the network cable is eliminated, that is, the router is broken, or the DHCP function is not on.

Some ADSL users are on Windows

Under the XPSP2 operating system, the built-in PPPoE dial-up mode of the Windows system is often used for broadband dial-up Internet access. However, when using this method to surf the Internet, these users may find that the display status of the "Local Connection" icon in the network connection list window is often inexplicably adjusted to "Restricted or No Connection", but the Internet operation can be carried out normally in this state. So how did this strange state display glitch occur, and how do we eliminate it?

If the "Local Connection" display status changes to "Restricted or No Connection" for no reason, this is usually due to the fact that the NIC is not assigned a fixed IP address. Under normal circumstances, when we find that the display status of "Local Connection" is abnormal, we can often try to set a static IP address for the network connection first, which can often solve many inexplicable network failures for us. Once we find that the local network connection does not use a fixed IP address, we can click the "Start" "Settings" and "Network Connection" commands in turn, and then in the network connection list interface, right-click the "Local Connection" icon with the mouse, and execute the "Properties" command from the right-click menu to open the property setting window of the local connection; In the "General" tab page of the window, select the "Internet Protocol" item and click the "Properties" button once.

After that, check the "Use the IP address below" option, and try to set the IP address of the local computer to ", and then set the IP address of the local gateway to "By default, the factory IP address of most ADSL devices is, and finally click the "OK" button, and restart the computer system, I believe that the state limited fault of "local connection" can be solved most of the time.