Why does my computer not respond after putting in a disc?

Are you sure your optical drive is working properly?

1.In the device in the BIOS, see if your optical drive can be recognized, if it can be recognized, see step 3, if not, see step 2.

2.There are two reasons why it cannot be identified, one is that the data cable is broken, and the other is that the power line is broken. If pressing the switch door button of the optical drive can be used normally, it means that the data cable is broken and can be replaced.

3.It could be that there is a problem with the disk, or there is a problem with the optical drive itself. Change the CD disk, if it can be read, you can rule out the problem of the optical drive. If you can't read it, the optical drive will basically be useless.

4.If you're sure that your disc and drive are fine, make sure your disc drive can read out your drive. If the disk is ***, only *** rw, ***-r, Combo's optical drive can be recognized.

5.Certain viruses and programs may also affect the reads.

Please follow my steps one by one, if the problem still exists, please add an explanation.

disk. Or, your CD-ROM drive supports CD.

And the dish is ***, so there is no response.

If the connection is not good or the optical drive is broken, it is recommended that you change to an optical drive.

Plug the optical drive cable back in, or uninstall and reinstall the optical drive in the Device Manager. It's not good yet, the light drive is broken, so let's change it!

1.disk.

2.Problems with optical drives.

3.Aging of the laser head.

4.Is it to confine the disc drive while playing the game.

I don't know if I can help you.

1. There is a problem with the optical drive.

2. There is a problem with the disc.

3. The CD drive does not read *** discs.

Do I have a drive letter for an optical drive in my computer? Can't read all the plates?

The reasons why the computer does not respond after inserting the disc are as follows:

1. It is possible that the disc is broken.

2. There may also be compatibility problems with the optical drive, such as ordinary CD drives can not read *** discs.

If that's the case, right-click on My Computer -- Properties -- Hardware -- Device Manager. See if there is a cd*** option, and if there is an uninstall, restart the computer. If no new hardware is scanned.

I still can't find it, maybe there is a problem with the optical drive. The repair value is not high, and it is recommended to replace the optical drive.

The reasons and solutions for the computer not responding after the computer drive is put into the disc are as follows:

1. Optical drive. Most of the problems of the optical drive are as follows: dirty or damaged optical head, laser power drop or defocus, poor error correction ability, faulty decoder board, disconnected data or power cable, or poor contact, etc.

Any of these problems may result in not reading the disc or selecting the disc. Replacement of each damaged part makes good contact;

2. CD-ROMs. The problems of optical discs are as follows: disc quality problems (including the quality of blank discs and the quality of burning, whether the disc surface is damaged, etc.), disc deformation, disc format problems, etc. Some plates are regionally restricted. Switch to a good quality CD**;

3. The optical drive cable is not connected. Connect the connecting wires;

4. The disc is not placed properly or the optical drive driver is not the latest version. Reposition the disc.