The temperature of the graphics card is high, the fan is not at full speed, and the temperature of t

The GTX260+ uses GT200 cores, and every 8 stream processors in the GT200 form an array of stream processors.

TPA), and every 3 stream processor arrays form a stream processor cluster (i.e., 1 cluster contains 24 streams.

The GT200 contains a cluster of 10 stream processors (i.e. 240 stream processors), and the GT200 displays the core.

The temperature is higher than that of G92, and it is normal for the temperature to be high, with a standby temperature of 28 degrees Celsius at 55 degrees Celsius to 60 degrees, and a maximum of 75 degrees at full load

degrees are normal, it is recommended to change to an overclocked three black sea silent radiator, this one can be installed with 2 x 9 cm fans or.

3 8 cm fans, no matter how high the power consumption and temperature are not a problem, and it is completely 0 dB heat dissipation, only.

It's a little more expensive, more than 260 yuan, think about a graphics card of more than 1,000 yuan and stability in the future, this money.

It's worth the flowers

Is 75 degrees hot? It doesn't matter if it's 90 degrees on the graphics chip, so fans think it doesn't matter.

Clean up the dust of the whole machine! The temperature of the graphics card at 75 degrees is not high, but you should pay attention to dissipating heat from the case, and the air-conditioned room will be better.

Leave your name and wait for the answer I also had the same problem.

I downloaded a graphics card overclocking software and locked the fan speed directly.

Reasons for the high temperature of the graphics card: Generally, the temperature of the graphics card is too high, most of which is due to poor heat dissipation inside the chassis or the slow speed of the graphics card fan. Poor contact between the graphics card chip and the heatsink; The thermal grease on the graphics card chip is missing or dry, and the thermal conductivity is lost; The speed of the cooling fan of the graphics card is not enough, and the power is insufficient; The last case can be caused by a hardware failure inside the graphics card. The solution to the overheating of the graphics card:

1) Observe whether the graphics card cooling fan is running normally, add some lubricating oil to the graphics card cooling fan, if the fan is not damaged, you need to buy a new cooling fan again, if you are not a professional, please remove the graphics card, and directly take it to the IT store to ask someone to replace the fan, which can generally be solved; (2) If the inspection finds that there is poor contact between the graphics card chip and the heat sink, you need to apply thermally conductive silicone between the fan and the graphics card core; (3) If it is due to too much dust inside the computer, there is not enough heat dissipation, we can dust the host, the easiest way is to take a high-power hair dryer to blow hard inside the chassis for a while, or disassemble each accessory, clean up the dust separately, if you are familiar with the computer, it is recommended to remove the internal hardware to clean up the dust; (4) In addition, due to the possible use of inferior chassis caused by the internal heat dissipation air duct is not smooth, we can disassemble the chassis shell or install a convection cooling fan on the chassis to reduce the temperature inside the code core or host, so that the heat emitted by the graphics card can be quickly taken away to strengthen heat dissipation, and if there is no condition, you can directly take the fan to blow the inside of the chassis to strengthen the heat dissipation to solve the high temperature of the graphics card, if the above methods can not effectively reduce the temperature of the graphics card, in most cases, the graphics card is faulty, It is recommended to take it to a professional repair shop for testing.

Hello, the above questions will be answered by me. The temperature of the graphics card is not high, but the fan speed is the fastest and the sound is loud to solve the specific method: 1. Heat dissipation capacity Which Xindan 1, if the graphics card fan is loud, it means that it is working at full strength.

2. If it appears when playing a large game, it is normal, there is no way. 3. If there is one all the time, it may be that your computer's heat dissipation capacity is insufficient, resulting in the need for full heat dissipation. 4. At this time, you can try to clean up the heat spramble of the case, but if it doesn't work, you can also add an external radiator to improve the heat dissipation capacity.

What to do if the discrete graphics card fan is loud and buzzing Solution to the buzzing fan of the computer graphics card 5. In addition, if the temperature is not high, the fan will still keep turning. 6. We can try to use the software of the graphics card to reduce the speed of the fan, and the sound can be reduced. 7. NVIDIA Inspector can be used for N card, and AMD Catalyst Control Center is for N card software.

What to do if the discrete graphics card fan is loud and buzzing How to solve the buzzing fan of the computer graphics card Second, the fan is faulty 1. The fan will accumulate dust seriously after long-term use, and the internal lubricating oil will not be enough. 2. At this time, we can disassemble the graphics card fan, clean up the dust, and add lubricating oil to solve the problem. 3. In addition, if the fan is damaged, it will also increase the noise, so it can only be solved by replacing the fan.

Hope it helps!

