What should I do if there is no response after the mouse is connected, and there is no response afte

Updated on number 2024-05-12
7 answers
  1. Anonymous users2024-02-10

    Maybe you've got too many things loaded on your boot! For example, if all your users load too much stuff, they will naturally be gone, and the mouse will freeze the frame.

  2. Anonymous users2024-02-09

    Right-click on my computer, click on Properties, click on Hardware Options, then click on Device Manager, click on the Hidden Window of Zheng He to open the mouse and other pointer devices, click on the right-click to uninstall, and then click on the blank space to right-click to scan and detect hardware changes

  3. Anonymous users2024-02-08

    Friend, you are using a round mouth mouse bar (ps 2) interface, you need to restart the computer to use. After the ant turns off the excitation laughing machine, reconnect it again, and Minghan can use it when it is turned on again.

  4. Anonymous users2024-02-07

    Is it an old-fashioned PS2 mouse plug?

    Yes, if it is useless to plug it in the system, it must be plugged in before turning it on.

    You can restart it and re-enter the system to see if it works.

    Note: Look at the pins of the mouse, do not fold them.

  5. Anonymous users2024-02-06

    1. Open Windows Explorer, check the abnormal process, if there is a process that occupies a lot of CPU, it may be caused by a virus or Trojan horse, right-click to select the end process to end the abnormal process.

    2. Then use antivirus software to check and kill viruses on the computer, and restart the computer. If it's because Windows Explorer stops working, the user just needs to re-run it; If it is caused by a virus and the situation persists after the above methods, it is recommended to reinstall the computer system.

  6. Anonymous users2024-02-05

    The green plug is generally a PS 2 interface, which must be plugged into the corresponding port of the motherboard in the shutdown state to work normally.

  7. Anonymous users2024-02-04

    Your mouse button is broken! Therefore, it caused poor contact, and the only way to encounter such a problem next to Jian Ying was to replace the micro-movement with (soldering iron + rosin + solder wire)!

    Go online and buy more than a dozen micro movements, more than one ordinary one, 2 good ones, and 7 most expensive ones.

    Some references for players who buy for themselves:

    The order of the fine and bad of the micro movement is arranged.

    Omron White Point D2FC-F-7N < Omron White Point D2FC-F-7N (10M) "Omron White Point D2FC-F-7N (20M)" "Nissan White Point D2F-01F-T

    The last of them costs at least 7 yuan, but the reputation of the feel is better than the others.

    If you can't, or if it's troublesome, go to Diansong Meng's Brain City and find someone to help you change it, ranging from 10 yuan to 15 yuan.

Related questions
10 answers2024-05-12

Please make sure it's January 1, 2008 (computer time).

Open the license and look up the next 2007 and found that it is the same 1 string as 2007 31 sat 2007 (this English I scribbled anyway is English and is the abbreviation of December) found this easy to solve. >>>More

9 answers2024-05-12

Are you sure your optical drive is working properly?

1.In the device in the BIOS, see if your optical drive can be recognized, if it can be recognized, see step 3, if not, see step 2. >>>More

7 answers2024-05-12

My computer was the same some time ago, the power light flashed when it was turned on, the hard disk light did not order, there was no alarm, the power supply fan and CPU fan were also turning, but the monitor could not be lit. I began to unplug and unplug the memory module, still no, afraid of bad contact, unplug the wires in the host again, still no, I got it for a long time, didn't do it the computer there, after a while, and then clicked on, beep, it turned on smoothly, (it was estimated that it was too hot), and then I restarted the computer, the problem came again, I couldn't turn on the machine several times, and after hanging there for an hour, I turned on it again, and entered the system smoothly. I didn't dare to turn off the phone at will these days.,Once the phone is turned off, I have to wait an hour to turn on normally.,Everything didn't work until yesterday when I changed the memory.。

14 answers2024-05-12

The computer mouse and keyboard didn't respond to what's going on.

6 answers2024-05-12

1. Press [CTRL+SHFIT+ESC] to open the task manager;

2. Click [File] - [Run New Task]; >>>More