How do you get the labels off the porcelain cups and glasses?

Soak in hot water for a while to allow the glue on the label to soften, then just brush it casually! Generally speaking, it can be removed by soaking in water overnight, and if it is not clean, use a cleaning ball with a water brush!

The most commonly used thing at home is to use a hair dryer to turn on the hot air and blow it, and when you feel that the label is hot, you can directly remove it by hand.

If there is still a little sticky glue left on it, you can remove it with nail polish remover, wind oil essence or eraser!

Method 1: The hot air shield of the hair dryer is blown for about a minute, and the self-adhesive can be easily removed when it is soft.

Method 2: Use a paper towel to wipe the wind oil essence, and the self-adhesive can be softened and removed quickly.

Method 3: Apply sunscreen and wipe it off after 10 minutes.

When you can't tear it off, dip a cotton swab in some water (it is said that lemonade works better, we have tried it) (if the item can be soaked in water, put it in water) Soak the surface first and tear it off.

Then use the eraser to clean it up.

Leave a lot of glue, sticky, black and clean with an eraser.

This is the method in the magazine Discovery.

Heat it with the hot air of a hair dryer, then apply a small amount of vinegar, let it sit for five minutes, and then scrape it with your fingernails, it will be easy to scrape.

Use a lighter, gently test it on the label**, and it's good to go through it, or there is a hair dryer hot air shield to blow it, and it's good.

Use a hair dryer to turn on the hot air and blow on the label for about 15 seconds, and it will come down as soon as you lift it, and there will be no glue left on it, and the label will be as good as new. **2 sets of life hacks to school, very easy to use, every time you encounter this kind of problem to solve it in this way, it is very convenient, and other materials such as plastic, steel and so on are applicable.

Soak in hot water too much, and it will fall off. If you don't drop it, gently scrape the cup with your hands or a blade, and it will easily fall off. I've had this issue as well.

The hair dryer blows the heat, blows the glue soft, and you can remove it, in fact, the principle is similar.

Drop a few drops of wind oil, soak it, and then wipe it with a dry cloth.

Rub vigorously with a hot towel and it will fall off in a while. Thank you.

Blow it hot with a hair dryer and it will come down in one go.

Freeze it in the fridge, then take it out and scrape it with a knife, which is an extension of the method of using bubble gum on clothes.

It fell off when it was dried.

Warm the towel on the label and it will be easy to remove after a while.

Soak it in salt water and scrape it all at once.

Soak in water for a while, then tear again.

Wet the label with liquor and then use a blade to shut.

Blanch with hot water and you're good to go.

Soak it in hot water or use cool oil.

Soak in hot water with a hair dryer.

Rinse and wash with hot water, and add vinegar to the more stubborn ones.

I've seen it in many places and said to blow it with a hair dryer, but I don't know if it works, so let's try it.

The dish soap steel wool ball can be cleaned.

Tools: Raw BAI, Computer Thermal Transfer Printing, DU

Machine heat transfer printing ink heat transfer paper heat transfer cup heat dao transfer baking machine auxiliary materials: inner hair dryer, paper cutter capacity, high temperature tape, image software production method: the first step:

It is necessary to make it with image processing software. Step 2: Use the thermal transfer printer to type out the ** we made.

The third no: cut out us with a paper cutter**. Step 4:

Fix the ** to the heat transfer cup with high-temperature tape. Step 5: Set the temperature and time of the heat transfer baking machine, and then put the pasted ** cup into the heat transfer baking machine for printing.

Step 6: The heat transfer baking machine prompts the sound, take out the cup, tear off the heat transfer paper, and the cup is completed. Notes:

The front and back of the pressure paper of the baking machine's pressure paper is printed.

The laser is better! The adhesion of the adhesive is not strong! :

How is the pattern on the cup engraved? Do you want to know?