Under normal circumstances, the graphics card becomes hot after the system runs for a period of time, and after it is heated to a certain extent, it will run at full speed to ensure the heat dissipation of the graphics card.

The problem can lie in three places.

One motherboard, the settings of the motherboard are restored to default. Especially the power of the power supply and graphics card. Be sure to adjust to normal power.

Second, half of the graphics card and graphics fan card are running wildly, and half of them are caused by poor heat dissipation or unstable power supply. The reason may be the power supply and motherboard, but it may also be caused by the unstable function of some components inside the graphics card itself. Now the graphics card is also cheaper.

Either remove the graphics card and check it. Or change a piece?

3. Power supply. It may be caused by an unstable power supply. Although the odds are slim. If it really doesn't work, try changing the power supply. What really works is to restore the motherboard to factory settings. Or find the original driver of the graphics card and install it.

Is it overclocking? Or do you want to set the speed to death?

I've encountered that the CPU fan has been running at high speed, and then I checked that it was set up in the BIOS, and you can also check it.

1.Because only part of the output of the power supply may be unstable, it is recommended to use OCCT to test the stability of the power supply voltage.

and the fan of the graphics card can support PWM, if the CPU and graphics card core temperature is not high, the speed will not be very high, this speed has no correlation with the temperature of the north and south bridges.

3.The failure of the capacitor may also be due to the unstable current and voltage, which may cause the temperature of the capacitor to be too high, and the cause of this result is probably the unstable power supply.

4.It's better to add a voltage regulator than to buy a good power supply.

The BIOS of a graphics card is rarely officially updated.

If the load of the graphics card is 60 degrees, it is not a very high temperature, and if it is idle at 60 degrees, see if the radiator is fixed, in addition, if you have the effort, you can disassemble the cover of the graphics card radiator and sweep the dust, dust is one of the culprits that hinders heat dissipation.

Is your previous temperature measurement software the same as the current version?

What you're saying about externalcache is a prompt for you to disable? Didn't get it.

The graphics card fan is controlled by the graphics card according to the GPU temperature, this cannot be controlled, if you feel that the graphics card fan is abnormal, if the speed is not high, you can solve it like this.

1. It may be due to insufficient power supply. Please check the circuit connection, as well as whether the power supply is enough 2, the fan radiator is ashed, and the ash can be cleaned.

3. The silicone on the GPU is aging, you can remove the fan and redo the silicone 4. The graphics card fan is aging, and you can replace it with a cooling fan.

The speed of the fan is automatically adjusted according to the temperature of the host, and the low temperature of the host will naturally reduce the speed, and the speed will change quickly when the host temperature is high. Therefore, the landlord said that the speed is abnormal, first of all, to eliminate the above factors.

It depends on how many lines your fan is, if it is a 3-wire one, it should support automatic speed regulation, this is the same as a CPU fan, when the load is not large, the speed is low, and the speed is adjusted as the load changes.

If there is no overheating or no noise, there is basically no need to worry!

The intelligent cooling of the graphics card fan allows the fan to be at full speed when the graphics card is running at full speed, and the fan slows down when the graphics card is in standby.

Oil the fan, don't accumulate too much dust in the case, and blow it off with a blow head from time to time.

This graphics card is temperature controlled, and there is a temperature control chip that controls the speed of the fan, and this temperature control chip will automatically adjust the fan speed according to the GPU usage. It is recommended that the landlord restore the settings to reduce noise and extend the life of the fan. The landlord doesn't need to deliberately look at the speed of his fan, if there is an overheating phenomenon, he can look at it.

After the appraisal is completed, the boss will give points

1. Not necessarily. For example, the graphics card represented by the GTX960 has begun to use a stall technology, and the graphics card fan will not rotate all the time.

2. The graphics card with intelligent stop technology, when the load is low and the temperature is low, the graphics card radiator fan stops rotating, and only when the power reaches the set upper limit, or the temperature reaches the set upper limit, the graphics card fan will start to rotate. The heatsink fan of a graphics card with stall technology does not rotate all the time, and only turns when running high-load tasks such as 3D games.

3. Taking the GTX960 intelligent demolition technology as an example, the following 4 start-stop standards are implemented:

The temperature exceeds 69°C and the fan is automatically started.

Below 43 degrees Celsius, it automatically stops.

The load exceeds 60W and the fan is automatically turned on.

The load is low, and Takano automatically shuts off the fan at 32W.

Note: Reach any of the above.

The fan will start and reach both of the above at the same time.

The fan will stop spinning;

There are two benefits to adding this technical feature, the first is to be silent, and the second is to extend the life of the fan (most of the time you look at the web page or look at **, this is only counted as low to medium load, and the fan is resting).